This thesis is performed at Saab Bofors Dynamics in Karlskoga and investigates a technique for ranging with laser pulses. The investigated technique is called Constant Fraction Detection (CFD). Described briefly, the received laser pulse is split into two equal parts, where one part is delayed half the pulse width and inverted. This signal is added to the original pulse. The resulting curve has the shape of a laying S and the detection of the zero level is used to stop the time measurement.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

Förädlingsarbetet på vårtbjörk (Betula pendula Roth) fick ett uppsving på slutet av 80-talet efter en ändrad opinion om björkens betydelse. En ny förädlingsplan togs fram med mål att förädla fram tidig höjdutveckling, högre torrsubstansproduktion och bättre virkeskvalitet. Syftet med denna studie är att undersöka möjliga förbättringar av vårtbjörk utifrån mätningar av ett försök med halvsyskonfamiljer. Detta genom beräkningar av heritabilitet, genetisk vinst, variationskoefficient och korrelationer för egenskaperna diameter, höjd, vitalitet, klykor, rakhet och grenstruktur, vid 10 och 21 års ålder. För den statiskista analysen användes en mixad linjär modell som kördes i programmet ASReml, vilket bygger på restricted maximum likelihood metoden. Resultatet visar att förädlingsmöjligheter för vårtbjörk är goda speciellt för höjd och diameter, genetisk vinst är skattad till 20 % respektive 25 %. Klykor, rakhet och grenstruktur, visade inte lika lovande resultat, genetisk vinst låg på 13 %, 7 % respektive 7 % vid år tio. Korrelationerna mellan egenskaperna tyder på svårigheter att förädla för både bättre tillväxt och kvalitet, till exempel diametern vid år 10 har en negativ korrelation med grenstrukturen vid år 21 på -0,681..

Piles of deadwood are often retained in forests after management to support the biodiversity ofsaproxylic organisms which depend on deadwood to survive. Any knowledge about the crucial role ofpiles as suitable habitat of saproxylic organisms compared to single distributed deadwood objects thatare around the piles would help conservation actors to motivate more forest owners to supportsaproxylic organisms during their management. Therefore to give facts to this the saproxylic fauna ofdifferent pile positions (up and low) was studied and compared to distributed deadwood samplesaround each pile. Our study was focused on saproxylic beetles. Some other parameters such asdiameter, deadwood volume, pile volume and decay stage were assessed to define any effect.

This thesis describes the planning and development of a volume meter of pine and spruce cones. The product was designed and developed for Stigsjö Skog och Frö AB in Härnösand. It was developed taking into account a number of requirements set by the supervisor David Zetterlund. The main requirements were that the volume measurement would be fast and give accurate results. These are two requirements that are missing in today's volume measuring method which is very problematic for the company.The plant was visited several times in Härnösand, mainly to discuss the generated concepts with the supervisor and perform tests on the prototype.

Evaluation of joint swelling is an important part of the orthopedic examination and can be used to follow a patient?s progress during rehabilitation and therapy. Usually a swelling is assessed by palpating the joint but a more objective, but still easy to use, method would be preferable.This study seeks to increase the knowledge in veterinary rehabilitation by validating four different measurement tools (three recognized and one novel) for the assessment of elbow joint swelling: palpation, tape measure (circumference and figure eight measurement), slide caliper (craniocaudal and mediolateral positioning) and tonometer. This was achieved by calculating the inter- and intra-rater reliability and correlating the results from the different measurements with each other.The methods with best inter- and intra-rater reliability as well as good correlation among themselves were shown to be slide caliper with craniocaudal positioning, circumference and figure eight. Additional studies, with a larger and more diverse material, ought to investigate these methods further..

Cardiac troponin I (cTnI) is considered a specific and a sensitive biomarker of cardiac disease, and due to a high inter-species sequence homology; human cTnI assays can often be used in veterinary medicine. The main aim of this study was to perform an initial evaluation of a human cTnI test, the Meritas Troponin I test, for measurement of equine plasma cTnI, in order to investigate whether the test could be a possible subject for a more comprehensive validation. The hypothesis was that the test could measure equine cTnI, as there is a good homology between equine cTnI and human cTnI. The evaluation included a dilution parallelism, an intra-assay precision study and measurement of plasma cTnI healthy horses. In the dilution parallelism and the intra-assay precision study, equine plasma with previously established high cTnI concentration, according to another cTnI assay, was used. In addition, cTnI concentration was measured in plasma, collected from 19 horses, without signs of disease at physical and ECG examinations. The obtained curve in the dilution parallelism was linear, indicating that the Meritas Troponin I test can be used to measure different concentrations of equine cTnI in plasma.

The aim for this study where to investigate the frequency of cutting cracks in saw timber harvested in the storm-damaged forests in regions where the storms Hilde and Ivar hit. The idea for this work came from one of the region?s biggest actors, SCA Skog and Jämtlands district. The purpose where to find out how big proportion of the saw timber that contains cutting cracks, their financial cost in lost wood value and also give advice and suggestions on how to work against the frequency of cutting cracks. For the field-study some guidelines where used to make sure that the samples were taken under the same conditions, they were: ? The field-study must be performed under harvesting of storm-felled forest, which are horizontal/inclined trunks. ? The averaged sized tree will make it possible to harvest saw timber. ? The trunks can?t be root cut. A methodology called in Swedish ?Trissmetoden? was used because it is the most frequent used methodology in earlier performed studies and the only one that can be used I field. Under the field-study data were collected from 570 saw timber logs, 30 logs from each one of the tested harvesters.

The effect of methyl jasmonate on resistance against the large pine weevil (Hylobius abietis) in Scots pine and Norway spruce seedlings. A field experiment was conducted in order to determine the dose-response effects of methyl jasmonate (MJ) on growth and defence to pine weevils in Scots pine (Pinus sylvestris) and Norway spruce (Picea abies) and to compare the effect of MJ between pine and spruce. In addition a complementary greenhouse experiment was conducted with the same aims as above and to determine the amount of resin ducts and their correlation to the feeding of pine weevils. The field experiment was conducted on a fresh clear cutting in Garpenberg, southern Dalarna in central Sweden. The experiment consisted of 30 blocks with three kinds of containerized seedlings: 2-year old spruce, small pine (before shoot elongation) and 1-year old pine (already shoot elongated). They were all exposed to 4 treatments 14 days prior to the experiment: control, 25 mM/L MJ, 50 mM/L MJ and 100 mM/L MJ. Data on weevil damage and seedling growth were collected after the first and the second growing season. The seedlings in the greenhouse experiment were of the same kind and were exposed to the same treatment as the ones in the field experiment.

This report describes a study, description and testing of parts to an application adapted to the operating system Android. The application is supposed to measure the distance to a car ahead. Apart from distance measurements the ability of the application to calculate its own speed with the help of GPS is tested. From these two parameters, speed, distance and some constants the theoretical stopping distance of the car will be calculated in order to warn the driver if the car is too close to the car ahead in relation to its own speed and stopping distance.Tests were conducted on the different applications that were programmed and the result showed that the camera technique in the mobile phone itself limits the maximum distance of the distance measurement application. The max distance the tests in this thesis revealed was approximately 5 meters.

The aim of this thesis was to analyse BARO WOOD AB:s timber measuring and quality sorting and to evaluate the analyse program Stockholmen. The purpose was to get a better understanding for the quality sorting made at BARO WOOD AB today, analyse differences in center board quality from logs with a good quality and logs with a bad quality, suggest new sorting criterias developed from analyses made with Stockholmen and to evaluate the program Stockholmen. All analyses are based on data gathered in a test sawing made at BARO WOOD AB in June and July 2002. The test sawing was made on four different diameter classes and every diameter class consisted out of A or M-grade logs, with a better quality, and B-grade logs with a lesser quality. The logs where sorted out with BARO WOOD AB:s existing quality criterias.

The purpose of this study has been to investigate advantages and problems with distributionsystem metering in substations. This report is a study in cooperation with Göteborg Energi.The analyses in this report are made for GENAB, a subsidiary company of Göteborg Energi.To analyse advantages and problems in advance is interesting information for GENAB. Theresult of the report could be based upon whether installation of metering in distributionsubstations will be implemented and in that case which kind of measurement that is relevant.The most relevant and strategic place to implement measurement is at the distributionsubstations on the secondary side (400V), this is due to the placement of the currenttransformers. The measurements in this study involve current, voltage, power, power factor,temperature, energy and power quality.Measuring instruments that are relevant to implement are intended to measure current,voltage, power, power factor, energy and, possibly, power quality in the same measuring unit.It is desirable to have a measuring instrument that measures both energy and power qualitybut since it is most often a cost question, it can be established that energy meters have a lowercost.Metering in distribution substations gives a better illustration of the power network. Thisresults in many advantages for GENAB.

De senaste åren har stora tågförseningar skett på vintern, ofta hänvisade till som växelfel. Dessa växelfel beror ofta på att snö och is fastnar i växeln och på så vis förhindrar växelns huvudfunktion. Snön hamnar i växeln dels genom snöfall, men även på grund av att snön skakas av från de passerande tågen. Förseningarna, som beror på snö och is i järnvägsväxlar, är ett stort problem som påverkar många människor. Syftet med detta projekt blev således att undersöka hur detta problem kan lösas.Idag finns redan flera varianter för att lösa detta problem.

Purpose: To examine the hearing environment for tattoo artists regarding occupational noiseand to see whether tattoo artists are exposed to hazardous noise according to Swedish WorkEnvironment Authority regulations. Method: Using a dosimeter we measured a total ofseven sessions of approximately one hour on seven different subjects, located on five studiosin Gothenburg. As a complement we did also hand out surveys based on twelve questions toexamine habits, experienced sound environment and to see if there were any hearing relatedpatterns. Results:. Sound level measurements showed that the lower exposure action valueLpAeq,8h 80 dB(A) in one case was reached if applied to the average working time of sixhours.

The Yara N-Tester is a handheld chlorophyll meter which can be used in several different crops as an aid to determine if there is a need of complementary fertilization with nitrogen (N) or not. If the crop requires more N the N-Tester will recommend an amount in kg per ha. The possibility to assess the need of N depends on the strong relation that exists between chlorophyll- and N-concentration in the leaves of plants. In the multiannual trial series ?Nitrogen to winter wheat at different soil conditions? measurements with the N-Tester was carried out at flag leaf emergence (GS 37). In this work the result of measurements, the NTesters ability to estimate the need of N in winter wheat, will be presented for the years 2008-2011.