This thesis has been performed as a part of the Bachelor degree in Industrial Engineering and Management at the School of Engineering in Jönköping. The thesis is written on behalf of Pallco AB, which is an engineering company that performs subcontracting, surface treatment, and assembly of components, mainly in steel and aluminium. The thesis focuses on identifying and analyzing the Customer order fulfillment process of three customers at Pallco AB.The main objective of the thesis is to distinguish time differences in the company?s administrative work for each of the three customers. Furthermore, Lean thinking is following as a thread through the whole thesis.

Sandvik Wire needed a review of the administrative part of the order fulfillment process and especially the work around packing and the inventory of finished goods. Therefore we acquired the assignment to investigate the administrative part of the order fulfillment process in the company with the purpose to identify potential for improvement. This investigation was performed with focus on the terminal and packing functions. The purpose with the investigation was also to identify critical factors for an efficient order fulfillment process and investigate if information quality is such a factor.Data was collected through interviews and observations on Sandvik Wire. With the help of this data the information and material flows was mapped, the work within terminal and packing, and adjacent functions was investigated.

The goal of customer support is to help clients achieve maximum value in their services and products. Customer support is the public face of a company, which means that it is important to give the customer a positive experience and live up to customer expectations. Efficient customer support has become more important and studies show that customers who leave a company do so because of poor service. Customers' growing demands for higher quality and easier access to services means that companies must recognize the need to satisfy each customer. It is important that each customer receives the attention required and that customer needs are met quickly and flawlessly.

The purpose of this paper has been to describe the project manager's experience of the customer relationship in customer order projects. A qualitative interview study has been conducted in which seven project managers were interviewed. A thematic analysis resulted in four overall themes. The results showed the importance of a clear, responsive and open communication as well as a large degree of customization to meet the customer the best way as possible. The experience was also characterized by a dynamic relationship and the importance of the customer's expectations.

Sweden is going through big changes within the bank sector. Increasing card usage, decrease of cash acceptance in the society, an attempt to reduce money laundering, and a possible increase in profitability has lead to the rescindment of cash management among three of the four major banks. This has lead to a big debate in the society, a lot of frustration from customers, and a drop in customer satisfaction for every bank that started the process of removing cash management. The purpose of this study is to find out how the banks could keep their customer satisfaction when removing cash management. When doing the study, the rescindment of cash was a deduction of a part of the service, compared to the normal adding or starting of a service. The study was done through a focus group that was the base of a questionnaire that got answered by 125 respondents.

This paper examines the customer relationships of a telecom operator and how their customer accounting is done. The aim is to use the framework developed by Lind & Strömsten (2006) to categorize customer relationships and see to what extent the framework predicts which type of customer accounting method is used for each customer relationship. A case study was made at Telenor Sverige AB where different customer relationships are identified and linked to the customer accounting techniques that are used for financial measurement of the customers. Findings include that all but one of the customer relationships described in the framework were recognized at Telenor and that most customer accounting techniques mentioned in the framework were in fact used and associated with different customer relationships. The results of the case study also highlight that some differences exist between the predictions of the framework and the observations at Telenor..

The aim of this thesis is to describe how service companies through adjustment of the customer?s zone of tolerance can influence customer?s perception of the service during the processes of service delivery and create customer satisfaction. The method used was case study approach utilizing personal interviews, which were conducted at two service companies. The study showed that the aspects of the service that have greatest importance for the customer?s assessment of the service and customer satisfaction among others are personal treatment and that personel behave in the way that makes the customer feel itself taken good care of and unique.

New innovation and technology have influenced the development of product development processes and the four largest banks in Sweden have more or less been forced to adapt their products and services along new customer requirements. It may therefore be considered appropriate to involve customers in this process. This by collecting customer information and allow customers to influence the process to a greater extent. The payment solutions of Sweden?s largest banks' continue to evolve and to pay with electronic money has come to change banks' product development processes of payment solutions.

The purpose of this report is to come up with possible improvement suggestions to the distribution central at Götene Stål & Verktygs AB (GSV). GSV is a wholesale dealer located in Götene. The company doesn?t produce anything it self, it buys in products and sells them to customers.The distribution central at GSV is the place where the products comes in and gets ready to deliver.To come up with possible improvement suggestions we started with process mapping over the main process and the distribution centre process. The main process here is from the point where the customer gives GSV an order to the point where GSV deliver the order.Our result shows that the major problem in the distribution central at GSV is the big volume differences in the incoming goods.

The purpose of this thesis was to examine how the build-up of customer relations can be characterized at the end of the industrial selling process and how companies engage their cross-functional selling teams into this relationship building effort. Through a case study of Omega, a multinational company engaged in the selling of products of an industrial character, it was revealed that the build-up and maintaining of the customer relationship is of acute importance, as it presents the company with a window of opportunities. Through its relationship with the customer the company can be able to sell other products, which are related to the original purchase made by the customer. For the company?s competitors the established relationship might also serve as a barrier when attempting to enter the market or increase market share.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

In relation to the development of IT-products it is very important that the software supplier is aware not only of the target group but also the field of application. Usability should characterize the whole IT-design process as, in relation to this context, design includes more than merely those aspects which are visible to and thus can be interpreted by the naked eye. The study examines the specific qualities and properties that substantiate the usability and the demands that a customer rightfully expects from an IT-product. The user and the customer are highlighted in the same context in order to demonstrate that it is through the customer that an IT-product is defined as being useful. Thus, from this perspective, the user and customer can be considered as being the same person.

This Master Thesis is a part of PlymoVent?s business to customer plot, with the aim to investigate how the consumers receive the services that PlymoVent provides. With regard to PlymoVent's business strategy and reference theory, the demands of how to receive and monitor a supply chain for a better customer satisfaction where targeted. The findings refer to poor customer satisfaction due to obscure procedures in problem resolution and discrepancy handling, and vague transportation accuracy..

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

The purpose of this thesis is to describe and analyze how the mining equipment producers on a global market manage to handle the changing conditions concerning customer value. Our approach has been a comparative analysis between two different sites in order to answer the purpose. The case studies at Metso Mining have been made through interviews and visits at two geographical markets, South America and Scandinavia. The theoretical framework applied on our empirical findings is based on Blue Ocean Strategy, Customer Value and Resourced Based View. The empirical foundation is based on interviews with Metso Mining employees at Sorocaba in Brazil and Kiruna/Gällivare, Trelleborg and Staffanstorp in Sweden.