This thesis introduces Kongjian Yu?s design approach in terms of industrial heritage conservation in connection to transformation and urban design. The approach is examined respectively on two cases from China and USA. The thesis give a brief introduction to current achievement in conservation research and general profile of industrial conservation practice. Based on case and theory study, Yu?s design approach is carefully applied to an industrial area Nyhamnen in Malmö and a design proposal is produced.

Urban density is not new, but rather one side of the continous processes of change underway in the city. During the urbanizing boom of the industrialization, when the cities grew bigger, the first spaces to be built on were vacant and planted areas in the interior of the district. The gardens that once were there were replaced by yardhouses. The idea of urban density is that a dense city means less distance between residential areas and workplaces, resulting in fewer shipments and travelers, which ultimately leads to lower energy consumption and lower emissions. Urban density may lead to shorter distances, but not necessarily. In the wake of urban density the greenstructures of the city is shattered. The possibilities for green areas to contribute to the health of the city and its inhabitants is dramatically reduced.

Rapportens syfte är att arbeta fram förslag till en hållbar förnyelse av bostadsområdet Gulsparven i Trollhättan, på uppdrag av AB Eidar Trollhättans bostadsbolag. I dagsläget har området energirelaterade problem och är i behov av upprustning. För att komma fram till goda lösningar har litteratur- ochinformationsstudier, intervjuer med erfarna personer samt inventeringar av området gjorts. Förslagen åskådliggörs i form av ritningar samt 3D-vyer.Fyra förslag till förnyelse har tagits fram med olika grad av åtgärder, där två av dem kräver en omprövad detaljplan. Generella åtgärder, vilket gäller i samtliga förslag, är betydelsefulla lösningar för att växa mot rollen som ett hållbart bostadsområde.

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.

Denna studie behandlar Turkiets turistdestination Alanya utifrån ett hållbarhetsperspektiv. Vidare om all-inclusivehotellens påverkan på destinationen. Syftet med studien är att undersöka de sociala, ekonomiska och miljömässiga faktorerna. För att analysera detta använder vi oss av teorier som berör hållbar utveckling och hållbar turism samt positiva och negativa aspekter av all-inclusivekonceptet. Metoden för undersökningen är kvalitativ där en fält- och intervjustudie genomförs i Alanya.

This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

The Main problem: How small-sized manufacturing companies can create and sustain a stable position in the industry, which leads to profitability.Purpose: The purpose with this essay is to compare two small-sized manufacturing companies, Datek Industrielektronik AB and AB Micatrone to study which strategical resources each company possesses. At the same time analyse if the strategical resources are to be consider as sustainable competitive advantage.Method: A case study has been implemented in two small-sized manufacturing companies. The collected primary data derives from semi-structured interviews.Theoretical framework: The theoretical framework is based on The Resource-based view where the independent variables are the VRIO-model, resource tree and external resources. The dependable variable is sustainable competitive advantage.Empirical foundation: The empirical foundation is based on the compilation of the few conducted interviews with Datek and Micatrone.Results & Conclusion: Datek and Micatrone show both similarities and differences in what creates their sustainable competitive advantage. The management of both companies creates according to the VRIO-model sustainable competitive advantage.

A current issue today is to try to implement creative design as a way to solve wicked problems in scientific contexts such as HCI. Since the problems are wicked, they have no given solution which makes the traditional methods inadequate. In these cases, creative design can be an alternative. Creative design is not used in scientific contexts because it is viewed as something unaccountable.In this essay we argue that creative design not necessarily have to be unaccounted. We discuss various views of creative design and translate theory to a practical context.

Babies born prematurely are deprived of normal sensorimotor stimulation when placed in an artificial environment, the incubator. The aim of this project was to design a series of products that could promote the baby?s emotional and neurological development, and to facilitate parental bonding. The products designed in this project has a theoretical basis on the research available today on cognitive and emotional development in children born prematurely. They were developed in close cooperation with a group of parents and nurses in a neonatal intensive care unit.Presence is a product collection for developmental care, consisting of a mattress, a figure and a necklace. The mattress has vibration sensors that transfer the mother?s heart beat and speakers with recorded heartbeat and her voice.

The retail sector is in a continuous development. What demand looks like and where the consumers want to shop has changed during the last years. Market place, demand, supply, external factors and politics affect how the retail sector develops. To make a market place attractive a variety of factors have to be considered.In Hong Kong a model called Rail & Property is used, this means that the development of the subway is integrated with the development of the city. The model is both successful and economically sustainable.Today the supply of shops and services in Stockholm´s subway stations is rather small.

The use of mobile devices has increased dramatically in recent years and the development of newtechnologies has made it difficult for developers to know what screen size and device the visitor isusing. This has resulted in the fact that today there is a problem with the interface for web pages onmobile devices. They are not adapted to the flexibility required for the interfaces to be recognizedon various mobile devices. Instead of developing two separate web pages, where one is designed formobile devices and one for desktop and keep them both continously updated, responsive webdesign simplifies the work process. Responsive web design is a flexible and dynamic interface thatadapts to mobile device and screen sizes.

This study investigates and describes the phenomenon of ?technical tourism?, in the case ofwind power plants in Sweden. The main purpose of the study is a greater understanding ofa field which to date has remained largely uncharted.Technical tourism is a type of visits to a production site, where the technical aspect ofthe production is the main focal point for the visitor. The definition of technical tourism isbased on concepts within ?Industrial tourism?.

Syftet med denna studie har varit att undersöka hur planerare i svenska städer kan arbeta för att minska invånarnas bilresande. I studien har Umeå kommuns arbete med hållbara resor analyserats genom att studera olika plandokument som tagits fram för att vägleda den samtida och framtida planeringen.Tidigare studier visar att det finns ett antal gemensamma nämnare för städer som visar på goda resultat för invånarnas val av hållbara resandet.  Planerarna har haft olika angreppssätt på prioriteringen av trafikstrukturen i dessa städer. Det gemensamma för städerna med goda resultat är att de har planerat långsiktigt, med ett hållbart resande i fokus.Av Umeå kommuns planeringsdokument framgår att visionen för tätorten har många delar gemensamt med dessa städer, varav målen för hur bilberoendet i staden ska byggas bort är det tydligaste. Efter att ha studerat Umeå tätorts nuvarande markanvändning, uppsatta planeringsmål och politiska beslut framgår det dock att översiktliga planeringsdokument och faktiska resultat ligger relativt långt ifrån varandra.

When different type of programs are developed one wants to make these adjustable to future changes and requirements. It must be done a good design of the program from the beginning to make it possible to continue development of it without having to redo big parts of it to high costs. In the area of object orientation there are design pattern, which can be used to design systems that can be adjusted to new changes in an easier way. I have in this thesis chosen to take a closer look at how to design a program that sends SMS to cell phones through a system of an operator. One requirement on the program is that it has to be possible to change what operator to send though in an easy way.

Is it possible that by planning in a more sustainable way when building a new area, we can improve our environment?Most environmental problems are created in cities and therefore they should hold the solution. Through a more ecological urban planning a better foundation for sustainable housing could be created.This report follows the process in coming up with a proposal for a master plan for an area in Odense, Denmark. By going through principles for sustainable urban planning made by different organizations and persons and from these extract main principles, a background is founded to continue the proposal from.Denmark works a lot on expanding their green areas, maintain the existing ones and recreate what?s being destroyed as cities expand.