If Swedish companies are to compete with companies in low-cost countries they have to achieve a more efficient production. The purpose of Total Productivity Maintenance (TPM) is to increase the company's profitability by increasing the productivity. TPM is a method that involves all employees and aims to prevent failures in order to increase the availability of existing equipment.The aim of this paper is to evaluate the implementation process of TPM and give recommendations for the further implementation process. The conclusion and the analysis are based on a case study done at a production department at ABB Cewe-Controls facilities in Nyköping. The case study consists mainly of qualitative data from participation observations, surveys and interviews.Commitment of the management is a key factor in the implementation process of TPM.

The use of mobile devices has during the last years expanded and on the market you can see a huge amount of applications. The development of mobile applications differs from traditional systems development since mobility infers that mobile applications can be used in different technological and social contexts. Although previous research has recognized that mobility can present mobile application developers with certain challenges, empirical studies of how problems arise and how they can be handled has thus far been limited. In this study we focused on the requirements engineering process from a development view with the purpose of finding challenges emerging in the development process. The study is based on a qualitative case study that employed semi-structured interviews with both project managers and system developers active in the requirements process.

Denna rapport beskriver processen av skapandet av en webbaserad säljpresentation av en av företaget PROSK8?s planerade produkter. Målet med presentationen är att skapa nyfikenhet och förtroende genom visuell design och ska fungera som ett verktyg och stöd för företagets presentatörer vid möten med investerare. Centralt för denna process är upplevelsedesign, varför utgångspunkten för arbetsflödet bygger på Jesse James Garretts modell av ?The elements of user experience?.

This is a study of how emotional engagement can be measured and be taken into account in the development of websites. We believe that emotions become relevant only when viewed in correlation to how users experiencing a webpage. In this study, we developed a tool for use together with user tests where the information about the user's emotional engagement can add new value to the evaluation. The tool allows the user to mark, on the website, his/her emotions and level of engagement represented by colored circles, generating quantiative data on how users feel about the website. The tool is part of a method for evaluating the emotional engagement that we have developed which consists of user testing supported by the tool and accompanied by interviews..

Currently many organizations are transitioning from the traditional approach to the agile approach regarding systems development methods. It is evident that research has mainly focused on smaller organizations transitioning, whilst less focus has been given t0 larger organizations. We find this interesting and the purpose of this study is to gain a deeper and broader knowledge concerning the following research question: How is system development work affected by a change from traditional system development methods to Scrum in large global organizations. We also investigate how Scrum can be adapted to complex projects with an internal client. The study is based on a case study, which takes a qualitative approach with semi-structured interviews for information gathering and was conducted on a major Swedish telecom company.

This report is the outcome of an exam work made in interaction design, bachelor degree, at the School of Arts and Communication, Malmö University. Working in collaboration with the childhood obesity unit, Region Skåne, our aim was to fulfill their request of a web based application preparing the children for treatment at their facility. Furthermore the application intends to give the children knowledge concerning obesity as well as teaching them how to obtain a healthier lifestyle in terms of provision and activities. The application concerns children in different ages and therefore different stages of their learning abilities. Our conclusions are that they need to be challenged and obtain feedback in different ways to get motivated.

The development of IT systems is usually accomplished by some form of system development methodology. It can be performed as the waterfall method, where each phase is completed before the next begins. One of the reasons to follow a development methodology is that the process is more structured, faster and that the product will have higher quality. One risk of not using a system development approach is that the code can be unstructured and difficult to maintain.This paper describes an alternative method in which the development occurred without the use of any system development methodology. This has been possible because there was a clear goal of the program that should be developed.

The company Sound Precision has developed a new Line Array loudspeaker system (VHA-40). When using this system, their customers need computer aid to get the best possible sound-quality and control of sound levels for the whole audience. The aim of this thesis is to develop a truly useful sound quality simulator for the VHA-40. The system will help the sound engineers to position the loudspeakers for optimal sound by simulating loudspeaker configurations and visualizing the resulting sound quality and quantity. To solve this a human-centered design (HCD) approach is taken to implement a system that is truly useful for the users, meaning that they will use it more and hence deliver better sound for the audience.

Sweden introduced a development assistance policy in 1952 and thirteen years later Sida, Swedish International Development Cooperation Agency started, in 1965. But in 1995, five separate development assistance authorities came together and established the new Sida as it is today. Sida is Sweden?s representative in the development assistance policy field and they work through projects that have to be presented through a Country Strategy Process (CSP). The aim of this paper is to point out Sida?s perspective on the conducted development assistance policy and what guide lines that are followed.

The report presents a thesis carried out on behalf of the company SAAB Training and Simulation which is situated in Huskvarna. The authors of this report are going to graduate as mechanical engineers focusing on product development and design, and this thesis should reflect the knowledge obtained during the education. The assignment, given from the company was to develop a concept of a stand that will constitute as a part of a mobile system for target practice. The reader get to follow throughout the project and can hopefully learn from the smart solutions and approaches that have arisen during the process.Today SAAB doesn?t have a mobile application in their portfolio that utilizes the benefits of their sensor measuring system, also called the LOMAH-bar.

Spotify is a music service that offers on-demand streaming and is available in several countries worldwide. As the company and the interest for it grows, more and more parties are involved and those involved, including the record labels want to control and get an overview of their products. They want to be able to see, for example, when a product is available on Spotify and in which countries.Spotify is in May 2013 in process of developing a to be used by administrators on Spotify in order to meet the record labels with the information requested. The new software intends being used by administrators but also by the record labels so that they will be able to overview their products availability.We were asked by one of the developers to conduct user interviews and tests to result in a design proposal on how the display page of information about a product could be visualized more clearly so that it suits both record labels and employees at Spotify. The results of our contextual interviews were translated into a prototype with two display pages.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

This is the end report of my final exam at Medieteknik. It covers the planning, work process and review of a Flash based web application that I set out to do. The goal was to create a user friendly, interactive e-shop with embedded functionality for playing music, displaying rich media content and researching possible payment solutions, to enable buying music files online. The project involved creating the user interface, the programmatic functionality of a Flash client (an SWF file). Also, setting up an Apache HTTP Server and establishing a working ?bridge? between the Flash client and the web server with Flash Remoting components and AMFPHP.

The overall goal of this diploma work is to produce a design of a 5 GHz radio frontend using Agilent Advanced Design System (ADS) and then build a working prototype. Using this prototype to determine if RF circuits at 5 GHz can be successfully produced using distributed components on a laminate substrate. The design process for the radio front-end consists of two stages. In the first stage the distributed components are designed and simulated, and in the second stage all components are merged into a PCB. This PCB is then manufactured and assembled.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.