GPS (Global Positioning system) and GIS (Geographical information system) has been used for planning and inventory in the forest sector for more than ten years. The last years the development has come to equip harvesters and forwarders with GPS and GIS (GIT). The goal with this study was to reach a basis for decision, how Stora Enso Skog should continue its investment in GPS and GIS in harvesters and forwarders. To reach this basis for decision, possible advantages and benefits, disadvantages and problems in the harvesting process was evaluated. The study was made as an interview study with four harvesting managers and ten machine teams. To secure the quality of the results an interview questionnaire was made before the interviews were done. The results showed that GIT will make the harvesting managers work easier.

Det råder bostadsbrist i Stockholm, en lösning är att bygga nya bostäder. En annan lösning är att nyttja befintliga byggnader som inte används som bostäder, genom att bygga om kontor- och industrilokaler till bostäder. Det som händer är att industriområden flyttas längre ut från de attraktiva bostadsområdena. Ombyggnationer av byggnader med olika lokalkategorier kräver omfattande bearbetning och samarbete mellan flera aktörer såsom stadsplanerare, byggherrar, arkitekter, konstruktörer med flera. Det finns många aspekter att ta hänsyn till vid ombyggnationsprojekt och vårt mål är att belysa några av dessa.Den här rapporten studerar först och främst konstruktörens roll, vad en konstruktör ska tänka på vid en ombyggnation.

Internet commerce is nowadays a well known phenomenon. There is awareness that a lot of newly created companies operate their business through the Internet. You can see a tendency where many young people try to establish an Internet business with the hope of success and expansion on today?s fierce market rivalry. To achieve success, companies have to consider factors like business concept, logistic knowledge, future vision, resources and contacts when initializing their business.Having this in mind, we can clarify the purpose with this paper: ?To analyze in what way On-line shopping companies that sell consumer electronics, cell phones and music/entertainment products, have expanded? The paper is based on telephone interviews with three On-line shopping companies.

Det traditionella svenska skogsbruket bygger på ett trakthyggesbruk som tillämpas på största delen av arealen. Generell hänsyn lämnas vid skogliga åtgärder i form av levande och döda träd samt orörda områden. Utöver detta lämnas hela bestånd och nyckelbiotoper. Denna modell har fått kritik för att den skapar ett fragmenterat och variationsfattigt landskap med dåliga förutsättningar för många skogslevande arter att reproducera och sprida sig. Ett alternativ är triadskogsbruk där arealen delas upp i zoner med olika mål.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

The main objective of this thesis was to develop appropriate strategies and find factors that affect the usability of parameterized designs. This was accomplished by investigate the user-interface and how it is designed to meet the user's information needs. The thesis also embraces the basic theories in terms of investigation, cognitive design principles and human behavior patterns in the interaction with the machine. The approach has led to an explorative investigation in this subject area.The thesis also had the purpose to achieve more efficient ways for development of motor chainsaws at Husqvarna AB's department Global Cutting Equipment. That can be achieved through reduce costs of development per sold unit.

Long transport of products is an environmental issue discussed to an increasing extent. The consumers are increasingly aware of how far our comestibles really have been transported. The increasing levels of environmental emissions are something that concerns people. The question is nevertheless delicate and many choose to ignore it. This is no longer an option.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

Industrial buildings are increasing all over Sweden. Farmers are building new modern facilities and the government chooses to build new halls to invest i youth sports. Glulam is the most common framework but there are limitations because of the transport. Therefore, there is a need to develop new solutions to increase the use of glulam.The maximum torque in the eaves was found in the frame with a roof pitch of 18 degrees and a wingspan of 25 meters. Using hand calculations according to Eurocode and comparison with the computer software StatCon, the maximum torque, shear force and utilization rate is calculated.

Objekt för undersökningen är en nyplantering av bok på en mindreskogsfastighet i sydöstra Blekinge. Bok och ek, som är de viktigaste ädlalövträden för den biologiska mångfalden, intog i dessa trakter en stor andel avskogsbeståndet fram till 1960-70-talet, men har sedan minskat i takt med attde ersatts av planterad gran. Det finns idag, bland annat i Skogsstyrelsensriktlinjer, en uttalad strävan mot en högre andel ädellövskog på debreddgrader som ingår i dessa trädslags naturliga utbredningsområden. På såsätt kan det projekt, som studien beskriver, anses ligga rätt i tiden.Inledningsvis ger rapporten en översikt över skog och skogsbruk somkunskapsområde och bakgrunden till att vi nu ser tendenser till att detraditionella formerna av skogsbruk, där ekonomi är den dominerandestyrfaktorn, börjar ge vika för skogsbruksmetoder som gynnar ävennaturvårds- och sociala värden. Detta är en tendens som nu börjar fågenomslag såväl i myndigheters styrdokument som i forskning ochkunskapsutveckling.I rapporten beskrivs utvecklingen av en tio-årig plantering av bok, delsresultatet av den första fasen, etableringsfasen, och dels en bedömning av hurden framtida planeringen kan göras utifrån de uppställda målen med fokus påde skötselformer som kan betecknas som ?hyggesfria? eller ?naturnära?metoder.I analysen av studiens resultat görs jämförelser dels med liknande studier ochdels med schabloniserade tillväxtprognoser för bok.

In the 1970´s the North American lodgepole pine (Pinus contorta) was introduced to Sweden in large scale. The lodgepole pine affects its new environment different from Scots pine (P. sylvestris), leading to a change in biological diversity. Forestry today affects the ground beetle fauna (Carabidae). Habitat specialists associated with older forests are first affected. When the canopy closes again after a clear-Cutting species that prefer open habitats reduces and those who prefer mature/closed forests increase. In this study we compare differences in diversity and community structure of ground beetles in stands of lodgepole pine and Scots pine.

This master thesis investigates quality procedures and measuring of solid carbide end mills, with the main focus on measuring equipment. The thesis has been written in collaboration with a special production department for solid carbide end mills at Sandvik Coromant in Gimo. The department?s needs and constraints have been the foundation of the project and the main research question is: how to measure end mills in order to ensure good quality of the produced end mills. The project has contained both a theoretical study consisting of a literature review and practical studies in the workshop with the objective to identify an end mill?s main parameters and the relationship between an end mill?s geometry and the manufacturing processes.

I?ve tried to find the most effective and cost effective way to harvest straw for energy recovery.You can choose between round bales and big square bales. Square bales are the cheapest way to produce straw for fuel recovery because you can optimize the length of the bales so they fit the transportation equipment.In the Malmö area the average days of harvesting hay is 55. The effectively of transportation depends mostly of the speed, the distance and density of the bales. To increase the capacity of bale transportation larger loads and higher density of the bales is necessary.

In Sweden, harvesting pre-commercial thinning (PCT) stems for energy purposes is a interesting way of financing the high cost of preparing dense stands for a profitable first conventional thinning. This concept can be labelled bioenergy thinning. The aim of this study was to quantify the productivity of a Vimek 404R light harvester with an accumulating Naarva-Grip Cutting head during the bioenergy thinning of a self-regenerated stand west of Sunnansjö in Dalarna. The stand was birch-dominated, contained 15 371 stems/ha, and measured on average 4,6 cm Dbh and 7 m tall. Even though the driver was well experienced with the machine, the stand in question was the first one that he ever thinned in this manner. Nevertheless, the driver strived to accumulate as many stems as possible during each crane cycle and chose to cut taller stems in half so as to make the handling and forwarding of the harvested stems easier.