Background: The project controller is a function witch evolved due to the strong gaining ground of project operation. Why the area of the project controller is interesting to study is explained by the fact that increasing knowledge of this function is important in order to make project operation work well. The fact that opinions in this field disagree, further increases the interest of the field. In order to study the function of the project controller three companies have been singled out. They are IFS, Intentia and Saab Bofors Dynamics.

There is a settled stereotype for women and men which give them different possibilities in our society. The schools, which are one of the most important sources of knowledge, have a great possibility to influence. This is the reason why we are interested in how the schools are working with a project, which we will call X henceforth. What was the purpose with the project and what does it contain? What is missing in the former education, since the project was started? Are there any obstacles or prerequisite in the design of the project or in the school teaching on the basis of X? We have done interviews in the gathering of empirical material to find out all the answers to our questions.

This Degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..

This Degree project aims to investigate the potential and possibilities for conceptual energyanalyses in the early stages of the design process. Many key decisions are made in theearly stages of a project regarding the shape and orientation of the building. Conceptualenergy analyses can provide the architects with insight regarding different design option?srelative energy performance.As the demands for more sustainable buildings increases, so does the need for earlyenergy analyses. Performing analyses in the early stage requires many assumptions andguesswork which could lead to a large margin of error.The offering from Autodesk is a module in Revit Architecture/MEP and the stand aloneprogram Project Vasari (under development).

The purpose of this bachelor thesis is to examine the similarities and differences between best practice literature regarding digitization and an existing cultural heritage digitization project. It also aims to determine whether this literature is of any help during an actual project of digitization. These results were achieved by examining literature regarding best practices in digitization and analyzing how well an actual project correlates to this advice. The information about the Digidaily project was obtained through two qualitative interviews as well as the project blog. The outcome of our research showed that although there are a great many similarities between theory and practice, the project in question was not helped by literature.

This Degree project includes both a theoretic component and a practical component within the graphicprofiling domain. Literature on graphic design has been studied for the theoretical part and the achievedknowledge has been used for the practical part. The project has been to produce graphic materialfor ?Rookiefestivalen? in Hultsfred.In modern society it is important for a corporation to distinguish itself from others by using a graphicprofile. Through using a graphic profile the company can have an affect on how it is perceived byothers.

AssiDomän Frövi board mill has in cooperation with students from Graphic Technologyat the University of Dalarna a Degree project that involves developing package solutionsin carton material from AssiDomän Frövi. This year the basic condition was to use theweights 270g/m2, 300g/m2 and 330g/m2 and choose between Frövi Bright, Frövi Lightand Frövi Carry.The packages were supposed to be in the segments industrial products,chocolate/sweets and beauty products/cosmetics. Two packages were produced in thesegments industrial products and beauty products/cosmetics.The first package, produced in the industrial segment, contains textile color and templatesand the second package is a gift package and contains nail polish.The investigation part of the project deals with how the packages today are fit forrheumatics in opening purpose..

Background: The development of the IT-industry, where new technologies and new services continually arise, has led to new players with different specializations. The increased degree of specialization means that these players need to cooperate with each other in different types of projects.Problem definition: What factors are important in a project to achieve the objectives as quickly as possible? More players should lead to cooperation difficulties, how can you coordinate in the best possible way? Today, it is desirable for all parties in the project to shorten down the lead time.Purpose: The main purpose is to explore the different factors that affects the project's lead time concerning broadband installation. The part purpose, is to analyze and assess the conditions for cooperation between different players in the project for broadband installation and to provide a recommendation.Method: In order to answer the problem definition, the paper is structured around a qualitative approach with interviews to obtain data. Mostly, the used data comes from primary sources with an extension of secondary sources.Theories: Theories that are used in the paper are: Communication Process, Communication Plan, Project Planning & Project Plan, Efficiency through collaboration, Communication in a network.Empiric: Empirical data consists of primary data collected through interviews.Analysis: The analysis is based on the variables from the theoretical frame of reference; Communications, Planning, Interaction & Information.

In most software engineering project, users are only involved in the beginning of the project as a help to design the requirements specification but users can be involved after this phase too, but is it effective to do so? With this report we would like to investigate how effective it is to involve users after the requirements specification has been written and approved. To find out how effective it is to involve the users we try some fast and simple involvement techniques on a quite far gone project. These techniques include ethnographic studies, prototypes and surveys. We also interviewed a couple of people who work with usability and finally delivered a report with our results to them to find out if they found our result relevant.

This Degree project has been carried out by Niclas Andersson and Sebastian Zwahlen, students of the Innovation and Design Engineering Program at the Faculty of Technology and Science at Karlstad University. The project was carried out during the spring 2010 and includes 22, 5 ETCS credits.Initially the group had contact with the company Mavis möbler AB. Mavis gave the group the task of developing a new bedroom product. To assess the needs and problems of bedroom behaviors, an extensive questionnaire and several interviews were made. This became the starting point for further work.According to the results uncovered during the market research a vast problem was found with temporary clothing storage.

This Degree project has been carried out in cooperation with Gedevelop in Helsingborg.Gedevelop has developed a camera that can calculate the weight of a liquid glass mass.Because of the density and viscosity changes in the glass, the weight information issometimes incorrect given. Glass industry is today addressing the problem by an operatorperforming a manual weighing of a few bottles which, in turn, calibrates the camera system.The project aimed to develop an automated system to control the weighing of glass bottles forglass industries. This system must be so flexible that it can be easily mounted on plants withdifferent production equipment around the world.The project includes design and construction of equipment that meets the requirementsformulated together with Gedevelop. Work has been done both in Halmstad and Helsingborgand has included both calculations and review of the theory to understand the forces thatinfluence the design of different construction parts. A prototype was produced that meets theoperating requirements for the design and can be used in testing features.

This Degree project has been carried out on the commission of AB Borlänge Energi. The purpose of thisproject was to redesign the magazine Energitrycket. The magazine should inform about the current eventsat the company. The work consisted of redesign of the existing magazine and adjustment to copying andpublishing on the web.This project also contains a research about how paper and colour affect the print results. It shows thatthe maximum contrast and sharp image reproduction is best achieved on woodfree, coated, calenderedpaper with high whiteness.

The Degree project has been implemented abroad in Brisbane, Australia. A literature study has beenperformed parallel to the practical work within the subject »Corporate identity through graphicaldesign«. In this study deeper research has been made concerning the establishment and manifestationof a corporate identity and its program. The knowledge given from this study has been put into practicethrough two larger projects.The first project was carried out at De Pasquale, advertising agency in Brisbane, where a corporateidentity program was designed for a new company. The company is a fitness centre, called KnockoutFitness, which specializes in different types of boxing training sessions such as Boxing, Thai Bow andBoxercise but also Aqua aerobics.

Statistics Sweden is an administrative agency that delimits built-up areas and produces statistics regarding them. The statistics provide information about the area of the built-up areas, their population number, number of gainfully employees working in the built-up areas, and of buildings. Now Statistics Sweden wishes to extend such statistics by producing a measure regarding how well developed the service is in each built-up area.This study is a contribution to this statistical improvement work and the purpose is to ? by employing geographical information systems and cluster analysis ? classify the Swedish built-up areas according to 1) service width and 2) service degree. A particular built-up area has a high service width if it has many different service functions, such as pharmacies, schools and grocery stores.

This Degree project has been carried out in cooperation with Enertech AB in Ljungby and is pilot study to automating all current manual soldering. The soldering process accounts for a large part of the processing cost in the production of a heat pump. The process is also a quality risk and has a major impact on the lifetime of the final product.The Main task of this project has been to evaluate automation of the soldering process, to develop automation solutions and a principle layout, to draw the design changes required for the automation and to calculate the supposed solution.This pilot study has resulted in a suggested automation solution using laser as a heat source for soldering. Calculations of the solution show that a automating a laser soldering cell is very profitable..