An information system is something that evolves over time to enhance the company that is using it. The technology for building an information system is also evolving. New methods and new programming languages make system development easier. As new technology breaks ground and the demands of a company?s information system grow, the company will sooner or later get to a point where a change in the base of the system is necessary.

This report is the result of a master thesis carried out by the author, student at the Royal Instituteof Technology(KTH). The task was performed as a product development process at a companycalled Ameibo AB, located in Stockholm. It is the final task of the studies at the Master'sprogramme Design and Product Realization. The report is structured in a chronological order anddescribes the methods used, the implementation of these methods and a presentation of theresults given from these studies.Ameibo is a company located in Stockholm, distributing films on the internet. The aim of thismaster thesis was to investigate the possibilities of entering the market for portable devices.

Given that the end-customer has become more demanding, the retailer has to deliver products according to the market demands, which have forced manufacturing companies to constantly search for new opportunities to reduce costs and improve efficiency. It is, therefore important to choose suppliers that are able to compete with the market demands.The market demands in the textile industry have lead to shorter product life cycles, which have caused manufacturers to deliver flexibility with high technology to compete successfully on the global market. To achieve the market requirements the underlying factor is to be aware and optimally use and control time. New technology can have a major influence in the production development, if the company choose to take benefit of the advantages, by optimal allocation of the internal resources the productivity and efficiency will increase, to accomplish a competitive advantage. One way to achieve this is by investing in a Unit Production System.In our thesis we have questioned what the main driving forces for an apparel manufacturing company is when it chooses to invest in new technology.

The thesis is about exploring possibilities for developing a standardised system solution for micro businesses, this since most of the micro business lack proper system solutions, a contributing factor of this is price and also incompatibility between the solution and the business itself. The system solutions we will refer to are solutions which task is to cover the most important needs that a micro business might have on their system. The main goal with this research is to see if this is possible, and if so, how the developers should think to take it further. We chose to do this by identifying the most significant of needs a micro business has when it comes to this type of system solution.In this thesis we will present three needs which were evaluated and brought forth through the analyses of various interviews and observations we had done during the study. The interviews took place at respective company with their employees and consisted both closed and open questions with our main focus on the open questions because we wanted to obtain as much information from the respondents as possible from several viewpoints.

The information technology development that has occurred over the past decade has broughtmajor changes into people?s lives. We have gotten used to being constantly connected to theInternet and always having access to information through mobile technology. This has led tochanges in education and more and more courses have become available through Internet. Theseweb-based educations are nowadays very common in schools and in the business world as theyprovide increased flexibility for the user.Habiliteringen Lundbystrand has seen the potential in this kind of education and believes this isan opportunity for them to rationalize their work by replacing parts of their education for parentswith a web-based education.

Abstract This paper focuses on whether individual development plans as well as action programmes are needed.Pupils in need of particular support get to be involved in an action programme ? the school needs to provide any particular support a pupil needs. However, the individual development plan does not substitute the action programme. Thus an action programme as well as an individual development plan will be provided to students in need of particular support.The individual development plan follows the pupil throughout the entire education, regardless of whether its content changes, whilst the action programme pertains to a limited period of time. Pupils that are not in need of particular support are not likely to need to set goals for themselves in addition to those already set outside of school.

The purpose of this study was to examine how modern information and communication technology influence collective action within the framework of social movements. By studying the protests in the Arab World 2011, and focusing on the social movements in Suleimanya in northern Iraq, by observation taken on place, the essay discusses that collective action is closely related to the use of technology, for example cell phones and Internet.Result shows that modern communication technology has enabled immeasurable access andconnection between individuals throughout the world, which seems to be different from previouscollective action. The new communication channels in the form of social media, has been used for the dissemination of information and news, documentation, organization and membership recruitment in the social movements in the Arab World and Suleimanya. The new social movements have the tendency to be decentralized and flattened organized, they are now self-organizing and that they only do a whole as global patterns, as evidenced by the social movements in the Arab World andSuleimanya..

Strategic development is something that concerns all companies, regardless of which industry they?re in. There is extensive research on this topic but one can question if the same theory also applies to E-businesses. Using case studies, this paper looks at strategic development in E-businesses and tries to answer whether strategic development in internet based companies is unique or if existing theory can still be applied. The predominant approach is to look into if E-businesses, due to a turbulent environment, rely less on market research and focus more on internal resources than would be expected by companies in more stable environments.

This thesis looks at two sides of the same coin: how to support the production and future development at a specialist medical technology department at Danderyd Hospital. The two sides are; a pilot study of a product management system (PDM) and an interview based study on the characteristics of the silent knowledge of the technicians. The department (National respiratory centre, NRC) is facing retirement of several key employees.The technical study shows that the success of an implementation is largely dependent on the users? prior knowledge and use of a 3D Computer aided design system (CAD).The system itself is shown to fulfill the Lifecycle requirement of tracking the products (mostly tracheostomy tubes) but without a CAD centered workflow, some substantial education and preferably some new recruits, an implementation of the PDM system will fail. The author recommends development of the current ?low-tech? system of MS Excel and Access rather than redistribute the dependency from technician towards a complex, commercial software and its vendor.The analysis of the technicians? silent knowledge with the newly developed method, epithet for silent knowledge (ETK), shows that the longer employment time:the more differentiated technicians become in describing their work,practical knowledge are regarded higher andthe social and collective problem solving factors of the work becomes more important.Typically, it is shown that a new employee should preferably enjoy problem solving, being pragmatic and social as well as having some prior education or work experience in a CAD and/or a PDM system..

Detta kandidatarbete undersöker hur narrativa strukturer inom spel fungerar i kombination med varandra, hur dessa kan användas tillsammans och vad som förändras i en spelproduktion. Syftet är att undersöka trippelnarrativ som metod för användande av flera narrativa strukturer i ett och samma spel och att ta reda på hur det kan tillämpas i en spelproduktion. Vi genomförde en undersökande produktion där vi utvecklade en prototyp av ett spel med en trippelnarrativ struktur för att sedan diskutera och resonera kring användandet i spel.

In an ever more competitive environment Sandvik Materials Technology,SMT, runs a large-scale program to improve their processes for product development.The purpose with the program is to increase the company?s profitability by increasingthe number of new products in their product portfolio. The strategies SMT is usingfor reaching their goals are to change the way they work with product development byreducing lead time and learning how to prioritize products with the highestprofitability. In the R & D Department the work of improvement pursue by adaptingLean R & D to their way of working. Lean R & D encourages working withcontinuous improvements and eliminating waste.The main purpose for this Master?s Thesis is to develop didactic support to make iteasier to implement Lean in SMT R & D department.

The mobile revolution is here to stay, and today most people have (at least) one cell phone at home. Some even a PDA (Personal Digital Assistant)as a complement for the simpler tasks at the office, e.g sending e-mail, word processing, browsing the Internet etc. Many business have also given the employees the opportunity to do some of the business tasks inbetweeen customer visits with the help from a cell phone or PDA.Despite all this, the so called Internet connected mobile revolution is often mentioned as a big failure. Maybe because the people in general tended not to use the new technology as much as the companies predicted. This could be because they still haven't learned how it works, or just don't seem to have the need for services provided.After a couple of failures in the development process, almost every cell phone has support for mobile Internet today.

The advancements in digital technology and its availability contribute to the transfer of companycentricproduct development and value creation to networks or communities. It also changes the basisfor creation of customer relationships as described in previous research on Customer relationshipmanagement (CRM). The purpose of this case study was to gain an understanding of how companieslike our case study object Memoto who developed a physical product which gets added-value fromdigital product-related services looks upon product-centered communities as a way of buildingcustomer relationships. How Memoto looks upon incentives for participation in product-centeredcommunities was also examined.Our research indicated that firms in the start-up phase (which Memoto was when this study wasconducted) initially want to have more control over the process of innovation and hence have directcontact with end-customers. The reason for this is because they see a need to define the basis forfurther innovation work.

Skanska 21 is a student program for university students. The program runs for a year and a half parallel to university studies. It is aimed at those studying a few specific master engineering programs at Lund University, Royal Institute of Technology (KTH), Chalmers University of Technology or Luleå University of Technology. The program consists of a number of program meetings such as company presentations, a boarding school week, rhetoric training and project visits. The aim of the project is to evaluate the Skanska 21 student program.

The main purpose of this study is to examine differences and similarities concerning teamwork and interactive skills among preschool children while they interact with an Ipad respective a number of selected traditional artifacts. The traditional artifacts chosen for this study are small Lego blocks, JovoToys (click and construct system) and large puzzles. The study takes its starting point on the basis of both a social- and a learning perspective when different groups of preschool children in the ages from three to five years interact in fellowship groups with respective artifact. Primarily the main focus is to examine differences and similarities that appear from without the social perspective.The overall objective is to identify what eventual differences and similarities can be found purposely on both what is happening in the social interaction between the preschool children themselves but also what is taking place in the interaction between the children and each artifact. This study will also via theoretical frameworks create an understanding why eventual differences and similarities exist.The results are based on both a literature review and a field study.