This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

ABORT ?n GO is a design project within the crossing boundaries of Critical Design and IndustrialDesign.The contemporary discourse on abortion is problematic, and infected by double norms. Thesenorms may cause feelings of guilt and shame in women who have an abortion. The abortion rightis built upon conflicting standpoints; one is that women have right to have an abortion, withoutbeing questioned. Second is the notion that abortion is something that should be avoided, implyingthat you?ve done something wrong if you have had an abortion.With this project and physical product I want to explore and discuss the contemporary discourseon abortion in Sweden.

This is a report on the development and implementation of the web shop ?Urballa Ur?, a web application developed by nine students at Linköping university. The report illustrates the methodology and process with intention to answer the question ?How can an online watch store be implemented to increase sales??. During the process the agile method scrum has been used as a working method.

This thesis describes the development of a tank insert for diesel cars, from idea to a prototype. The idea is to design an insert which makes it impossible to refuel petrol in a diesel car. The insert shall be installed in the existing tank opening on diesel cars. The tank insert is designed for the Swedish company SverigeGrepen AB located in Vänge, just outside Uppsala. Their main product is a pitchfork that is ergonomically designed and durable.A pre-study were performed in which information relating to fuel caps, tank openings, petrol- and diesel nozzles were collected.

Background: The request for the Reggio Emilia practice has expanded enormously the last couple of years within the Swedish preschools. This particular practice describes the environment as a third educator. This third educator is supposed to work as - not only a tool - but also a support to ease children's learning experiences and help develop their mind. Previous research has shown that design of, for instance, furniture has a way of affecting the children's learning process and development.Aims: The purpose of this study is to see how two different teams of preschool educators on two differed Reggio Emilia inspired preschools work and handle the physical indoor environment. Method: We started out by contacting Reggio Emilia inspired preschools.

This report describes the bachelor degree project called ?A case study in strategic product design in collaboration with Elfa? carried out by Mathieu Gustafsson and Pär Rickberg,students at Carl Malmsten Furniture Studies.We had the opportunity to do our degree project in collaboration with ELFA after a previous school project where we made suggestions for new products. Initially the brief was to develop new products for the company which was based on previous proposals.Reasoning led us in to design strategies and how to use such a strategy to develop newproducts for ELFA. During our first superficial analysis of ELFA and its current products, we found that we wanted to recast the framework of identity and context in which the product would be created. According to the researches made by SVID (The Swedish Industrial Design Foundation),companies that continually are working with design strategies strengthens the brand, its competitiveness and become more innovative.

The thesis in product development ? mechanical design includes 15 credits and was carried out during the spring of 2014 at Semcon in Eskilstuna. The task is to construct a special machine for positioning and orientation of a key blank found in six different shapes, the construction is a part of a larger machine for encoding the key blank where a pick- and-place device or robot pick up the key blank and deliver it further in the process. The entire construction is designed for ASSA OEM Gothenburg.In order to accomplish the project the first step was to analyze the existing solutions to similar problems on the market in a current situation analysis to create an understanding of the problem. This was followed by a flow analysis and a functional analysis to get a deeper understanding of the problem and structuring the machine's process flow and its features.

This report is a bachelor thesis work in the field of product development and design. The assignment has been to develop a solution for roof racks, normally used for cars, to fit on the open trailer models FS1425 and Alugance. The project was implemented by Johan Andersson and Victor Karlsson, students at the Mechanical Engineering program with a focus on product development and design at Jo?nko?ping?s school of Engineering, in spring 2012.The client wants to use transport solutions in the same way as roof racks on cars. The user of such a product is assumed to desire simplicity, safety and an attractive design with an appealing price, which has been a challenge during the thesis work.Pre-studies have been conducted to examine the potential competitors and gain knowledge in the research area.

This report considers how the design and planning of the city can influence and promote a sustainable development focused on the social dimension. My prior intention was to look in to how a landscape architect can work with social matters of sustainability such as integration, equality, safety and so on. Which are our most successful tools and capabilities? I started to work with the historical background in September 2008 and soon discovered the multitude of theories and definitions of sustainable development, international, national and local. In Sweden the local political level has been given a lot of responsibilities to achieve a more sustainable society.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

This report presents the preliminary study and work for the development of a site structure for the upcoming reengineering of inter-tool Infopunkt. The report describes how I have conducted a study regarding the current inter-tool information center and its development potential. Thereafter compiling the information to develop a comprehensive design approach to create a sitemap. The sitemap illustrates a new updated page structure for Infopunkt and was the primary goal of the thesis. The sitemap I have developed will form the basis for the agency that will later on develop the new updated version of Infopunkt..

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

This report shows the process of the development of a sensor module for the seed drills of Väderstad Verken AB. The module is supposed to replace existing solutions, provided that it is better from both a constructional- and an economical aspect. The purpose of the sensor is to continuously give the driver information about the level of height of the front- and drilling tools and the main purpose of the sensor is to allow the seeds to be placed at the desired depth. The sensors which have been taken into consideration have all been of an analogue type and have a protection class of minimum IP67.The methods applied have been taken from the book ?The Mechanical Design Process? by David G.

Scania InfoMate develops web applications that support truck distributors and workshops with the necessary tools for an effective maintenance process. However, the end-users of these applications are faced with as many different graphical interfaces as there are applications. As a consequence, important effects of recognition are lost, developers spend unnecessary time designing new solutions for each application and Scania InfoMate does not present a homogeneous brand image towards its customers.Therefore the aim of this study is to give a suggestion of how a standardized graphical interface for web applications at Scania InfoMate should be designed. The given suggestion should come from thorough investigation of both end-user needs and recent research within the area of usability. In addition to a standardized interface this study also aims to deliver guidelines that support future web application development at Scania InfoMate.Through a combination of methods, mainly heuristic evaluation and user interviews, an elaborate description of usability and consistency problems in a defined web application portfolio is produced.

The Sister Kenny Research Center is part of the Sister Kenny Rehabilitation Institute locatedat the Abbott Northwestern hospital in Minneapolis, USA. The Sister Kenny RehabilitationInstitute provides rehabilitative services, treating more than 70,000 patients a year.The Sister Kenny Research Center strives to optimize the service to patients by nurturingnew innovations in rehabilitation care and treatment. Research projects are conducted ininterdisciplinary so-called Clinical Innovation Teams. As the Sister Kenny Research Center isrecently started, it did not prior to this thesis project have a design process or structured way ofworking in design projects.The outcome of this thesis project is a comprehensive innovation strategy package with a set oftools to enhance the innovativeness at the Sister Kenny Research Center. The strategy packageconsists of three interlinked parts:?A design process adapted to the work environment at the Sister Kenny Research Centerensuring projects are conducted in a structured and innovative manner.?An Innovation Handbook describing the design process to the Clinical Innovation Teamsand providing step-by-step guidance to designing.