In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

Many design agencies and designers like to see design as a longtime strategic investment for any company. However, knowledge of design as a strategic resource depends on ones professional background and ones knowledge of design as such. It is common today that clients meet design agencies and therefore design with a certain skepticism concerning its role in the company. Within the prodctdevelopment-process the company?s different functions meet.

Chemical stabilization of mine waste from Ljusnarsbergsfältet with sewage sludge and calcium carbonate residuesMine waste from Ljusnarsbergsfältet in Kopparberg, Sweden, is considered to constitute a great risk for human health and the surrounding environment. Some of the waste rock consists of sulphide minerals. When sulphide minerals come into contact with dissolvedoxygen and precipitation, oxidation may occur resulting in acid mine drainage (AMD) and the release of heavy metals. The purpose of this study has been to characterise the waste material and try to chemically stabilize the waste rock with a mixture of sewage sludge and calcium carbonate. The drawback of using organic matter is the risk that dissolved organic matter can act as complexing agents for heavy metals and in this way increase their mobility.

I design a service building for the climbingcompany Klättertorpet.Klättertorpet is a small company that is situated outside Lysekil.Klättertorpet o!ers courses in climbing and campingsite."e new building will include kitchen, room for socialmeetings,gym, a small shop and safety lockers. "e starting point revolvesaround how to capture the companys values and philosophyin the design. "e purpose was to add value to the companythrough the design and for myself to get more experience ofworking with a client. During the project questions developedin to how to work with the hole lifecycle of the inertial in mindand how to make the place attractive to climbers. I worked withmodels, moodboards and sculptures to explore the form.

A district heating plant has the advantage that it can take advantage of the waste heat from industries and use of cheap fuels to produce heat. But for the long term is competitive requires that energy is also saved in district heating plants. One way to save energy in a district heating system is to increasing cooling to the return temperature. This leads to less power needed to drive the distribution pumps,  and that more energy could be extracted from the same amount of fuel by an improved flue gas condensation.In Karlskoga the return temperature into the district heating plant is high. They would therefore reduce the return temperature in order to extract more energy from the flue gases.

This report describes the initial work intended for updating the car sharing service Roadmate. Roadmate is one of the services received by the car rental company Hertz First Rent a Car. The goal was to present the client with design- and structure proposals for a car sharing service that includes high usability and at the same time remains aesthetically pleasing.The work is based on an initial study with data collection, mapping the target user group and its needs. Subsequent structural and design proposals for Roadmates company carpooling service are based on the facts surrounding the target group's needs. The result are well developed and tested design sketches with accompanying visual identity and sitemaps that can be the basis for the further work on the development of the service..

This paper describes the process of producing avatars for Jiddr. Today, social media surrounds the lives of youth, and communication via the Internet is an everyday occurrence for most people. Jiddr is an app that was created to give youths a platform for engaging with adults and other youths. It is a moderated forum which gives young people the opportunity to come i contact with adult role models who are knowledgable within various subject areas. On Jiddr, users are anonymous, and this is something I have placed much importance on during the design process.

This thesis investigates three different surface modifications, and the route to design and synthesize them. The thesis is therefore divided into three sub- projects. (i.) Design and synthesis of a peptide which secondary structure could be controlled by a negatively charged surface. (ii.) Design and synthesis of a cyclic peptide, that would self-organize prior to surface interaction, using the type I anti-freeze protein of a winter flounder as template. (iii.) The use of solid-phase synthesis to make the synthesis of SAM-molecules easier..

Design har en otrolig förmåga att föra utvecklingen framåt men det finns många som är kritiska till hur design utvecklas i västvärldens samhälle. Syftet med denna uppsats är att analysera open design för att ge ett alternativt perspektiv på industridesign. Open design handlar om en designprocess där vem som helst kan delta, utveckla och tillverka produkter. Metoden har sin grund i open source-rörelsen som hastigt spreds i och med internets utbredning. Open design är dock inte lika välutvecklat då rådande marknads- och företagssystem till viss del hämmar detta.

This project investigates the cooperation between architect and engineer. The context of the investigation is the design of buildings for a sustainable society. The goal of the project is to further the development of the sustainable built society by increasing the knowledge of the interdisciplinary cooperation between these two fields. The focus is a close cooperation already from the start of a project. By involving both fields in the early design stages it is thought that the knowledge and skills of each field is better utilized.

ABORT ?n GO is a design project within the crossing boundaries of Critical Design and IndustrialDesign.The contemporary discourse on abortion is problematic, and infected by double norms. Thesenorms may cause feelings of guilt and shame in women who have an abortion. The abortion rightis built upon conflicting standpoints; one is that women have right to have an abortion, withoutbeing questioned. Second is the notion that abortion is something that should be avoided, implyingthat you?ve done something wrong if you have had an abortion.With this project and physical product I want to explore and discuss the contemporary discourseon abortion in Sweden.

Studien undersöker om återföring av näringsämnen, huvudsakligen makronäringsämnena kväve och fosfor, från humanavlopp i Norrköpings kommun kan komma att ske på ett sätt som är i linje med naturvetenskapliga kretsloppsprinciper.Frågan om återföring av näringsämnen och dess problembild är av stor vikt då dagens flöden leder till både resursslöseri och miljöproblem som övergödning. Anledningen till att näringsämnen inte recirkuleras måste bero på någon form av oförmåga hos aktörerna att ta i tu med problematiken.Studien analyserar olika aktörers perspektiv. Aktörerna beskrivs dels i ett nationellt perspektiv men den huvudsakliga fokuseringen ligger på kommunal nivå. Detta på grund av att kommuners roll inom området innebär att de är ytterst ansvariga för utformningen av avloppssystem. Aktörer som agerar i förhållande till kommunen har därför undersökts närmare genom intervjuer med olika representanter för aktörerna.

This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.

In this bachelor thesis we have studied how interaction designers describe their profession. The research material is based on nine interviews with interaction designers. Questions cover areas such as interaction design tasks, what abilities they consider important, how they describe their relationship to the users, and cooperation with colleagues. We have analyzed the results using key terms such as habitus, field, and capital, as described by sociologist Pierre Bourdieu. The interviewees express humanistic views, and ask for more cooperation between interaction designers, as well as other people within the field of IT production.

Ericsson?s factory in Kumla, Modules Kumla, became a hub for radio modules and micro base stations, which enables mobile communication through radio base stations, in 2004. Because of this the factory focuses more on the logistics operations. This has led to a need to be able to plan the capacity for the materials handling system. This master thesis has therefore been performed at Modules Kumla to develop a capacity calculation model for the material handling flow during the autumn of 2005.The work has contained a mapping of the material handling flow regarding to which activities was performed and how much time they consumed.