AbstractWork to develop the Eurocodes started in 1975 by the European Commission adopted a program to eliminate trade barriers within the construction area. The goal was to create common European design standards that would replace the member countries' own rules. Eurocodes will replace The National Board of Housing Building and Planning, National Rail, The National Road Administration and other agencies' calculation rules for the buildings structures. The transition to the use of Eurocodes looks like this:Eurocodes set to Swedish standards  between 2002 ? 2007They can be used parallel with national standards 2006 - 2009 The total transition is at the end of 2010/2011.Right now is going on a lot of work for replacement of the existing standards to Eurocodes.  The transition to the new calculations` standards, many construction companies and consulting firms facing a big changes and competitions.

This thesis is basically a design project aimed to find a safe and reliable automatic safety device, which is designed to be suitable for highly automated industrial situations. This device fits with ABB / Jokab Safety?s fence systems. These are built up around machines to create safety distances. The automatic protection device assist the operator in situations when loading or going in and out of the danger zone.

Is it possible that by planning in a more sustainable way when building a new area, we can improve our environment?Most environmental problems are created in cities and therefore they should hold the solution. Through a more ecological urban planning a better foundation for sustainable housing could be created.This report follows the process in coming up with a proposal for a master plan for an area in Odense, Denmark. By going through principles for sustainable urban planning made by different organizations and persons and from these extract main principles, a background is founded to continue the proposal from.Denmark works a lot on expanding their green areas, maintain the existing ones and recreate what?s being destroyed as cities expand.

 Agila metoder är en relativt ny ansats inom programvaruutvecklingsområdet och ses som en reaktion mot plandrivna metoder som har svårt att hantera oförutsägbara och skiftande krav. Agila metoder förespråkar nära och frekvent kundkommunikation och iterativt arbete för att ständigt kunna skapa, prioritera och verifiera krav. Dock uppmärksammar inte agila metoder aspekter som berör programvarans användbarhet. Syftet med rapporten är därför att integrera användarcentrerad design för att öka fokus mot programvarans användbarhet hos agila metoder. Användarcentrerad design är en process som fokuserar på användbarhet genom att användarna är en central aspekt i utvecklingsprocessen.

This report describes the process of outlining a design proposal for a resource planning tool for TV post-production. A feasibility study in form of a participant observation has been carried out on-site, which has resulted in a requirement specification. Based on the requirement specification, mockups have been created to illustrate the functions and features that a final planning tool should have. In addition to developing a design proposal, an evaluation of the existing resource planning tool Ganttic has been conducted. Ganttic has been reviewed based on how well it meets the list of requirements.

A woman is dying of cancer, she refuses to use her walking aid. Because she is embarrassed. This means she can?t leave her house, and her last days become very limited.Why do we act like this?Can the view we have of products adapted for disabled be changed by working with colour, texture, form and materials?There are many products adapted for disabled, the products often have a good function and well developed ergonomic aspects but the visual aspect leaves a lot to wish for. There is neither effort nor money put in to the exterior design of most of these products.A lot of the solutions that are invented for adapted products can be used in design of ?regular? products.Why should we then divide products in to adapted and non-adapted.

The purpose of this essay is to function as a guide in the future development of the Umeå University Library?s webbsite by examining its users? web experiences as well as their web surfing behaviours. In this essay, a number of opinions in usability and accessibility coming from writers and organisations are presented. Using the writers? theories and previous research, along with the results from the evalutation, the essay attempts to explain the behaviour of users when they get in touch with technology, aswell as what the web users perceive as user friendly.

Debate over Intellectual Property Rights ?IPRs? particularly patent and copyrights is mainly on forward-looking industries in computer software. As part of a trade deal reached in 1994, the member nations of the World Trade Organisation must adhere to a global agreement known as TRIPS, for the Trade- Related Aspect of Intellectual Property Rights.This study is to analyse the ethical conception of Intellectual Property Rights and in particular its implications on the developing countries in relation to TRIPS. The approach will be to analyse a broad philosophical theories of property to see if there is any justification for a software program to be treated as private property and also argue base on John Rawls two principles of justice in relation to TRIPS Agreement. Some reflections will be put on the use of open-source software by less developing countries.From the study it was asserted that, strong IPRs protection would hinder technological transfer and indigenous learning activities in the early stage of industrialisation when learning takes place through reverse engineering.

   Officially, Sweden has a very low level of corruption and in 2008 topped Transparency International?s list in terms of the perception of a lack of corruption. However, on closer examination it would appear that the Swedish public sector is not as clean as the Transparency International list suggests. What appears to be relatively common and quite widely accepted in Sweden, especially in local government, are conflict of interest situations in which public officials use their position to obtain advantages for themselves, their friends and their colleagues, in particular with respect to public procurement. According to the Swedish constitution, the public administration shall be governed by the principles on legality and objectivity. Grave violations of these principles are deemed illegal and contrary to the penal code provisions relating to bribery, public misconduct and breach of confidentiality.

The contact company, LRF Konsult, is a consulting firm specialized in areas of law, real estate, finance and taxation. Discussions on the subject of agricultural improvement in the area of Lean, has primarily been driven by the Royal Swedish Academy of Agriculture and Forestry, where LRF Konsult also participated. This thesis can be seen as a preliminary study of how Lean can work within agricultural enterprises.The thesis primarily focuses on the possibilities dairy farms have to improve operations. What practical benefits they can obtain through the implementation of Lean. And how an implementation could take place.By visits to two dairy companies, and through interviewing their respective business leaders, an image of the companies activity for improvement, in connection to this thesis was established.

Personal assistance from a welfare perspective, offering a variety of reasons is perceived as a different design assistance than is usually there in the public social assistance depending on the strong foundations of the handicap principle autonomy and influence is in terms of how, what and when the operation is performed. The aim of our study was to highlight the handicap principle influence and autonomy in the operation of personal assistance. It is intended both to illustrate the legislature's intentions and ideologues expectations and also to examine a number of managers and personal assistants experiences of the conditions that exist for realize these principles. In order to answer our purpose and our issues, we have chosen a qualitative approach. We have first conducted a literature review and secondly implemented six interviews with personal assistants and managers.

In this thesis we present the procedures and outcomes of adopting two roles in a study: the role of a researcher and the role of a designer. The subject is crossmedia design. Crossmedia is a growing and changing trend for media producers of today its design is of great importance. The purpose is to create a concept from scratch that stands out from the crowd and engage people with the use of cross media as the approach. We also aim to investigate if a cross media designer can rely on previous research made within this subject or if the scene has changed.In order to test and to fully understand the process of the subject, we designed a crossmedia concept, based upon previous and related research.

There is a lack of published material regarding designing graphical user interfaces of so called integrated video uploading services. The term integrated video uploading services refers to homepages that do not have video uploading as its primary purpose but which still offers that service to its visitors. The aim of this thesis was to improve the amount of published material about designing graphical user interfaces for integrated video uploading services. This was done by performing a literature study to find general design guidelines which can be applied to design of integrated video uploading services. Thereafter the functionality and design of dedicated video uploading services was analyzed.

The last few decades the development in the field of electronics has been huge. The components performance gets better at the same time as the manufacturing cost decreases. Many of the design moments that have to be done, are done automatically today, but it can get better. Especially for analog circuit design.At Electronic System in Linköpings universitet, research is in progress to develop a tool that can design analog circuits in reasonable time. It means that it has to size the components (transistors, resistances, capacitances etc), so that the circuit can fulfill the performance requirements.

In September 2014 the ECJ issued its decision in C-7/13 the Skandia case. The case con- cerned service transactions made between a main establishment in a third country and its Swedish branch. The branch was a member of a VAT group in Sweden. The ECJ estab- lished that the membership resulted in that the VAT group was considered as one taxable person which meant that the services was considered provided to the group itself and not the separate member. Therefore the transactions were deemed taxable.