Transcending sound design is possible. There are unseen possibilities and a great potential for improvement and development in sound and music design ? but there is a great difficulty penetrating the obstacles that lies in the way for such development to take place and to exist. The difficulties in being negotiable and productive lies more within the limits of the audience it has to gain, than in itself. It is as though music and sound design has to evolve very slowly, in an almost evolutionary style; one step at a time, to be accepted.

The dialysis ward at Karolinska University Hospital is a highly pressurized work environment filled with critical treatment situations where patient?s lives can be constantly in danger. Staff have to deal with a myriad of alarms and error codes in response to their patients varying ailments. The workforce at the dialysis ward lack controlled environment training, sufficient to address all of the potential treatment scenarios, with no risk of jeopardizing the patient?s condition.The purpose of this essay is to design and test the efficacy of using an IT based device for dialysis education at Karolinska University Hospital.The main topics this essay intends to address are:? Identification of user scenarios and training fields.? Prioritization of key training areas.? Utilization of IT in effective staff training.? Design of a conceptual prototype.The process focuses on the user and their needs.

The purpose of this report is to simplify the process of designing carbon fiber strengthening for existing concrete constructions, specifically beams. The intention has been to establish a flow chart containing information on the necessary testing and calculations for the design, to as far degree it is possible satisfy the requirements stipulated by Swedish and by extension, European authorities.To do this the report will examine a parking garage situated underground by Akademiska Sjukhuset, Uppsala. The parking garage was built in the mid-seventies, and has in recent years been subjected to a greater load than designed for by the construction of a road on top of it. FEM-Design has been used to obtain the internalforces of the beams and thereby determine whether they are in need of strengthening or not and thereafter design the strengthening according to Täljsten (2006) with some corrections from Täljsten (2011) due to new regulations.The result of this report is that the flow chart used is viable to design carbon fiber strengthening, atleast with the conditions met in our reference project.The conclusion drawn after working with this report is that there is a need for a clear standard for carbon fiber strengthening , preferably a standard that can be used throughout Europe..

Companys usually have intern communication platforms where employees can gather information and communicate with eachother. These networks are not public which leads to less resources spent on development. If this network is also used as a work tool may inadequate usability decrease work effeciency. Thats why we, by using known design principles, evaluated an already existing network of this kind along with interviews and think out loud tasks for users. Four users had to do some tasks while they explained how they went through step by step to solve those. This report culminates into a couple of guidelines which can be used to create a user friendly network. The problems that prevented users to feel in control when working resulted in the following guidelines: Create shortcuts of frequently used functions.

AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.

Old industrial sites bear witness of the unsustainable industrial developments in the past. Today many of them stand abandoned and empty, old structures lacking function in our present society. We have in this thesis participated in a visionary student competition arranged by IFLA, International Federation of Landscape Architecture by developing a proposal based on a vision of how Stockholm can stimulate a greener development. We have done this by turning an unsustainable industrial site in the city into an ecological node; Arboretum Lövholmen. Our aim is to develop an entry for IFLA?s visionary student competition by creating a new sustainable design for the industrial area of Lövholmen in Stockholm. We have worked with the following research questions: How can we create a visionary design proposal for Lövholmen that promotes sustainable development with the help of ecological design? How can the competition format be a design tool? How can the working process developing a competition entry progress? The competition demands have shaped our working process and functioned as a platform for the structure of this thesis.

Design Thinking är ett spännande och fortfarande relativt outforskat område med rötter i Service Management. Med hjälp av designerns verktyg och metoder och en mångvetenskaplig grund med fokus på kundens behov kan Design Thinking bidra till att utveckla produkter och tjänster och genom detta öka lönsamheten för företag. Syftet är att göra en deskriptiv studie av området Design Thinking som metodiskt arbetssätt vid tjänsteutveckling. Detta appliceras sedan på verkligheten för att komparativt se hur tre svenska bolag arbetar med tjänstutveckling inom en av världens största tjänstebranscher utifrån områdena Service Management och Design Thinking. Uppsatsen beskriver utvecklingen från Service Management till Design Thinking och hur man har gått från att utveckla tjänster till att designa tjänster.

This report covers the conceptual design of a new one person hybrid vehicle that is to be fast and convenient to drive on the roads. The vehicle is most of all supposed to be used as a commute vehicle but can also be used at other occasions as well.During the work with this project the group has focused on three larger areas, the outer design (body), wheel chassis and an ergonomically designed interior. The group was not able to just create these parts in 3D to get a trustworthy vehicle, hence number of other components and details were also created to get a better entirety.The outer design starts with idea generation and sketches and ends with a 3D model which is rendered to show how the final product is going to look. The design of the body has been going on during the entire work process due to new ideas and improvements that seemed interesting and had to be changed.The wheel chassis also started with idea generation, research and sketches. It ended up with a simulated 3D model which later on was mounted on the vehicle body to show how the vehicle is going to perform during usage.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

Spatial design for children nine to twelve years old at the Halmstad City Library. An investigation about the specific needs of the target group and how the child department can be designed to stimulate their experience of visiting the library. The aim was to create a spatial concept from the children?s ideas that inspires to playfulness and lust to read at the library. A more personal goal was to collaborate with an external part to prepare for my future role as a designer within child culture.

An increasing amount of companies and organizations are starting to implement the use of cloud computing in their business. This trend results in that software, which was previously sold and distributed to the customers whom then had to install the software on their own computers, now is being replaced with Software as a Service (SaaS). SaaS makes software available through the customers? browsers, which results in that the service providers only have to administer a single application. The process to migrate a distributed application to a service delivered as a SaaS lacks sufficient investigation; this paper will provide some guidelines for conducting such a pro- cess.

The residential yard at Kvarteret Landsfiskalen 1, in the area Herrgården in Rosengård, Malmö was built in 1971 and has since then been reconstructed twice, in 1984 and 2008. The yard is found in an area which was built during the years 1965 ? 1974, a period in which the swedish goverment approved a decision to build one million homes, and much of the events in this particular yard is also typical for the process in many other areas built during the same period.At the original construction the design of the yard was entirely incused by the pressure in time and finance, one was under at that time, in order to over- come the housing shortage. The design it has nevertheless been given, reflects the esthetic ideals of that time well.The building of the area was barely finished when the swedish authori- ties started handing out grants in order to support the rearmament of the outdoor environment in the areas built during the so called ?million program?.

AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.

With this essay we want to describe the transformation process that the real estate owner has to go through to sell the current rented flats to tenant. We also want to provide an understanding how the valuation is performed in the transformation process and highlight the issues that affects the price in the valuations. In the essay we would like to see if the valuation and the transformation process differ in a public real estate company compared to a private real estate company. Based on this we have asked us the following question to answer: -Is there any differences in how real estate?s are valued in the transformation process between public real estate companies and private real estate companies? We have used a qualitative approach to keep our main question.

In which ways have composing processes in music appeared over the past 300 years? How may composing processes work today? What does new technology do to this processes?The key purpose of this study is to investigate various composing processes. A further purpose is also to gain an awareness of how we use modern technology by computers and their notation programmes.The research design of this thesis includes a display of literature related to composing processes. along with an analysis of the writer?s own experiences in the area.