This thesis deals with the numerical 3D simulation of a four stroke, spark-ignited, internalcombustion engine, which is mounted on a high performance motorcycle. The work, carried outin collaboration with Politecnico di Milano and MV Agusta, focuses on the simulation of theintake, compression and expansion stroke, including combustion simulation, using an opensource CFD code.Simulation of internal combustion engines offers a great challenge in the field of CFD research.Moving boundaries of the solution domain, caused by the motion of the piston and valves, leadsto deformation of the computational grid, with decreasing quality of the solution as result. Basedon this, a previously developed mesh motion strategy was employed where a number of meshesare used to cover the whole simulation cycle. Within each mesh interval the internal cell pointsof the mesh are moved to account for the boundary motion of the piston and valves. This strategywas previously applied to simplified geometries as well as real engine geometries.

Sara Lidman?s first novel, Tjärdalen (The Tar Pit, 1953), addresses ethical issues in a remote village in the north of Sweden. This essay discusses the novel?s narrative technique and the ethical aspects implied by the narration and aesthetic design. The approach is based on Adam Zachary Newton?s narrative ethics, which links narrative theory and method with an ethical perspective.

The Master Thesis work this report is based upon has been conducted in cooperation with Svea Teknik AB. Svea Teknik is a consultant firm which is developing parts of a tunnel boring machine on behalf of Atlas Copco. The machine is being developed to mechanically excavate hard rock by fixating itself in the tunnel and then press a large rotating cutter-wheel equipped with disc-cutters against the tunnel wall. The disc-cutters are the tools that are in direct contact with the hard rock and are therefore exposed to extensive wear and needs to be replaced on a regular basis.The purpose of this Master Thesis has been to develop a service equipment that will enable time effective and safe changes of disc-cutters. The disc-cutters have a diameter of 17 inches and weigh about 130 kg.

AbstractPurpose ? The purpose of this study is to investigate possible reasons for long lead-time in a customer driven production, and how the lead-time can be reduced. To fulfil the purpose the study has been broken down into two questions.1. Whichfactorsaffectthelead-timeinacustomer-drivenproduction?2.

Food is widely consumed and in 2011 an average American devoured approximately one ton of food. The production of these goods requires large amounts of energy and contributes to 22-31 % of all greenhouse gas emissions occurring in Europe. More than one third of the produced food is discarded instead of consumed, and food waste make up about 30 % of the waste generated by households. 60 % of this food waste could be avoided if the eatables were handled in a better way.Avoidable food waste arises partly because residues from food are not taken care of, and because the food is not stored in a way that optimise its durability. Residues arises part- ly because of the contradictory and complex demands of everyday life and are, because of our busy lifestyle, difficult to avoid.

The study is based on a new approach on how Swedish healthcare is supposed to be controlled and organized. There is a renowned administration problem within Swedish healthcare, which seems to be an obstacle to exploit the resources to the fullest. The latest venture within the healthcare system is patient involvement, where the patients become co-producers of their own care, which aims to both improve and make healthcare more efficient. A few wards in Sweden have implemented this new approach whereupon the study intends to discuss the effectiveness and efficiency in some of these.The study is restricted to three wards, whereof two of these are inpatient wards and the other one is an outpatient ward, within the medical clinic in Jönköping County Council, which has implemented the patient involvement approach in their daily work. The methodology for this study is qualitative in its nature where a time study of personnel time allocation and supplementary interviews with managing nurses on the wards have been conducted.

?Ecosystem services are the ecosystems direct and indirect contributions of ecosystems to human well-being.? In order to reach the generation target and the environmental objectives it is important to increase the awareness of biodiversity and ecosystem services and it?s importance to human welfare and simultaneously highlighting the value of ecosystem services. The value of ecosystem services should be integrated into economic standpoints, political considerations and other decisions in the society. In today?s society there is a problem concerning that the value of ecosystem services are not considered in economic terms, which can result in solutions that are unfavorable for our welfare (Ministry of Environment, 2012).

Arvika Fjärrvärme AB, a district heating company from Arvika, today cover 74 % of their total energy production with biofuel wich runs a 16 MW bioler giving process water at saturated liquid state.In recent years Vaporel AB has introduced a new tecnique that gives an external generation of steam after boilers. The concept is built on an adiabatic pressure drop of the saturated liquid in a so called Flashbox which makes a small part of the liquid to evaporate. The generated steam is lead into a turbine where electricity is in a conventional manner.The purpose with this rapport was to do a basic study for the specific system at Arvika where it?s possible to see the potential production of electricity that follows an installation of a flasbox.The final goal was to introduce an economic analysis of a flashox installation at given conditions.To reach our goals we have created a model in Excel where we used the given conditions at Arvika Fjärrvärme to do our calculations. The model has been tested at three different states, of process water returning to potboiler, to be able to decide the optimal operation for the system at present.The studies have resulted in a pressure of the processwater at 14,5 bar (at) and a pressuredrop to 9,5 bar (at) in the flashbox.

The main purpose of this bachelor thesis is to create a product in the form of a database that can be used for cost estimates of equipment within bio refineries. Through interviews and literature searches the key components and their costs were identified. The database was constructed in Microsoft Excel with different tabs for different categories of components; these tabs are further divided into three parts: one part with costs, one part with calculations and an information part. Most of the part with costs contains the expenses found in scientific papers during the literature study, the calculating part converts different capacities according to user preferences and the currency to euro (?) from 2010 and the information part consists of references and information about what is included in the cost.The database is a good tool for making cost estimates for bio refineries.

The aim of this thesis is to examine the archivist's professional role in public authorities and discuss if, and in what way, the profession is effected by the new swedish process oriented archival description system. The study focuses on swedish authorities and does not make any international comparisons with other institutions. Neither does it investigate archivists workingin the private sector, but centers on public institutions.The survey is performed in five swedish public authorities, using interviews and observations. Grounded theory is used as a method initially in the purpose of keeping an open mark towards the object of study. The initial results led on to questions about how well the archivists perceived that communication within the authorities served, and how this in turn prepossessed their work situation and the professional roles in which they found themselves.

This thesis was conducted at Mälardalen University in Västerås and Härjeåns Nät AB, mainly in Sveg. Härjeåns Nät AB is a network company that delivers electricity in Härjedalen municipality, Ånge Municipality, Ragunda and Bräcke municipality. The maintenance and dismantling of electricity and broadband networks generates a lot of waste. The purpose of this work is to present proposals on the management of the waste. The goal is that all of Härjeåns offices should have equal management for the waste and an overview of how to manage the various wastes.

Trading based on technical analysis has its roots in the U.S. financial industry where it has long been common practice, in Sweden however the trading style has not had the same impact. Based on the results from the preliminary study we believe this is about to change and that the topic therefore requires further studying. Several online stockbrokers today provide information and tools for technical analysis to their clients. As the list of indicators to use for creating strategies is so immense it is interesting for an investor to know what actually could be the basis for a profitable investment strategy.

Syftet var att kartlägga arbetstillfredsställelsen hos chefer i svensk äldreomsorg samt undersöka om det fanns några skillnader mellan chefer i privat och offentlig verksamhet. En rikstäckande webbenkätundersökning (N=104) genomfördes. Denna genererade både kvantitativ och kvalitativ data. Cheferna som sammantagen grupp visar på en förhållandevis hög arbetstillfredsställelse. Resultatet visade dock att det fanns signifikanta skillnader mellan privata och offentliga chefer vad gäller arbetstillfredsställelse.

AbstractPurpose ? The purpose of this study is to examine the challenges that exist within thematerial handling process, to and from a department for service and maintenance at a hospital, and how the challenges can be managed to achieve a more efficient material handling process. In order to fulfill the purpose the following two questions where formulated:1. What challenges exist within the material handling process, to and from adepartment for service and maintenance at a hospital?2.

Title:Pecking-order i små tillverkande företag Level of thesis:Master´s dissertation in banking and auditing Authors:Mathias Klasén and Maria Waderoth Advisor:Joakim Winborg Background:The area of business financing has been well studied during the 1900´s. Many studies and theories are made with big corporations in mind, and the importance of small businesses wasn?t enlightened until the end of the 1900´s. Business financing has created a number of theories, among them Myers pecking-order theory. This theory implies that business managers prefer internal equity in front of debt and external equity.