In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

In 2014-2015 a large-scale Ebola epidemic occurred in West Africa. The Swedish Civil Contingencies Agency was given the order to conduct the Swedish response. The purpose of this case study was to investigate the impact on project planning of the three factors: the nature of the crisis, political initiative and developing countries. In this case study the crisis was an epidemic, and the project was initiated by the Swedish Government and conducted in two developing countries. The results were intended to contribute to developed understanding and recommendations for future project managers in similar projects.

This project is a step towards automatic firefighting. The goal is to decrease the number of personal injuries by replacing the human firefighter with robots or similar technical tools. Especially in very hostile environments due to risk of explosions or building collapse. A robot is easy to replace and can be maneuvered from a safe distance. The idea of the project comes from the company Drones Networking which aims for developing a totally autonomous firefighting system.

Nowadays, a lot of resources are spent on developing systems that will make it possible forvehicles to act autonomously, and make them more effective. One of the projects that isworking on this is the Gulliver Project. Gulliver has constructed a number of miniaturevehicles equipped with various sensors, to use as a physical testbed for autonomousdriving. One big disadvantage with this method is the long iteration time that occursduring the development and testing of a new software.This project has improved this process by developing a system architecture of a virtualtestbed where it is possible to simulate autonomus vehicles that communicates throughany type of wireless network. The testbed has made it possible to simulate autonomusvehicle systems that with a reasonable margin of error, acts like the system would actin a physical test.

Project management has been a very popular way of conducting information system development in the past years. Among all major information system developing companies today, almost everyone work in some form of project management. Our objective with this study has been to find out if there are any problems that begin in the early part of the project. Problems that, if they aren?t solved directly, can become bigger problems later on in the project.

This thesis describes the universalization, improvement and further development of acompact crane support frame for flatbed trucks. The work has been conducted at Eloch Fordonsteknik AB (henceforth EFAB) in Uppsala.The aim of the work has been to shorten the assembly time of the product. By doingso, the product can be kept on shelf, which in turn results in shorter lead time. Thishas been done by universalizing the support frame to be compatible with most of thechassis EFAB works with. Additionally, the entire construction has been made lighter,which will make it a more attractive choice for customers.A pre-study was conducted and information was gathered internally, as well asexternally, in order to ascertain that no limitation or possibility was overlookedduring the course of the project.One such limitation has been the geometry of the truck bed that the support frameshall be compatible with.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

The project involves implementing a finished dispersion model into ArcGIS. The goal of the tool is to show how dangerous and toxic substances will travel in the ground after long periods. The goal of the project is to understand GIS in general, what it is used for and gain an insight into how developing tools for ArcGIS is, what challenges might exists. Understanding the type of data that can be stored and accessed in ArcGIS a long with the tools and functionality offered by the system when using Python as the main language for development. A prototype of the tool is created..

In 2011, I and fellow student at Gotland University created a multimedia game. To fit the time constraints a ?vertical slice? was created. This means a small sample of the game is taken which allows the user to understand how the game works, and at the same time, get a visual demonstration of how the game is designed. The goal of the project was to create a narrative for stadium games in which the backstory is told as players interact with their surroundings.

In recent years seemingly everything has become digital. Some areas, like classical sports, have been slower to adapt to new technical development. Golf is an example of this. Usually when people play golf they bring their clubs, golf balls and a paper scorecard on to the golf course. The advantages of keeping score in a digital way areevident.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.

HemoCue AB is a multinational corporation targeted on manufacturing point-of-care analysisinstruments for medical treatment. Their main product, the DM 201, is outdated and has bigissues gaining new market shares. For example, no medical treatment center in Sweden usesDM 201 frequently. The project of developing a new instrument to replace it was assignedtwo students at the development engineering program at Halmstad University. The projectalso included integration of the new platform for DM 202 to HemoCue AB:s remainingproducts.The project began by defining the different technical areas concerned.

The Uppsala based company Q-linea develops procedures, instruments and systems for protein and nucleic acid analysis. The components in such an instrument are controlled by microcontrollers. Microcontrollers are computers in one singular chip that can be used in a wide range of applications such as cars, toys or in this case an analysis instrument. When developing a new instrument for biochemical analysis, Q-linea needed new software for controlling and communicating between the components in the instrument. The process of developing this software is the subject of this thesis.The project included research of microcontrollers and the components in the instrument.

In this report the two authors, and project contributors alike, describe their work withdeveloping a solar cooker intended for usage in the developing countries of the world.Specifically, the work aims at developing a new, solar heat driven cooking device, possiblybased upon the current product. This should, in comparison to the current product, be lighter,easier to transport and to produce. Also, the new product?s production mustn?t be more costlythan today and the included materials and components must be obtainable from within theBolivian national borders where the product is currently produced. During the project, certainadvantages with a more efficient, and, above all, a more moderately priced product, werediscovered.

The purpose of this work is to develop and test a design process where quick decisions and model building has a prominent role. The goal is to develop a number of products and build prototypes to be shown during the Carl Malmsten Furniture Studies spring exhibition 2012. I?m also writing a report describing my work.To reach my goal I have each day during the first phase conducted a short research and found a concept based on that days name day. Then I have continued in the workshop and worked with three-dimensional models.