This thesis investigated the possibilities to resume cultivation of an old manor house built of timber and what this would mean from an energy and moisture perspective. The building in this case study is named Sofiedals mansion and was built in 1858 in Valbo 11 kilometers west of Gävle.The structure of the house was documented and used as a starting-point for carrying out calculations focused on energy and moisture aspects. With the help of a number of computer programs and a conducted air tightness test, the buildings energy consumption were calculated and compared with the current building regulations.In addition, the building was analyzed considering energy retrofitting and what it meant for moisture problems. The energy retrofitting consisted of additional insulation, decreasing the buildings permeability through air sealing; window and door replacements. When a building is equipped with natural ventilation it is difficult to know its precise performance and how an energy retrofitting affects it.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

Humanity has always dreamed about a better world. These dreams has manifested themselves in the vision of Utopia - the good place, but also the non-existing place. Up until World War II man still wrote optimistic descriptions of this ideal world, and spread the idea through literature. In the aftermath of the atomic bomb and under the influence of the cold war, these publications seized to surface in literary surroundings. Despite this utopia did not die - it has only changed.

We live in an exciting society, characterized by continuous changes and challenges. The effects of the globalization are widespread. The continuous flow of people, capital and goods follows in the wake of advances in communications, transport and information technology, resulting in a changed situation for different stakeholders in the society. This situation leads to increased cooperation and exchange, but also increased competition. The primary means of collecting empirical data for this study was interviews and a document study.

In 2003 the parties in Sweden were invited to debate reforms of the Constitution. The purpose of this essay is to study the debate concerning reforms of the Constitution and identify values expressed by the parties. Moreover the goal of the essay is to connect the identified values to the three democratic ideals, which are; electoral democracy, participation democracy and deliberation democracy. This analyze is based on the idea analyze.The conclusion is that all parties have argued that the Swedish Constitution should be based on the democratic ideal of electoral democracy. However, the right wing parties have also argued for inflection of participations democracy and deliberation democracy in the constitution.

The purpose of this study is to compare the contents, editorials and front covers of Sweden?s oldest girl?s magazine Veckorevyn during two different years, in which the magazine had two very different chief editors.In the year 2000, Emma Hamberg got the job as editor-in-chief for Veckorevyn, with a vision of changing the way the magazine represented young females. She wanted to add a more feminist viewpoint to the magazine, since she felt that Veckorevyn didn?t live up to its claim of being ?a girl?s best friend?. Six years later, the famous Swedish fashion editor Ebba von Sydow became editor-in-chief for Veckorevyn, with the intention of making the magazine better, smarter and more fun for young girls.

Förord:Ämnet för mitt examensarbete var att arbeta med företagsidentitet genom att fläta samman ett specifikt företags (Löfstrands möbelrenoveringsverkstad) befintliga verksamhetsstruktur och ambition med planeringen och formgivningen av dess egenproducerade objekt.Löfstrands Verkstads vilja att skapa möbler som skall kunna ärvas vidare (likt de möbler de renovering i sin befintliga verksamhet) lades tillsammans med möjligheterna med småskalig produktion (i deras verkstad, samt kontaktnät) som grund till en verksamhetsbreddning för Löfstrands Verkstad i Hägersten.Den fysiskt manifesterade slutprodukten av examensarbetet är en möbelkollektion skapad för Löfstrands ideal, identitet, lager- och produktionsmöjligheter. En kollektion i vilken kunden bjuds in till medskapande (eller art directing) av möblerna för att knyta strarka band till dessa och verkstaden..

This report describes necessary steps for an implementation of an environmental managementsystem at a secondary school and what would hopefully lead to an environmentalcertification, using ISO14001 ? or as a possibility ? one of the so called environmentalawards. To the largest part, the descriptions and activities are general and can be used at anysecondary school at all, but the current status analysis ? with the started environmentalinvestigation ? and the environmental policy are directly coupled to Wilhelm HaglundsGymnasium. The document should work as a process support for implementation of anenvironmental management system at a secondary school..

It?s not a new occurrence that girls have higher grades than boys. Statistics show the same at the Kallinge school in Ronneby. There is a great difference between boys and girls in their grades from the ninth class. There are many different factors that affect the pupils.

The main point in this diploma work lies to a beginning on analysis of the existingmodel of WoodEye scanner. The analysis aims to forming a view and understanding ofhow the scanner is designed and how it functions, and certain conditions around thescanner. On the basis of the result from the analysis and obvious criteria, has a numberconcept proposals been put forward. The concept proposals has then been evaluated andbeen compared with current concept, obvious criteria and compared to each other. Thebest proposal has then been developed far to a completed concept..

The report is about efficiency of a current production group where there is no clear production flow and there are some buffers between the operations. The efficiency is done with the help of a tool that is calledWork process of flow production which is used by Atlas Copco CTO. The most obviously results are that the lead time drops from 25 hours to 425 minutes and that the balancing loss decreases from 85 % to 8 %. The report focus on decreasing transports, decreasing buffers, more reliability in lead time and quality. And a more stimulating labour content for the workers is another result..

This report is the result of a thesis carried out at the Department of Innovation, Design and Technology (IDT), at Mälardalen University on behalf of ABB AB Machines.The year was 1988 when ASEA and Brown Boveri formed a joint venture under the name ABB (Asea Brown Boveri).We perform our thesis at the division Discrete Automation and Motion where they primarily develops, manufactures and sells synchronous and asynchronous AC motors and generators.The main purpose of this thesis was initially to write a general packaging instruction, but the priority changed to develop more specific packaging instructions for Rotors, Stator gables, Bearing support and Outer Cover (plates) instead.The work started off to deal with a problem about that the staff had to start its work to grind away rust on the stator gables due to those stored outdoors. The result was mainly an investment in a new gable rack so that the material can be stored inside, as well as a packing instruction as it was originally intended.The problem on the bearing supports were that the staff thought it was demanding and difficult to clean them from the rustproofing they were greased in. If it is not possible to remove all rust protection it can cause the paint to not attach properly. After having compared with similar articles a test were done to order a pair of bearing supports without corrosion inhibitor, which gave good results. This initiative also set in motion a process to do the same for more different items.For special pallet, a survey were made of the process with two different VSM and a calculation of how much ABB would earn at ordering more special pallets than getting the material delivered on the A-pallets.

The energy use in a workshop company has been examined in this work in order to find areas for energy efficiency improvement. The combined oil and electricity heating in the company were compared with other alternative heating systems including cooling of the premises in following combinations:Ground source heat pump for heating and coolingDistrict heating and absorption coolingDistrict heating and low temperate surface water coolingEnergy use, operation costs and carbon dioxide emissions were calculated for the current heating systems and the three alternatives including cooling. The ground source heat pump for heating and cooling decreases bought energy with 34 MWh annually compared to current heating only. The district heating and low temperate surface water cooling has the largest reduction of operation cost and carbon dioxide. The operation cost decreases with 42 kSEK and the carbon dioxide with 43 metric ton CO2 annually.

In this thesis, a case study of Kungens Kurva in Stockholm is made. The municipality of Huddinge has designated the area, which is an external shopping-center, as one of its key development areas in the future. The municipality has established a future vision for the area, which extends until 2030. The vision claims, inter alia, that Kungens Kurva along with Skärholmen will become a vibrant suburb. How well the values and aims of the vision are met in the current area situation is discussed in the case study by a number of analysis that carries out the existing structures and characters of the area.

One of the most well-known trials in history is the one in Nürnberg, Germany, soon after the end of World War II. It is understandable that this caused a lot of discussions and that it was a world known trial which set the standards for a lot of similar occasions later on. The aim of this research is to focus on the opinions about this trial from a perspective of well-known Swedish newspapers. The method is to analyse three big papers with different political views and to see what separated them and what maybe united them. By studying the master-pages of the newspapers a picture is given of how the contemporary time had an understanding for the trial reports, which we in our time have established as facts.