The purpose of this paper is to bring a British mural painting that originated in England in the 1920?s into the limelight and introduce it to the Swedish public. The mural was commissioned by Tate Gallery, currently known as Tate Britain. The work of art was designed for a semi-public space as a decoration in the Refreshment Room of the gallery, located in the basement where there was little natural light. The artist, a young British man named Rex Whistler, was transformed from being a student at an art school into a celebrated professional artist by this piece of art.

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

The purpose of this study was to interview different groups of people (preschool teatcher, parents and theire childen) involved in preschool about their view on outdoor activity and children´s motoric development, and how a preschool yard should be designed to promote childrens development.All parties regard outdoor activity as very important for the development of children. They also think that the outdoor environment today is good but that it could be improved by including some trees and hills. The yard should also contain soil, sand, clay and water. The children prefer grass on the ground over other substrates. This study also gives good indications to decision makers how to build new or to reconstruct pre-school yards in the future..

This thesis examines underpricing and the long run performance of IPO firms on the Swedish equity market during 1994-2010. We further investigate whether any correlation exist between underpricing and post-IPO performance during 36 months. We use a sample of 80 IPO firms. To examine the aftermarket performance we compare total return of each firm with a matching industry index. In order to strengthen our analysis, we run a second test, comparing actual return for each firm with expected return, adjusted for firm specific risk.

In early January 2010 the authors participated in a meeting with the chief engineer for a company in which a central part is manufacturing of printed circuit boards (PCB). At this meeting it emerged that the machinery and production methods have changed substantially since the early 1990's. The spreadsheet for preliminary production time calculations by the company is today based on conditions from almost 20 years ago. The company has over the years been trying to adjust the spreadsheet template. The result of these adjustments has filled it with historical residue, something which makes the template difficult and time consuming when the primary user tries to handle it.The purpose of this study was to help the company increase its accuracy in the representation of the production times for the different PCB-based products by developing a new costing model based on an already existing but inadequate spreadsheet template. The company also expressed the wish that the new costing model would be less time consuming to work with.The methods used to achieve the goal are interviewing, participatory observations and meetings with relevant persons. The data obtained were analyzed using the theory on PCB production and visualization of data.

The aim of this thesis was to investigate the possibility of integrating an item tracking systemwith a monitoring system currently under development at Fifth Generation Technologies (P) Ltd.A literature study of RFID technology and the networks ZigBee and MiWi was done. Based onthe literature study a concept for a distributed system was developed.The concept is to have several RFID readers placed in the area where tracking is to be performedand allow them to communicate with each other through wireless communication. The RFIDreaders shall be able to form zones and filter the data that is forwarded from the zones to theservers and thus perform some of the work that the server would normally have to do. Theconcept has been evaluated by prototype development and testing. The prototype uses an ultrahigh frequency RFID reader and a MiWi network.The test indicated some limitations with the selected technologies.

Background: Associated with the change in the regulations in 2009 concerning how goodwill should be handled in the acquisitions, brand valuation is increasingly recognized. Goodwill will now be identified and the brand will therefore be separated to be individually evaluated. The valuation has a problem with a number of factors that will influence the choice of method, to obtain a reliable value Aim: The purpose of this study is to examine the method used for brand valuation associated with the acquisition situations. In addition, it aims to gain a better understanding of brand valuation and its problems.Method: The study has a qualitative basis, where three key people of brand valuation have been interviewed. These work as valuation specialists at various accounting firms, this to get answers that could be compared.

Sitka spruce (Picea sitchensis) is a tree species that have its natural distribution along the West Coast of North America, from Alaska in the north to northern California in the south. Sitka spruce is a typical coastal tree species that can reach heights up to 85 meters and occurs in single pure as well as in mixed stands. The main purposes of this study were to describe the Sitka spruce growing characteristics and the volume production in comparison to spruce (Picea abies). The possibility to predict future volume production by using prognosis tools designed to be used on spruce were also studied. The material that has been used in this study are permanent sitka trials established by the Faculty of Forestry fixed Sitka trials and also material gathered in this study. A literature study was also carried out in order to determine the Sitka spruce growing characteristics. Sitka spruce has a high adaptation and a high volume production on a broad scale of soil types. The tree species is a pioneer species that has a fast early growth and in combination with sharp needles it is less susceptible to animal browsing than spruce. The factor that is the single most limiting factor for where the Sitka spruce can be planted is frost. This factor can be limited by using plant material with a well-suited provenance. According to the literature, the Sitka spruce has an average total volume production that is between 20-40% higher than spruce.

Background: Commerce over the Internet has exploded in recent years. For many companies it has become a necessity to offer their products overthe Internet. This new market ought to change the conditions for relations between customers and suppliers. Purpose: Our aim is to describe and analyse the factors that influence the relations between customers and suppliers, from a customer view, when commerce is conducted over the Internet.Delimitations: The study is limited to B2B commerce with IT-products. Methodology: The thesis is based on a study of the company IMS, their e-commerce site and organisations that buy IT-products over the Internet.Conclusion: Internet opens up new possibilities for custom designed offers.

Syftet med denna uppsats är att undersöka och kartlägga begreppet kreativ redovisning. Vi har antagit ett utifrånperspektiv vilket innebär att vi objektivt granskar och analyserar uppfattningar kring begreppet kreativ redovisning. Vår ansats är kvalitativ och våra metoder består av en litteraturstudie och i intervjuer. Vår slutsats är att det inte finns en entydig uppfattning av begreppet kreativ redovisning. Det är ett komplicerat begrepp och uppfattningen om den styrs av flera olika faktorer.

This report presents a thesis project conducted by two students at Mälardalens högskola. The project covers 15 points in industrial design and was conducted during April to June 2014. The principal of the thesis works at Plastic Produkter. The assignment was to develop equipment for an effective way to dose, mix silicon, fill a special designed plastic bag and then seal it. The bag is then formed into a breast model.When a customer for various reasons decides to do a breast augmentation or a breast reconstruction, there may be doubt or uncertainty about the result.

In offshore oil production FMC Subsea systems use a product called cap. The cap´s mainly task is to protect hubface and seal areas on inboard hub against dirt, corrosion and mechanical damage under installation of a subsea system. A new model of a cap has been designed and analysed using finite element method. The model is called KC3-12 and has a new function, emergency release, which is a backup method for the ROV (remote operated vehicle) to release the cap from the hubface when it is placed under water. The cap KC3-12 was found to fulfil the criteria under the test load pressure, according to ASME VIII, div2.

This master?s thesis report is a summary of the analysis performed together with ITAB Shop Concept located in Jönköping, Sweden. As a last element of the Master?s program at the School of Engineering, this 20 point level D thesis project has been the final work to bring my education to an end.ITAB Shop Concept expressed an aspiration that the Shop Counter Program B10/B11 should undergo an analysis to point out and possibly lead to improvement.Through interviews and data collection proposals for possible improvements has been drawn up and the analysis points out current deficiencies. By following the idea generation, proposals to solutions for every individual problem is presented.

Earlier research has shown the difficulty of defining insulting behaviour in the workplace. It has been noted that the individual and subjective definition is connected to the specific situation in which the potentially insulting incidence occurred. In this study we designed a quantitative questionnaire in order to hopefully elucidate the comprehension of insulting behaviour and furthermore enable a more in-depth investigation on how important the contextual meaning is. This study examined 140 (n=140) working adult?s attitudes towards insulting behaviour in the workplace and the importance of the contextual variables.

The advantage and the possibility of keeping track of a number of vehicles to make work practice more effective and smooth is today a favorable choice for Visual Units Logistics customers. We?ve been evaluating the software and trying to take it one step further and letting not only the individual user, but maybe, the company as a whole benefit from its advantages. This has been done by using methods like letting ourselves get to know the software, user case studies, workplace studies, interviews and future workshops. This resulted in a prototype introducing a new function designed with all collected data in mind trying to make the software, Visual Units Logistics, even more effective for the every day work practice of the user.