The purpose of this study was to interview different groups of people (preschool teatcher, parents and theire childen) involved in preschool about their view on outdoor activity and children´s motoric development, and how a preschool yard should be designed to promote childrens development.All parties regard outdoor activity as very important for the development of children. They also think that the outdoor environment today is good but that it could be improved by including some trees and hills. The yard should also contain soil, sand, clay and water. The children prefer grass on the ground over other substrates. This study also gives good indications to decision makers how to build new or to reconstruct pre-school yards in the future..

This bachelor thesis in mechanical engineering was performed during the spring2015 in collaboration with Composite Consulting Group in Laholm. TheComposites Consulting Group works mainly with design and details of differentcomposite projects, their main area is FE-calculations, 3D-modelling andmechanical tests with composite materials.The aim of this bachelor thesis was to simplify the calculation process of solidmechanics for sandwich panels by simulation with computer software. The goalwas to decrease the time for the design and calculation process of the constructionand the cost of the practical tests. Our task was to build a static three dimensionalmodel with the computer software Abaqus, where the result should correspondwith the practical pressure tests in laboratory.The project started with collection of material data from Composites ConsultingGroup and by learning the software Abaqus, simultaneously a specification wasdeveloped in corporation with the company. Later on, a static wheel pressuremodel in the software Abaqus was produced which simulated the behavior of thesandwich panel during static wheel-pressure by a pallet truck.

This master thesis deals with problems in the arc length control in Pulsed MIG/MAG Welding. The main problem is that it is not possible to measure the arc length. In the present solution the voltage over both the electrode and the arc represents the arc length. To improve the arc length control a model of the electrode melting has been built. One output from the model is the voltage over the electrode and with this voltage together with the measured voltage it is possible to calculate the voltage over just the arc.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

The aim of this Masters thesis is to examine librarians attitudes and values when it comes to the question if a new media, video games, should be introduced at the library or not. Video games are here seen as media primarily for youths. In our study we also wanted to study the discussions of quality and purchase, when computer games were introduced at the library. In order to answer our questions we conducted nine interviews with librarians working with children and youths, in eight libraries. By analysing their statements, using Maj Klassons theory where she defines the librarians role in three different strategies, we could demonstrate how the librarians reason when it comes to video and computer games, youths, quality and purchase.

This is a pattern project for textiles, with main purpose to develop and challenge my design process and to experiment with a mix of different printing techniques. The goal of the project was to create three textile individuals as representatives of my experiments, inspired by natural surfaces.The world of fashion have been an inspiration and has been the model for these textiles, with its powerful and playful patterns. With the world of fashion as a model, I also chose to work with the materials habotai silk and silk velvet. The qualities of these materials has also been influential in my design language.The work has been very focused on experiementation and exploration, and resulted in three printed fabrics that I have chosen to call Björkalm, Lindstam and Lavbädd..

This study aims to examine preschool teachers' thoughts about the child libraries functions. The purpose is to highlight preschool children's early read and writing skills, before they even can read and write, which is a theory called emergent literacy.This is made by conducting five qualitative interviews, with the intention to investigate how the preschool teachers think about the cooperation and the function of the child library, partly for their own work with the children and partly for their organization. By using a tablechart which shows each preschool teachers mostly common thoughts in the interview and by using a model based upon Harrysson and Joelsson (2006) model, which shows the functions of the public library in the society. The results of the study are presented in the four categories of the model which are; to borrow, to learn, to ask and to find, to reside. These are functions that the preschool teachers see with the library, for their work with the childrens' early literacy.

This study presents a methodology that enables the annual average power of a wind turbine to be increased by automatically optimizing it?s airfoil, twist and chord dis- tribution. As a part of the study the software SiteOpt has been developed. This software connects the open source software XFOIL with the blade element momen- tum theory. XFOIL gives lift and drag coefficients which enable the blade element momentum theory to predict the power of a wind turbine at different wind and ro- tational speeds.

Aim: Team spirit is a concept often used in both managerial literature and in other contexts where the efficiency of a group is discussed. Despite the fact that team spirit is used as a selling point for courses, books and seminars, no unambiguous definition of the term is available. The purpose of this thesis is to clarify what team spirit means to individuals within companies and team sports. Method: The thesis has been carried out using studies of available literature, which has been compiled into a conceivable model of what team spirit may imply. From this model a poll has been made, and handed out to individuals within companies as well as team sports. After having compiled the 37 replies, correlating answers has been sought after within each group of respondents. Result & Conclusions: The result shows us that there are varying opinions of what team spirit is, and generally accepted definitions of closely related ideas like cohesion and group development has to the respondents not been able to form a satisfying description of what team spirit means.

Bergvik Skog is one of the leading forest companies in Sweden who use airborne laser scanning for forestry information. They utilize laser data retrieved by the Swedish National Land Survey to describe the forest holdings and facilitate planning for thinning and final felling operations. However, the possibility to identify stands with clearing needs by using laser scanning data has not been tested in a large scale. The data used in the current study are field data from The Swedish National Forest Inventory in combination with laser data from the Swedish National Land Survey acquired in 2009. The collected data is used to find one or several laser variables that best describe the relationship of the field measured samples with clearing needs.

Rising complexity in the development of real-time systems has made it crucial to have reusable components and a more flexible way of configuring these components into a coherent system. Aspect-oriented system development (AOSD) is a technique that allows one to put a system?s crosscutting concerns into"modules"that are called aspects. Applying AOSD in real-time and embedded system development one can expect reductions in the complexity of the system design and development. A problem with AOSD in its current form is that it does not support predictability in the time domain.

The purpose of this study was to examine how teachers practice Arne Tragetons theory of using computers as the first writing instrument in reading and writing development. We wanted to clarify how the work from using Tragetons theory was applied while investigating if and how other methods of reading and writing instruction were used. Our interest lays in how the teachers accomplished the knowledge of this theory and also how the choice of this approach came about. To investigate this we used interviews with a qualitative nature, where seven active teachers were interviewed. They worked in three different schools in years one to three, they were all women and had various long experiences of work on the computer writing tools.

Ur ett företagsekonomiskt perspektiv finns det ett stort intresse av att utveckla innovativa tjänster då forskning visar att det skapar hållbara konkurrensfördelar. Fastighetsföretag arbetar med tjänsteutveckling för att fylla sina fastigheter och arbetar tätt ihop med sina kunder där efterfrågan styr utvecklingsprocessen. Föreliggande studie testar Wang & Tsais (2012) tjänsteutvecklingsmodell där metoderna tjänstekartläggning, ?service blueprint? och ?axiomatic design? utgör verktyg för fastighetsföretag. Med dessa metoder ska företaget identifiera kundernas behov och leverera en ny tjänst som uppfyller både interna och externa krav.

The problems with train-induced vibrations are increasing with heavier and faster trains. Therefore the work with propagating vibrations is of outmost importance, and that is what this thesis relates to.To get a sensible idea of the propagation, calculation models are often used. Propagation calculation models takes into account factors such as distance to the railway, the ground material and the velocity and weight of the train. This work is mainly about finding suitable existing models and, if necessary, adjust them to be more useful with modern trains and railways.The report contains the work of adjusting one such model and does, despite the fully functional adjusted model, describe how much more there can be done within this topic. Finally, a few tips about specific areas that preferably should be studied to get even further knowledge about the troublesome problems from railways..

This thesis has been performed at consulting firm Sweco Position in Jönköping. The thesis is divided into two main sections: theoretical and practical. The theoretical section contains an investigation into the possibilities of implementing a geographical information system (GIS) for administrations of wells with the integration of Bing Maps for Windows 8 and Windows Phone 8. The practical work comprises the development of a prototype for Windows 8 and Windows Phone 8.The students review the Model-View-ViewModel-pattern on a theoretical basis, compares the differences between Windows 8 Pro and Windows RT. The thesis also contains and investigation into the pros and cons of a web based application compared to a native one.The result of the thesis will be comprised of a GIS-service developed in C# in co-operation with XAML with the options of saving data locally and a WMS-based service layer for Windows 8 and Windows Phone 8..