Från början hade vi ställt in oss på att vi ville hitta ett nytt sätt på hur man kan designa IT-relaterade produkter med ungdomars välmående och hälsa i tanke. Detta visade sig inte vara den lättaste uppgift två interaktionsdesigners, utan någon som helst bakgrund eller insyn om människors välmående, kunde tänka sig. Efter mycket efterforskning både i böcker och på Internet började vi förstå att vi inte var ensamma i vårt mål att motverka att stress uppstår i relation till dagens informations teknik. Flera andra forskare med bakgrund inom sjukdomar, rehabilitering och medicin hade varit aktiva inom fältet men bara ett fåtal interaktionsdesigners innan oss hade försökt sig på något liknande. Vi fick mycket inspiration från deras tidigare projekt och vi har försökt använda oss utav deras kunskaper och resultat.

We have left the industrial society, and instead, we live in a post-industrial knowledge and information society. It is often said that industrial production has disappeared or that it has changed greatly. This means that fewer are employed in the manufacturing sector while the service sector is increasing, resulting in that the boundaries between production and administration decreases. The production goes from mass production to more flexible and specialized solutions. This puts greater demands on the logistics chain that continually need to work to meet customer requirements.

Aqeri has since the past year a new profile with name and logotype, which has createda need for an updated visual product identity. The company is a leading developer,producer and distributer of IT products suitable for extreme environments in industry,defense and vehicles. This new profile with the different segments has together with aproduct identity from two companies resulted in that they have no clear designidentity on their products. From this background the aim of this research is todetermine how a development of a design identity is done to implement it to Aqeri.The design identity can be defined as a product?s identity visualized through its formor appearance which defines what the product is.

On today?s competitive market, it is difficult to achieve profitability trough high prices on manufactured products. Profitability must be obtained through low manufacturing costs, high quality and short lead times. One of the companies on the market is Sandvik Coromant, manufacturer of tools and chips for metal cutting. This master thesis investigates the methods of manufacturing for boring bars at the manufacturing unit GVH4 at Sandvik Coromant in Gimo, Sweden.

The project has involved the development of two kinds of shooting targets in partnership with Marcus Bergkvist and Christopher Åkerblom. The project from the client was divided into two parts. This thesis discusses solutions for hands-on transport, development of tripods and an overall design. The second thesis affect resetting systems for the products.The work was done with a process and methodology based on design perspectives. This process has involved the search of relevant data which has provided the platform and opportunity for appropriate and purposeful design work.Concept development has been done using hand sketches and Photoshop, where a simple visualization of different concepts for the tripods has been produced.

Design är en stor del av vårt samhälle. Som studenter på slöjdlärarutbildningen vid Göteborgs universitet har vi upplevt att design får en allt större plats i undervisningen. Studien undersöker vilka kopplingar det finns mellan design och slöjd och hur man kan arbeta med det i skolan. I studien har 10 designstudenter vid Göteborgs universitet och Linköpings universitet blivit intervjuade. I studien användes kvalitativa intervjuer som metod.

The task given to us was to develop an industrial wheel with new thinking in terms of fresh design and construction, with the ability to brake. While the produced wheels of today only own the property of total braking, a wish was made to integrate the ability of directional locking.The time spent working with the project has been filled with multiple sketches of ideas and function analysis.Choices of material and ways of construction have been verified by calculations, tests and prototype building. The goal of this thesis has been to develop a unique caster with well thought-out design that would be adaptable to different areas of applications.The result was a hubless wheel with the ability of directional locking before total braking.A prototype of the wheel has been made to show the design and functions..

Every year the Swedish government invests capital in different projects. In recent years the Swedish government has chosen to invest in design. The reason for this is that the government wants industry to use design as a competitive source. Two organizations, Svensk Form and Stiftelsen Svensk Indistridesign, have been assigned to improve industry and society?s under¬standing of design.

Uppsats för avläggande av filosofie kandidatexamen i Kulturvård, Trädgårdens hantverk och design, 21 hp, 2010.

The objective of this thesis is to map the resources and methods used at the department OPPC, at AstraZeneca, and derived from that give suggestions on possible solutions that will increase their productivity.Mapping of the product flow, as well as gathering of process data, has mainly been done using observations, but consultation with the process technicians has also played a great role. Further have theoretical methods been used, based on literature studies, within the areas of Lean production and statistics.The work has incrementally gone forward since the steps taken has been restricted by the irregularity of production which led to the need of creating a fictive production flow. This has affected the lead-time calculations in the way that they are meant to give an indication, rather than an absolute truth, on how different methods described shall be used.The current state analysis showed multiple areas of improvement when defining capacity as value adding time in relation to total throughput time. Using the "standard scenario" as a basis showed that the actual production flow only constituted 50% of the total project time. Further it showed that the workflow contained more non-value adding activities than value adding activities, which is a result of how the work is distributed within the department as well as in the different projects.

Since 2004, wind power has had the largest installation of new capacity compared to other energy sources in Sweden. Accommodating new wind power may require strengthening or rebuilding of the existing grid in areas where the grid is already loaded to maximum capacity. This master thesis examine the possibility of a new 400/130 kV substation in Yttermalung, Sweden, with a connection to the two neighboring regional grids in Dalarna and Värmland owned by Fortum. This substation would provide a new connection point to the Swedish transmission system as well as an interconnection of the two, currently separated, regional grids. Different expansion scenarios where a substation with and without series compensation or a phase shifting transformer (PST) to control active power flow were studied.

Through a case study at an IT company we have attempted to ascertain how a company's organizational culture affects its designers' way of working. By examining what ?type? of designers the employees are and how this is reflected in their work, we hope to have correctly determined what their organizational culture looks like and thereby have achieved a plausible result in our study.Aside from two interviews with the company's CEO, we also performed eight observations at the company, where we tried to blend in with the employees, to better determine their way of working together.We have found that the designers' trust in their own instincts has led them to rarely act on feedback from clients ? they only pick out the proposals which have a ?mainstream? potential. We have also discovered that their design approach is something they don't feel inclined to discuss amongst themselves. As it is often ?indescribable?, they go with their intuition and unspoken design conventions..

The thesis that follows is performed in collaboration with Nitator in Oskarström.The factory in Oskarström focuses on laser cutting, robotic welding and surfacetreatment of steel for the automotive industry.The project aims to streamline the flow of materials in production by automatingthe movements of the forklifts, running to and from the interlayer, and betweenworkstations.The project started with a systematic literature search. The literature searchshowed the research position around the AGV-system. Also a review of studentliterature was made, so that a suitable method for practical implementation couldbe developed and applied. Selected method uses both quantitative and qualitativeapproaches, which is analyzed by using triangulation.The work has resulted in a modified layout of the current facility in Oskarströmthat can be used for the implementation of the AGV-system. It has also resulted inthe tender documents and profitability calculation from several of AGV-suppliers..

In the year of 2009 the conditions for managing primary healthcare in the region of Västra Götalandchanged. The decision was taken by the regional assembly and resulted in that the citizens since thenhave had the opportunity to choose which health care provider they preferto stay with. Along with thisdecision a new market for private health careproviders was established, which resulted inincreasedcompetition between the providers.In order to manage the competition, the health care providers arenow forced to be more efficient in their operations andalso to beeven more focused on their patients.Backa Läkarhusgruppen is an example of a private healthcare provider in the region of Västra Götaland.In the same way it is also an example of anorganizationin need of analysing their operations to seehowit can be further optimized to meet patient needs and expectations.The aim of this study is to analyse Backa Läkarhusgruppen?s organization and its operationsin the hopeoffinding suggestions whichwill improve the patient flow.To allocate and solve the problems thatBacka Läkarhus suffer from,an approach inspired by Lean Healthcare is used throughout the report.Some of themost significant problems that were identified within the organization are:?The synchronization of demand and capacity is inadequate.?Absence of standardized routines.?Absence of present leadership.To be able to improve the patient flow Backa Läkarhus needs to handle these identified problem areas.By synchronizing the staffing level in relation to the trends in demand a reduction in the patient?swaiting times and throughput time will be possible. Creating clear responsibilities and routines for thestaff will contribute to a higher degree of patient focus and thus lead to a more efficient patient flow.

I detta papper, designas och utvärderas en händelsebaserad Android-applikation. MyWorld är en mobil applikation. Händelser som sker i användarens närhet kan ses på en karta. Genom arbetet används beprövade metoder för att skapa en väldefinierad design. Det tas upp problem och lösningar på designrelaterade problem i en händelsebaserad applikation.