This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

In the history of scientific visualization techniques there is a lack of social science practices and methodologies. The advent of modern computer graphics brought the use of visualizations into a whole new era, but even though the tools by which such modern visualizations are created become easier to access and use, the lack of social science researchers harvesting the benefits of such tools still remain. This ease of use, increase in power and accessibility plus the ever growing need within the natural sciences to augment the human senses has further complicated the relationship between scientific methodologies, validity, reliability and the use of visualization techniques. This relationship must be explored, demystified and understood in order to fully grasp the impact of visualization practices when incorporated into any given scientific method. Within the social sciences there is one example of a tradition that has since its conception carried within it a graphical notion and a visualization practice.

AbstractThis master thesis was performed at Scania transmission department in Södertälje, where the manufacturing of gears is done. Today a large amount of manual handling is performed between the machining and the hardening process. Most of the manual handling is done at the heat treatment department. The purpose of this master thesis is to give a suggestion on how to reduce or eliminate the manual handling at the heat treatment department. The possibility to use the same packaging throughout the processes will also be investigated.

Syftet med denna studie var att identifiera problem och behov som byggare i Sverige stöter på i sin vardag samt anordna en workshop där produktutveckling utifrån dessa behov diskuteras, samt hur denna information kan användas i produktutvecklingen. Studien grundar sig i teorier om innovation, behov och kvalitet, behovsidentifiering, innovationsspridning, produktlivscykel och metoden NABC: Need, Approach, Benefit, Competition. Grunden till arbetet är en föreställning att produktanvändare har behov som dem själva inte är medveten om. Genom att utgå från dessa omedvetna behov kan en bättre produkt utformas. Empatisk design (deltagande observation) användes för att kunna upptäcka outtalade behov samt skapa en god förståelse för byggarnas naturliga arbetsmiljö.

Ljudet a?r ett intressant kommunikationsmedium som utnyttjar varje individsegna erfarenheter och fo?resta?llningar da?r associationer fa?r stort utrymme. Mu-seer som idag kan va?lja fra?n ett stort urval av medier har mycket att vinna ge-nom att anva?nda sig av ljud - inte enbart fo?r att tekniken tilla?ter det.Den ha?r uppsatsen har fo?r avsikt att underso?ka ljudets mo?jligheter som kom-munikationsmedium i utsta?llningar. Syftet a?r att sprida ljus o?ver detta fo?rha?l-landevis outforskade omra?de som jag anser har ma?nga outnyttjade mo?jligheter.Fo?r att avgra?nsa min underso?kning har jag valt att studera utsta?llningen Dro?m-mens syster som finns pa? Va?rldskulturmuseet i Go?teborg.

The purpose of this master thesis is to present a model that illuminates the important factors when deriving technical information from market data within a company. For companies to be able to become and stay competitive in the market, product quality is an important factor. Whilst good product quality leads to customer satisfaction and loyalty, lack of quality brings costs in service and replacements. To improve product quality, the developers need information and knowledge about what quality issues affect existing products. Most companies gather data from market about known issues, but in order eliminate known quality issues in new products; this data has to be transformed into information and knowledge.

Technical products are becoming more and more complex, this means that the drivers, mechanics and service personnel?s need for assistance such as the service literature is increasing. In this degree project the focus is on the technical manuals of Scania?s Workshop Manual. Today, the information in the Workshop Manual consists of collaboration between text and illustrations.

This paper is a thorough review of my internship, during which I designed infographics at Grafiskt Center, SVT, Stockholm. The purpose has been to find out what guidelines and policies SVT has regarding infographics while producing infographics in a professional environment. In addition, I present the daily routine at SVT and the tools used during the work process. Furthermore, the paper contains a reflection of my work effort during the internship as well as thoughts on how I adjusted to the guidelines in question. Finally, the essay treats some examples of infographics which I produced during my time at SVT..

Websites today only offer simpler form of technical analysis and are not fun to use, therefore student decided to build a website that makes technical analysis a bit more fun by giving user possibility to experiment with settings for technical indicators and also see clear visible results from analysis. Student decided to build website in ASP.NET. Technical indicators for this project only consist of those who give buy and sell-signals via cross-over, no divergence or pattern finding.This project has three questions that define this project. It?s important that there is good functionality so that performing an analysis is perceived as simple, one question is therefore; what functionality for website is needed in order for analysis to be perceived as more simple?Technical analysis is a pretty complex subject and demands an interface that is perceived as easy to understand and easy to use, it?s therefore important that the interface is well designed, second question is therefore; how should the interface be designed to be user-friendly?When systems grow large they often become hard to develop and later on unmaintainable because of the accumulated complexity and dependency between classes, the code is a mess, the last question is therefore; how can the systems complexity be eased with object-oriented design principles?Jakob Nielsens ten heuristics for User Interface Design were used as inspiration for designing the interface for the website.

Jag har i mitt examensarbete jobbat med framtagningen av en vattenflaska för en hållbar utveckling. En vattenflaska där användningsområdet är för vardagligt bruk. Arbetet har en inriktning mot estetik och hållbarutveckling. Jag har tittat på vilken miljöinverkan buteljerat vatten har, undersökt estetik som begrepp och gjort research. Detta är sedan följt av en designprocess innehållande skissprocessen, användarstudie, och designmetoder vilket leder fram till en prototyp av en produkt.

This report describes how a syringe pumpwas developed for Q-linea AB inUppsala Science Park as a bachelor´sthesis at Uppsala University. Thepurpose of the syringe pump is toreplace existing pumps in one of Qlineasdosage instruments. The reasons for whythe pumps are replaced are that they arebig and heavy. Therefore the task was todesign a smaller and lighter syringepump.The goal of the project was to create aprototype of the design that met themechanical requirements posed. Therequirements were met.In the report the work process can befollowed from the development of thespecifications to the final design andtests of the prototype.

This report aims to describing the work behind the development of a masonry heater.The masonry heater is developed in collaboration with the company Transient Design KB that is a product development company located in Alingsås. The company sees a possibility to cover a market segment where modern technology and design are missing.The report presents those methods and approaches that have been used and gives an overview to how the project has been carried out. It describes how the ideas behind the final results have produced and how they have been developed during the project's time. In the report you can also read about the final concept with its choices of construction and materials.The report is completed with a presentation of a final concept and a ground for possible future production..

Purpose: The objective of this study is to illustrate how participants in leaderless based projects communicate with each other. Several studies have focused on technology-supported projects, such as open source projects, with an established project manager and goal. There is a lack, to the best of our knowledge, in studies that deal with the communication pattern in a leaderless computer supported collaborative project.Method: We have chosen to use a quantitative method where we systematically group several messages according to their content. This method was used in a similar study to illustrate the communication between participants involved in an open source project. We have taken the same Kripendorff based method and adapted it to our study by adding more descriptive variables.Theoretical perspectives: Manuel Castell discusses the aspects of a new communication power that is rooted in the individual as part of a larger creative audience.

TitleThe communicative office ? A study of the effects that Activity based offices has on internal communication.      Authors                             Carl Varli, Jonas Eklund and Petter Göransson Course                              Business administration III ? Organization ? Bachelor? thesis Tutor                                 Olle Duhlin           Examiner                          Mikael Lundgren Background                      The prime focus of activity based office designs are the though of choosing your workplace along with your work task, instead of the other way around. This means that you do not longer have a set workstation of your own, you move around according to where to your current work will be best performed.  Problem                           We want to explore how the communication within a company?s departments has been affected by the introduction of an activity-based office design.Purpose                             The purpose of this study was to get an understanding of how this office design could effect the communication within companies that uses it. Further more, we wanted to study the effects that this kind of office would have on the communication within a department.

As a result of today`s competitive situation, the demand on the rapid development of research has increased. Both universities and companies are realizing the importance of a functioning and well-developed cooperation. A close collaboration and communication between universities and the business community has in many studies been shown to be very important for business development and knowledge transfer. The purose was to examine how communication and collaboration between universities and industry can be developed and strenghthen on the basis of innovative thinking. In order to initially identify the perceived problems the authors studied how communication and cooperation manifests itslelf today between the two parties, what does not work and how the existing tools for communication and collaboration look like today.