This project examined the possibility to create an electronical aid with the purpose of increasing environmental awareness and to design the aid in a fashion that inspires other to develop similar applications. The impact of car traffic was examined, and the base of the aid was built up in modular form to simplify the hardware aspect. For the active, data processing part of the aid the Arduino platform was chosen because of its simplicity and big possibilities of help in different internet fora, for those who choose to create similar applications in the future. The main part of the project var the use of real-time information from the car?s on board diagnostics.

The object of this examination project is to produce a method of work sampling at Rapid Granulator AB. The aim is to perform the method at the company and evaluate if it is executable. The study is delimited to the basic construction of the 45-series in the assembly hall.Preparations to produce the method of the work sampling resulted in definitions of activities, a form and a product tree. Several days were spent studying the assembling to learn and understand the entirety.The work sampling result showed a large amount of no value adding time that was used in the assembling. Some of the activities could be reduced and we observed some problems during the assembly process.

This report discusses the constructionof different types of exterior wallconstructions and analyses wall layers.Standard wall constructions from theSwedish building contractors NCC andSkanska and also from the materialproducer Isover have been chosen for theresearch. Life cycle cost analysis hasbeen made to conclude the mostprofitable wall type, seen from asustainable and economic perspective.The calculations have been made for aperiod of 50 years.The report shows that building with wellinsulated walls is a more profitablesolution both economically and whatconcerns sustainability even though thehigher investment. However, when wallssimilar insulation properties are beingcompared, the study proves that lowerinvestment cost is more profitable.The report introduces requiredconstruction techniques of walls inorder that the reader should understandwall constructions with different layersand properties. The essay shows theimportance of properly constructed wallsto avoid air leakage and moisturedamage.The essay has been implemented byliterature studies, contacts with NCCand Skanska and by energy calculationsmade by hand and using the software VIPEnergy..

Inom sjukvården används ? precis som överallt där människor sover ? sängkläder av hygienskäl. Problem med smittspridningar av typen multiresistenta bakterier (MRSA) och spridning av andra sjukdomar har drivit företag som Cellcomb i Karlstad AB till att utveckla engångssängkläder för att förhindra detta. Engångssängkläderna är skyddade av en biofilm som ska ge ökat skydd mot bakterier och fungerar som en barriär så att inte vätska tränger igenom. Problemet är att det inte finns mycket till underlag för hur engångssängkläderna står sig mot vanliga sängkläder ur miljösynpunkt.

The ?peer to peer? (P2P) is a technology of downloading and filesharing between online - Internet - users by the mean of specified software. Since June 1999, the Napster software has made the happiness of millions of individuals who used it to obtain and share free audio files Mp3. Rapidly, the major recording companies have prosecuted the Napster Company and managed to force it to close down. They were arguing against it for it is supporting the development on a large scale traffic of files protected by copyright and thus was threatening the whole music and movies economic world.

This thesis examines how a company can get an effective, high quality, maintenance of their computerized systems. After literary studies concerning the life cycle activity Maintenance we have studied how the maintenance at the department IT Supply of IKEA IT AB in Älmhult is carried out. What steps and measures in the analyzing of results of changes are carried out and if they have predefined processes for changes. Based on the facts we found most important in our literary studies we have created a model and theoretically applied this to the maintenance of a specific system to see what they can work with to further improve the quality and efficiency in their maintenance. The basis for our thesis is literary studies and the collected material has been used as a foundation for the research at the company, which was carried out through interviews. This thesis is based on the question: ?How do the lack of a model for maintenance and the lack of orientation affect the maintenance in a company??.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

This thesis considers the use of an oldrock cavern as thermal energy storage.With a large system of differentchillers a model was created to find anappropriate future system. There aremainly two trajectories to take. Eitheran installation of chillers needs to bemade or the rock cavern can be used tomeet the future demand of districtcooling in Solna, Sweden. Additionallythis thesis investigates the possibleuse of different techniques to utilizethe phase change energy of water.Simulation shows that it?s possible toutilize the phase-change energy of afluid; however it?s not economicallyfeasible due to the thermodynamiceffects on the Carnot cycle.

En körsimulator är en modellkonstruktion som ska efterlikna ett verkligt fordon. Den körsimulator som finns vid Statens väg- och transportforskningsinstitut, VTI, bygger på en riktig fordonskaross och ett avancerat rörelsesystem. Omgivningen simuleras och visas för föraren på tre skärmar. I dagsläget finns ingen modell för generering och simulering av trafik till VTIs körsimulator. Syftet med detta examensarbete var att ta fram en sådan modell.En del av examensarbetet var att undersöka förekomsten av modeller för generering och simulering av trafik till körsimulatorer i världen.

This work is about presenting the weave in a new and different context, by bringing textile and glass together. The work is characterized by material and shape experiments with silver and copper weave and hand blown glass. From experiments and sketches, the work has resulted in four sculptures, symbolizing four selected stages in a lifecycle; the birth, the development, the maturity and the death. One important part of the work has been to combine different materials and techniques.Studies of literature, sketching, handweaving and integration of silver and copper weave in the glass have been important methods in the working process. Inspired by the flower, the human being and the universe, a story about the life cycle has taken shape.The paper describes the working process with choices and analyses.

In modern society in terms of economics and environmental impact, it is important to ensure that a company is as energy efficient as possible to reduce the amount of energy used. About 10 TWh of electricity used annually to pump drives in Swedish industry. Therefore, pumping system has great potential for energy savings.The objective of this report was to determine how much energy and money that can be saved with the insertion of variable speed drive to six pumps on Bleach plant 4 in Skutskär Mill. The work was performed with electrical measurements during one week, analysis of pump curves and the compilation of production data over a year.The results show that four of these six pumps were profitable and yielded an annual saving of 1172 MWh of electricity and 560 000 SEK. With an economic lifetime of 10 years and a discount rate of 6.8% the final result for the entire life-cycle savings became 3 355 000 SEK.

In this report the situation for cyclists on 2+1-roads is analysed and studied. Theseroads are often the old 13-meter roads that have been changed into 2+1 to increasethe security. Two road sections outside Motala in Sweden has been deep studiedand analysed. The different parts in the planning process show how the progressgoes. To begin with the change should be within the old 13 meters but after thepilot study was circulated for comments the result became a broadening to 13,75and 14,00 meters.

The European bison is a species which is no longer present in the wild fauna of Sweden. Reintroduction has been proposed in several different forums. Reintroduction is an attempt to reestablish a viable population of a species in an area to which it is native. To make such an operation successful in the long run it is essential to know the attitudes of the stakeholders involved. This study has sensed the attitudes towards reintroduction of European bison to Sweden.

Man?s impact on the environment is something that increasingly becomes topical in today?s society. Because of this, several companies have started to take interest in the effects they?re responsible for, not least considering their image. Emissions of carbon dioxide generated from goods traffic are accountable for a large part of the total emissions of greenhouse gases in the world.

The life cycle of the anadromous Atlantic salmon (Salmo salar) can span large geographic, political, and socio-economic boundaries. Management strategies and regulations that only concentrate on small spatial scales often overlook larger basin-wide problems, especially relating to post-spawn seaward migration. In this master thesis one entire migration cycle of wild adult Atlantic salmon in the unregulated northern Swedish river Vindelälven was monitored by radio-telemetry tracking during upstream spawning migration and downstream seaward migration back to the Baltic Sea. The effect of ladder passage variables (time to pass, total time in the ladder, passage day over the ladder) at a fish ladder downstream in the river Umeälven, as well as fish size, were evaluated to determine if differences in upstream migration distance in the river Vindelälven could be observed. Ladder passage variables did not affect migration distance, but size exhibited a negative relationship to migration distance.