During the years of development in the 60s and 70s the need for new housing in Sweden arose. Sweden was going to be the most modern country in the world. This period has later been called ?the time of the big programmes?. One of the parts in this building of a welfare society was a large policy of building politics with few counterparts in history.

Problem: The main problem this thesis brings up is what impact factors like trust, commitment, communication between a company and its costumers and value can have on costumer satisfaction on the basis of a relationship perspective.Purpose: The purpose with this thesis is to describe the importance of factors that can have an impact on customer satisfaction on the basis of a relationship perspective. To do this the author has looked into a company called Q-steps and conducted an investigation on their costumers opinion of their relationship with the company.Method: An interview was held with Q-steps CEO Sören Levén as the basis of the thesis, as well as a questionnaire that was sent to the company?s existing costumers over the web.Theory: In the thesis the author uses a model that describes factors that can have an impact on costumer satisfaction on the basis of a relationship perspective. This model is based on theories within relationship building in service companies.Conclusion: To be able to develop good relationships to their customers and as a result of this increase the level of costumer satisfaction, Q-steps has to take different variables into consideration. The main focus in this matter should lay on the variables that to a great extent affect the level of costumer satisfaction.

The construction process which is used today while constructing residential buildings has for along time remained unchanged. Unfortunately the development process has gone away frombecoming industrialized and instead most of the work is done at the construction site. In thisrespect this is a worse alternative because the project outcome will be more expensive and theconstruction time will be longer. Skanska?s vision is to have a process which is more like the oneused in small residential buildings which is fully industrialized.The constructing process for residential building involves more parties and therefore it becomesmore complicated.

The latest thing in the area of environmental building today is energy-plus-house. The idea behind the energy-plus-house is to create a house that produces more energy than it consumes. To accomplish this, the house uses renewable energy, in this particular case solar energy. With the help from a proper construction and thoughtfully projected installations you can achieve a surplus of energy. The surplus energy can then be sold to the surrounding buildings and thereby conduce to a financial profit for the household.

The following article consists of two parts; one part is about house construction and the other is a specialization about radon. The house construction part describes how to project a house from start. It contains the conformation of the house, the installations needed, calculations considering the strength of the construction, energy calculation and what materials were chosen. Calculations considering the costs of building and operate the house has been carried out. The result showed that the house would cost approximately two million Swedish kroner to build and thirteen thousand kronor a year to operate.

A growing number of cities and municipalities in Sweden begin to work with city models in 3D. For the most part the models are used for visualizations of ongoing planning processes, but also for the analysis of noise, shadow studies and environmental disaster simulations.Gothenburg continues to develop the use of 3D maps in municipal operations and is demanding a way to create building elements (walls), which generates in 3D buildings, from roof constructions that are mapped from the primary map. A method has been investigated in the present study. The results are then presented as a 3D model of buildings, along with a terrain map that will facilitate the localization of the area. The created 3D buildings are then compared with roof-data from the primary map to see how well they harmonize with each other.

The main purpose of this thesis is to examine how the European Union through the Directorate- General (DG) of Education and Culture, are calling forth a constructed sense of European identity amongst the citizens of the Union.It is a discourse analysis, which can be described in twofold. Firstly, it is a mapping of the European discourse; i.e. how the European Union defines the identity it seeks to mobilise. Secondly, it examines whether or not there are similarities in the European discourse of identity and the traditional nation-building discourse of national identity.According to this thesis a European identity is articulated in cultural terms, whereby its members are said to share the same values and a common cultural heritage.To bring the people of Europe closer together and to deepen awareness of their "common" history, the European Union encourages all manner of meetings and exchange schemes between Europeans. Although its goal is to develop a feeling of belonging to a shared culture, the EU is also keen to preserve the specific aspects of Europe's many cultures.

Abstract This degree project examines how much carbon dioxide that emits during the construction phase of a road project. This is to make it possible to compare how the amount of carbon dioxide differentiates between traditional road construction and Swepave construction, which is PEAB?s alternative way to design roads. To make the comparison a calculation tool has been produced. To compare the amount of carbon dioxide emissions a reference project was needed.

This thesis has been carried out at the Building and Civil Engineering Programme at Chalmers University of Technology in cooperation with NCC Technology. The study aims to investigate the optimal design of a library of standardized structural solutions for in-house multi-family buildings and what benefits it brings. Today NCC use technology platforms to improve efficiency and simplify the construction process. The platforms provide the constructors guidelines on how construction details should look like, but the details are not complete. NCC Technology started in the spring of 2013 a project to investigate what benefits there are to create a library of standardized structural solutions for the constructors, with more detailed solutions than in the platforms.

Enköping?s Rugby Club has long lacked a bigger hall to gather their members in, where they can meet and socializes outside trainings and games. Thanks to Enköping?s municipality, The Swedish Inheritance Fund, Swedish Sports Confederation, sponsors and club members the clubhouse will be built out with additional 100 square meters.The project is planned in two phases of which phase one is the buildup of the new clubhouse and phase two is the renovation of the existing part. Phase one started with the first groundbreaking in December 2006 and was finished for the season 2007.

Purpose There are almost infinite numbers of ways to build dairy farms in Sweden. When building a new free stall barn you have the possibility to affect both working environment and animal welfare for many years to come. The construction costs are influenced by which type of barn that is built and what functions it contains, for example one can predict that automatic milking systems are more expensive to integrate than milking parlours. But what is the real cost of today for the construction of free stall barns with milking centres and how is it affected by construction methods and functions? Is the labour time influenced by the building costs? These are some of the questions this report will try to answer.

Virtual Design and Construction (VDC) is the definition for using BIM in the construction process to simulate and analyse the building. Resulting use of the technology will according to proponents lead to fewer construction errors, a better understanding between stakeholders for the construction project, less communication problems and a smoother construction process. Although BIM has according to researchers a big potential, few companies have succeeded in broad and continues implementation. The study aims to identify the factors affecting the implementation. More precisely identify what factors influencing the decision to adopt VDC and potential barriers in the diffusion process. The empirical findings are based on a case study of NCC Construction Sweden.

Journalists and communication managers are becoming more professional and to reach out to its stakeholders in society today, organizations must work strategically with communication, to enter the news. Many make use of press releases to provide journalists with information, hoping to influence what is published on the news. With a background in the medial change that occurs is the purpose of this study to elucidate and problematize which role press releases has for newsrooms and for organizations today and in the future. A qualitative interview study has been used, and communication managers from three organizations and journalists from three newsrooms has been interviewed. The study has been combined with a quantitative pilot study of selected press releases and articles from the selected organizations.

The purpose of this paper is to clarify and understand the difference between Brunius?, Zettervall's and Graebe's valueing of a historical building, the cathedral of Lund. Between 1833 and 1963 the cathedral of Lund went through three larger restorations. The character of the restorations however differs a lot between the three church architects, Brunius, Zettervall and Graebe. In a time of low interest for the Middle Ages and of many demolitions of churches in the countryside, Brunius stood out as a researcher and an enthusiast of that special time.

Uppsalahem AB is a municipally owned real estate concern that owns and administrates housing for nearly 30 000 people. The company puts a lot of effort into reducing the energy use of their housing stock. This project is a master?s thesis in the energy systems programme at Uppsala University, carried out in collaboration with Uppsalahem. The aim of this thesis is to provide energy saving measures for fourteen student housing buildings in Uppsala, Sweden.