This study is predominantly qualitative. It is also descriptive to a large extent and notoriented towards hypothesis-testing. The study aims at studying what has influenceddigitization of old Swedish dramatical works through the Dramawebben projekt, whilefocusing on the technical solutions. Four different data collection methods have been applied.Interviews and a questionaire with open-ended questions were the two primary tools. Adocument analysis and observations were applied as well.Examples from earlier research to relate to questions about digitization as an institutional andsocietal practice are presented.

The vision of this thesis was to create a concept that can be used as a base for amachine construction. The purpose of this project was to use different methods todevelop a concept that on the best way meets the sat up requirements. This projecthas been divided into three stages/parts; principle, primary and the final solutionstage.This thesis has been conducted in collaboration with Västkustägg AB. It is aconstruction project designed to construct a machine that will automatically putlabels on the egg packages. Västkust AB wanted to automate this process.

At the Division of Electricity at UppsalaUniversitythere are ongoing researches, including a research concerning turbo generators.Turbo generators produce a large share of electricity in the world; however they are costly mainly due to the fact that the cooling and ventilation that are needed to eliminate the excess heat from the generators are expensive. Turbo generators work with high efficiency and in this project, the main task is to simulate a generator while taking into account that the generator must be designed against self-oscillation, centrifugal force, exhaustion and heat. The turbo generator must be simulated without being too expensive and complicated.In this project, the dimensions of the turbo generator depend on the efficiency of it, and where the losses are in the generator. Furthermore, the optimum values need to be chosen with the help of the ACE simulation program. The report begins with an introduction describing the project followed by a task description that is dealing with the project.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

This report presents a bachelor thesis by Erika Gustrén aimed to increase people?s interest for recycling and reusing by create new products of things that already exist in most people?s homes in the materials textile, plastic and paper. That would be a modern and innovative way to contribute to a better environment.The goal with this project was to create three cocktail dresses made of the same pattern and design and with the three chosen materials. The project did not have its base at a company, therefore an external mentor was chosen to help and support during the development of the project. My mentor was Kerstin Boulogner who is a fashion designer and one of the members of GKF (Gotländska Konsthantverkare och Formgivare) in Visby.The project began with an analysis of the chosen materials; textile, plastic and paper.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.

The purpose of this degree project is to study a work evaluation project in a municipality, on the basis of key participants. The municipality is the employer, per-forming the workplace project and the chief objective is to reach gender equality between the employees. Equal pay for equal work. Through work evaluation is it pos-sible to find out which of a lot of different jobs, which have equal requirements. The jobs, which have equal requirements, should have equal pay.

Department of Education, University of Stockholm. Second year research project, autumn term 2009. The transformation of Swedish officer´s training into an academic professional education ? a study of professional identity in alteration. The study is a part of the Research Project; Discussion for collaboration - from vocational training to academic professional education.By Michael LarmThe purpose of this study is to analyse in what way the process of transforming Swedish officer´s training into an academic professional education are perceived in terms of professional identity, alteration and synergies.

The purpose of this project was to invite a changed perception of active sitting, to introduce a more active way of sitting in office environments and destigmatize an active sitting posture such as straddling by giving active sitting products conscious aesthetics based on environment and positive associations. The goal with this project was an active sitting product for office environments with aesthetics considered encouraging to movement in a relaxed way, regardless of age and gender, and connect to materials and aesthetics related to activity, experience and recreation. Horseback riding, retro style surfing and skateboarding was an entry of investigation. The project was based on existing active sitting products, their function and production techniques. It was not a part of the project to investigate new models of sitting.

The debate in the media on a new Swedish sex education movie sparked our interest in this study. The twenty-eight minutes long movie ?Sex on the map? is the first of it?s kind in twenty-five years. It is also part of a bigger sex educational project that contains, apart from the movie, a book about sex education, a documentary and a teachers guide. The project is a co-production between the Swedish Educational Broadcasting Company (UR) and the Swedish Association for Sexuality Education (RFSU).We were interested in how teachers received information about the project, and what their attitudes were towards it.

In order to measure the quality of the logs, one can with help of Fast Fourier Transform technique get the signals resonance peaks. With help of these peaks you can see whether the quality of a tree is good or bad. This report contains the work of a where a program has been developed to be able to process a vibration created by an automatic hammer hitting on a log of wood. From the processed signal the program should be able to show both the raw wavesignal and the processed measured data from the resonance peaks. Beyond the raw wavesignal and resonance peaks the program should also be able to control the automatic hammer.