This report summarizes a Bachelor Degree Project in Integrated Product Development,carried out during the spring semester in 2007 by three students at the Product Design Engineering programme at the University of Skövde. The project was performed as an assignment for KinBag ab, a sister subsidiary to Kinnegrip ab in Lidköping, who develop,manufacture and market the golf bag KinBag, a bag with an integrated wheel carriage system. The purpose of the project was to redesign the golf bag to attract a target group consisting of golfers aged between 20 and 40.The layout of the project was as follows: The project began with a feasibility study where different problems were identified with the basis of a market research which eventually was summarized in a dynamic specification of requirements. The feasibility study was followed by a generation of ideas which contained everything from sketches to simple mock-ups with an intensive amount of thoughtful brainwork and information gathering in between. This ledto the development of a number of design concepts, both on an overall level and on different parts of the golf bag.

Syfte: Syftet med uppsatsen är att undersöka hur en entreprenör/ kreatör produktplacerar i bästa mån för att överleva i modebranschen. Metod: Kvalitativ med intervjuer som bas för empirin. Slutsats: Med hjälp av en positioneringsmodell kan entreprenören/kreatören ta ställning till sina konkurrenter och placera sin produkt till den tänkta målgruppen. Teorin hjälper företagare att strukturera upp en annars komplex hantering som i nystartade företag ?bara sker?.

The main aim of this master thesis was to see the process of an interactive online reference service from idea to final product. The reference service we have studied is developed and used by the Library of the National Institute for Working Life in Stockholm, Sweden and goes by the name phibi. Our goal was to review the whole realization process from the reasons why a service like this was created, how the service was introduced and implemented inside the organisation and finally what the result and consequences were for both the library staff and for the users of the service. Phibi is designed to be a tool that fosters communication between the library staff and the remote users where the users get the opportunity to be helped with their questions by the library staff although they are not physically present in the library. To understand the process we conducted a case study with 11 interviews of the library staff, the superior and the initiator to phibi.

Problem discussion: How should information be handled to facilitate and benefit from modularity? How should Clarkson Inc. adapt their information handling to modularity and what benefits can be reaped by doing this? Purpose: The purpose of this master thesis is to help Clarkson Inc. adapt their information handling to modularity and to extract theories, methods and tools to guide companies in similar situations.

I have together with Frimeko AB developed new hallway furniture for preschools. The background to the project is the fact that all the existing hallway furniture?s on the market today have a similar design and same features. None of the furniture stands out immediately. Companies who work with school furniture in general have been inspired by each other, and therefore is the collections monotonous.

This thesis is carried out on behalf of watermixer manufacturer Ostnor AB in Mora.The thesis deals with the area of Article Bound Instructions (ABI) at the company'sassembly department, regarding the layout and management routines involved withthese instructions.In the current situation there are problems with no uniformity in the manner in whichthe ABI is written, then referred to both the civil structure, images and specificityrates in the text.Another problem is that operators do not make use of the ABI that are available inthe current situation, and that there are no clear procedures for who has theresponsibility to write, update and change these ABI.During this work has several people that were identified as key personnel of thethesis held in order to get a handle on how the current situation of the variousobjects of the work looks like, and to examine different desires about the future ofthese should look like from the different subjects perspectives been interviewed.During the work, a number of deficiencies, including that the current program that isused to write the ABI, Lotus Notes, do not possess near the prerequisites for being asimple program to deal with when writing the ABI, which is a condition since wishesare about to put the responsibility for the ABI generation to the departmentsoperators, since their main task is to assemble and do not bother with a program in acomputer.The result of this work has generated new layout and structure of the ABI, designedto be used continuously in the assembly for evaluation, routines regardingresponsibility of the ABI for the Department of Production Engineering (PT),procedures for how the ABI should be written regarding amount of detaileddescriptions in the text and use of pictures.In addition, proposals for further work and improvements has been developed basedon experience during the work and presented at the end of the report..

This Master of Science thesis is conducted at the faculty Integrated Product Development at theRoyal Institute of Technology and in cooperation with EssNet Interactive AB, both situated inStockholm. In the report the final results and the road to get there is described as well as thedesign process and how the process is used to obtain the goal of this thesis.The author of this thesis has developed the design and the function of an interactive videoterminal (IVT) and by using semantics created an encouraging gaming design. The projectspurpose was to change the anonymous withheld shape and produce an experience of gamingmachine that has been absent. The work was aimed to answer the question: How does oneproceed to develop the IVT and by using semantics creating an understanding of gamingmachine?In general the author wants to show that small changes, with the help of design and its signals,can completely change the overall picture of a product.

Syfte: Syftet är att beskriva och analysera framväxten av nya kommersiella etiska konsumtionsfenomen och dess påverkan på konsumentkulturen. Metod: Magisteruppsatsen bygger på en kvalitativ litteraturstudie som kompletterats med en empirisk case-studie av fenomenet (PRODUCT) RED. Allt emiriskt material är inhämtat från Internet under olika tidpunkter från och med mars månad till mitten av maj 2008. Empirin grundar sig bland annat i diskussioner vilka bedrivits på sociala nätverk på Internet och där främst inom grupper på Facebook. Materialet sträcker sig tillbaka till (PRODUCT) RED etableringen i mars 2006, vilket innebär att urval av inlägg och bloggar från olika diskussionsforum inhämtats under hela denna tidsperiod.

There are several Project Management Softwares onthe market today. These tools are powerful andextensive to the degree they become too timeconsumingand complex and therefore often defeatits original purpose. This is the case especiallywhen the project manager is inexperienced and/orthe scope of the project is moderate.The purpose of this thesis arose from this context,there seems to be a gap between a home-made MSExcel spread sheet and the advanced softwaresavailable. The thesis and the product has beendeveloped in alliance with Faveo ProjectManagement with the shared goal to create a toolwhich is easy to use but still covers the essentialareas of project management theory. The tool willbe used internally by Faveo-employees as well asexternally together with Faveo?s clients in aneducational purpose.

The environmental debate is more intensive than ever before and the demands on companies increase. There are a number of methods to make it easier for the companies to fulfil the demands. Life Cycle Assessment (LCA) end ecodesign are some of the methods that can be used. Syntronic AB has the possibility to reduce the products´ environmental impact in the design phase. Therefore it is important for the company to make it possible to visualize the negative environmental impacts a product can cause in an easy way. It is also important to visualize for there clients if any improvement is possible. The purpose of this thesis is to develop a simplified model.

The parallel bars is used in physical therapy and is mainly used for patients who have to train walking and balance after a stroke or an operation. It consists of two long handrails with two legs on each handrail. These legs go down into two ground-plates and are locked at the wanted height with a pin. The parallel bars is an appreciated device and is used on a daily basis in many care units.The main issue with the manual parallel bars is that it is very difficult and heavy for a single person to adjust the height of it. If a larger adjustment of the height has to be done, the legs have to be adjusted one at a time otherwise the they will be locked.

The object of this master thesis was to examine the significance of fairy tales for children and the extent which children today are able to share fairy tales through the activity of the libraries. The main question was: how current were fairy tales at the investigated libraries activity for children and how current were fairy tales in todays book publication? The qualitative methods used were in the form of interviews, statistics and source studies. The theoretical literature in this thesis described the folkloristic context of the fairy tales. There was also a psychological and a pedagogical view of the possibility of the fairy tales.

This thesis is about developing a design that provides improved vacuum seal between a lead coating and a plastic coating during plastic extrusion processes of cables. This report is a part of the course MSGC 17 for Bachelor Engineers in mechanical engineering.The work is performed at Nexans Norway AS in Halden where they have a production of high voltage cables for sea-, and offshore industry. A problem they face is that they do not get enough good seal at the attachment to the plastic extrusion machine. They want to achieve a vacuum between a lead coating on the cable and a plastic coating of the cable for plastic extrusion, which is something they do not achieve today. The thesis is thus to come up with a design that provides better sealing against the cable.The work involves a construction part with the phases of product development processes.

The Master Thesis has been carried out in cooperation with Silva Sweden AB and the objective was to develop a new product concept within the product category for everyday exercise. The purpose of the thesis was to use and analyze methods and tools which aid creativity and concept creation in order to make method recommendations for future projects.During the thesis a number of customer needs were identified, which in turn were translated into 20 concepts. On a concept decision meeting a pedometer-based concept was chosen for development. The new pedometer is in addition to counting steps also able to measure and calculate the user?s total climbed height during a day and present this graphically in comparison to famous monuments or distances.

This report presents a master thesis project performed at Elekta AB during the fall of 2013 and early 2014. Elekta is a medical technology company and their main product in the Stockholm office is a gamma knife used for radiosurgery. The gamma knife contains a cluster of a dozen motor servos and motors used for adjusting the patient and the radiation sources over a CAN bus. A self-developed hardware-in-loop simulator running on a PC with LabVIEW is currently being used for integration level testing of the control system of the gamma knife. The simulator has some problems with it not running in real-time and having other performance issues.