Management of large carnivores involves more than just the management of animals, people also have a large influence. The Swedish parliament decided in 2009 that the county boards should use co-management to a greater extent in management. This shows how important human dimensions are.We know from previous research that the majority of people in Västerbotten are positive toward large carnivores and the management done by the state, however there is a negative minority which should not be neglected. This paper contributes with an examination of attitudes toward large carnivores, wolf, bear, lynx and wolverine, in Västerbotten County. The data for this study were derived from a survey that was sent out to 150 randomly selected persons in every commune in following counties: Norrbotten, Västerbotten, Jämtland, Västernorrland, Dalarna, Gävleborg and Stockholm.

The purpose of the project was to design a furniture collection that can be packed in flatpackages and be assambled by the buyer. The idea is that the assembling will give the furniturean added value. I have tried to create a collection that is easy to produce so that the productwill be cheap for the consumer.The collections aestethic is inspired by Gothenburgs harbour The wide and bearing elementsof the furniture has set much of its expression.Joints has been highlighted details instead of being hidden..

The subject of this master level thesis in historical osteology, is a study of waste management in the medieval town of Lund. The aims of the study is achieved through looking at the taphonomic aspects of bonefragments from the quarter Blekhagen. The study is divided in two separate sections, one that is a litterature study of what is known about waste management, and another one that contains a taphonomic and spatial analysis. Through examination of the taphonomic variables weathering, average weight and trampling and a spatial analysis, I am able to deduce that there are signs of controlled waste management in the material. It is not possible to draw any general conclusions about waste management in the medieval town however.

The work presented here aims to give the owners ofChâteau du Grand Val, Roland and Marie Nilssond?Aubigné an integrated creative forest management planin which their goals with the property is heeded, andwhere the plan is so clear that they can follow it withoutmuch difficulty.This work has come about through the normal processesof forest management plans, landscape architecturalproposals as well as through field trips, field andliterature studies, and our combined experience fromour studies. The study visits, both on location in Brittany,France, but also in other places, as for instance Högestad,has provided the background information that formedthe basis of our analysis and the proposal that is derived thereof. Some suggestions, which we consider importantto the overall impression of the property, is provided amore focused and detailed solution, while other parts,which are important but can either benefit from havingdynamics in the design process or will be adapted toadjacent sites, are developed using a more generalapproach. In some cases several possible developmentprinciples are presented.The proposal presents a detailed plan for themanagement of the forest from the experience, wildlifeand forestry economic standpoint.

This report describes how the process has evolved during the creation of a new web page forthe company Scandinavian Travel Agent DMC. The design methods that have been used aredescribed and also how parts of the webpage have been created by using the design methodresults. Our reflections around design and functionality are explained and how usability hasbeen our main focus during the master thesis. We also describe how it has been to work withan external costumer and how the tasks constantly have changed and been added as theprocess has continued.The background to this work is that AB Scandinavian Travel Agent DMC need to improve theircurrent web page. This to give the clients better needed information about destinations, butalso to stand out in the competitive travel business.

This thesis studies private equity firms' implementation of management control systems in their portfolio companies and whether the systems are affected by cross-national differences. A comparative case study examines five different private equity firms to derive if there are any differences between the private equity firms' management control systems in the United States, Europe and China. The empirical observations are categorized according to the framework developed by Merchant (1985) and further developed by Merchant and Van der Stede (2003). Theory on the effect of multinationality on management control systems, also developed by Merchant and Van der Stede (2003), are used to explain possible findings. The applied theory includes the cultural dimensions developed by Hofstede (1984) and Hofstede and Bond (1988).

Problem discussion: Syncron experience a challenge in realizing the full market potential of its newly developed IT-based price management system, Global Price Management (GPM). The system has already been implemented and is currently running with success within the IT-structures of the first customer. The fact that the development of the system has been initiated by a customer, and thereby has left Syncron oblivious of the real underlying drivers and incentives for the development, is part of the problem. Understanding the customers? incentives for developing their pricing process thus reducing the application uncertainty is a good starting point.

The purpose with this final thesis has been to study the aesthetics and design of roundabouts and to ascertain important factors that influence the experience of them. The investigation was carried out through literature-, field studies and interviews with persons that in different ways have participated in the formation of roundabouts. Furthermore, six roundabouts have been explored in more depth so that the survey would get a more practical link. These six roundabouts all occur in the rim of a city and do thereby have an important role as a gateway. The environments in such contexts are often complex which adds additional difficulty in achieving a visually appealing design, especially when taking into account the usually high traffic intensity.

The aim for my thesis has been to investigate how literature, or fiction, is used in management education. What books are used ? is there a literary leadership canon? What do the educators and the writers on this subject suggest that these books can teach the leaders? What are the philosophical foundations of this education? And ? last but not least ? does what the educators and writers offer respond to the needs of the businesses? My investigation shows that there is a canon in the area of management and fiction, where realistic 19th century novels, alongside with Shakespeare?s plays are dominant. Female writers and non-western writers are very underrepresented. The positive outcomes of reading and discussing these literary works that the educators and writers suggest do substantially correspond with the needs of the businesses, as presented by my sources.

Syfte: Vi vill öka kunskapsmassan kring huruvida konsumenters tolkningar av logotyper ligger i linje med kreatörers tankar. Metod: Induktiv ansats, kvalitativ metod i form av 16 konsumentintervjuer och 3 expertintervjuer. Den information vi har erhållt har legat till grund för våra senare delar. Teoretiska perspektiv: Corporate identity och visuell identitet, vidare har områden som färg, teckensnitt och symboler studerats. En empirisk studie om logotyper har också legat till grund i vårt teoriavsnitt.

The aim of this study is to get a deeper understanding about user tests as well as answer the question about if testing for users is necessary at all times. I've done a comparison between what the literature says, and what a company says, about testing. The tests that's been in focus in this study is prototyping and card sorting tests. Prototyping aims to give the developer feedback about the design and check if there are any obvious problems with the design. A card sorting test can be used to get input about how information architecture should be constructed.

The purpose in this Bachelor degree project has been to create a visual identity and to design a compilation cassette for the small music distributor Kyrkvägen Kassett. My way of approaching the task has been to draw parallells between the cassette as an obsolete music format and more or less abandoned or anachronistic formats, materials and printing methods in the graphic design area. The result is a visual identity that is built upon materials and methods of production rather than specific visual elements. The work is to be seen as a tribute to the small non-profit producers of music and graphic design. As often done in the DIY movement, I chose to consider my lack of practical knowledge in these fields not as an encumbrance but as an asset and an incentive.

This report describes how we made a dynamic website combined with staticalweb pages and a web shop for the Swedish company Tyger & Ting.The employer Tyger & Ting wish to run a working web shop on their site butthey want to keep their old system of updating pages with their old applicationfrom Intellyweb1, which creates statical HTML pages.The goal of this exam paper has been to learn to create a functional web shopwith user friendly layout and appealing design and also to take orders andfulfill wishes from a real employer.The report is describing how Intellyweb?s application and its statical web pageshas been implemented on a dynamic web page. The report does also describehow this site has been build and how the problems with the coding have beensolved. The coding has been made with HTML, PHP and MySQL. CSS hasalso been used.

Uppsala University is involved in a large international collaborationto build the Laser heater system for the European Xray Free-electronlaser in Hamburg, Germany. In this thesis I describe a laser incouplingdevice into the vacuum chamber of this laser heater all the way fromthe specifications to a completed design.The laser heater is a very important part of the XFEL and thepart described here is a part of the vacuum system needed to couplean external laser into the electron vacuum system and align it withthe electron bunches in order to heat them. The task was started by studying the literature about the basic theory andthe design of vacuum systems. After this study and collection of ideaswith colleagues I started to prepare different concepts to solve thetask. The ideas can be put into two categories, in one case the couplingmirror is located inside the vacuum chamber and in the second caseoutside.

Title: Bottleneck management through materials administration Course:  4FE05EAuthors:  Mikael Karlsson and Johannes Mueller  Examiner: Helena ForslundKey words:  Bottleneck management, material management, process description, timber, proceduresPurpose:   The objective of this study is divided into three parts, all three parts of the purpose aim for the same goal. Namely, to improve the material management so that this enables the bottleneck in the planing mill to keep a continuous  flow, and thereby minimizing the risk for production stops at LB-Hus.  Part.  1:  Identify  and  analyze the material management  connected to  the planing mill  in order to identify problem areas.Part.2:  Identify  improvement potential  in the material management connected to the planing mill.  Part.3: Suggest improvements in the material management connected to the planing mill. Theoretical framework: Process mapping, inventory accounting, balance safety, inventory availability / service levels, safety stock and reorder point, forecasting and routine descriptions.Empirical foundation:  Interviews carried out at LB-House,  illustrated with the help of process maps and a description of each process.  Conclusions:  To work with  the  suggestions  given  and  to  follow  clear procedures  in  all  processes would  result in  a more  efficient  inventory management,  it would also present  a  solution  to  the problem regarding the planing mill being a bottle neck.Suggestions for further research: Review and map the information flow from demand to production start.