This thesis concerns waste management on construction sites and was conducted on behalf of ICA Fastigheter.Areas of concern:How can an environmentally-efficient waste management system on construction sites be defined? What potential exists for exploiting the waste resources that are generated?How can the waste management be optimised by reducing the quantity of waste and by optimal sorting?How can the client of a project influence the waste management?The purpose of the work was to investigate sustainable waste management in the building and construction sector and to highlight waste as a resource from an environmental and economic perspective.The aim of the work was to define an environmentally-efficient waste management system, to analyse the potential that exists in waste management and to draw up guidelines for optimal waste management.The method consisted of a literature study, two visits to construction sites and four interviews.An environmentally-efficient waste management system means that the waste is managed in the following order of priority:Prevention     Reuse  Recycling     Energy recoveryLandfill     The prevention of waste is an important area that has not been adequately explored by the building and construction industry. The quantities of waste could decrease with the implementation of measures such as ordering materials in the dimensions required, prefabricated components, logistics centres with Just-In-Time deliveries, less and improved packaging and less wrapping. The reuse of waste materials and temporary apparatus as well as the use of a return pallet system are examples of reuse that reduces the quantities of waste.In most cases the source sorting work is a matter of course and the proportion going to landfill is down at a low level. The source sorting can be optimised by sorting all materials that can be reused and recycled to use them as a resource.

In this diploma work the approach of determining the required amount of reinforcement in slabs exposed to pure tension is processed, on behalf of Ramböll Uppsala. It is a well-known problem in the industry that there are uncertainties in the determining of the amount of crack reinforcement, especially for structures exposed to pure tension. Cracking caused during the time of dehydration in concrete slabs is the most common defect according to statistics made by CBI[1], which provides numbers as high as 35 % of all the defects caused on slabs are generated by cracks. Comparisons between Sweden's former national standard BBK 04, Building Regulations for concrete structures due to restrained forces of shrinkage, and the current European standard Eurocode 2 are carried out through theoretical studies and concludes with several examples of calculations. Rigorous calculations of both standards, BBK 04 and Eurocode 2 with application of the national annex in Sweden and Denmark are performed.

The report addresses four main tasks, situation analysis of the company's total costs and transportation volume, cost analysis associated with the adjustment of the filling ratio, transport costs for the expansion and new expenses on a combination of expansion with new adjusted filling ratio.  Increasing transport costs for the company was the main reason for the request of the current situation analysis. A survey of the total cost with the actual volumes and transport provider pricing is the basis of the analysis that extends from May 2006 to October 2008. The results show an increase in costs, both overall expense and per cubic meter of transported goods. Volume spreads, trends, and seasonal variations are according to our and the company?s expectations.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

AbstractThis thesis is the final part of the Innovation and Design Engineering Programme (180 ECTS credits)at the Faculty of Health, Nature and Engineering Science at Karlstad University. The extent of thisthesis is 22.5 ECTS credits and has been performed independently by Hannes Jernberg during thespring of 2013. Metso Paper Karlstad AB is the task maker of this project, and Arvid Johansson is thecompany Representative. Metso Paper Karlstad AB is one of the world leading developer andmanufacturer of tissue paper machines.In the current situation, the company has developed and patented a power management systembased on a Cross Flow Turbine. The current construction is limited to a paper width of 2.9 meters.The company wants to take advantage of all the opportunities provided by the patents, to develop aturbine solution paper machine with a paper width that is wider than 5.5 meters, and give the abilityto manufacture paper for lower energy consumption which is an important part of the production asit is very energy intensive.Problems arise with the increasing length of the turbine, ultimately resulting in that the deflectionbecomes too big and that the momentums, due to the increased torque the turbine blades breaks.By applying the design process, this work has resulted in a number of potential solutions to theproblem.

Introduction When a child comes into a family changing conditions for the older sibling, who may feel left out. This can be a problem for parents who face new challenges towards the older sibling, which can lead to parents looking for advice and support. Parenting is an activity that strengthens the role of parents and provides information about children's health and social development. Purpose The purpose is to describe the parents' experiences of support in their parental role by participating in the sibling circle. Method Semi-structured focus group interview was conducted and qualitative content analysis was performed.

The problem with passive farmers has arised as an effect of the European Union´s common agricultural policy (CAP) and the decouplement from production-based payments. Payments to passive farmers contradict the purpose of the single payment scheme and constitute a great cost for the EU. The new contractual period after 2013 has given rise to discussions on the direction of the CAP with a purpose of increasing the efficiency of the single payment scheme, and reducing passive farming. The aim of the study is to increase the knowledge about a few factors? influence on passive farmers? attitudes towards land use and the CAP.

Facilitated by the breakthrough of the internet, new ways of organizing internet-based projects that harness the power of the crowds are becoming increasingly common. Today there are ways of using the crowd as paid labour, as funders of your new project ventures and even for helping scientists doing science. Staying true to its traditional principles of objectivity and trustworthiness while asking the crowd to contribute, crowd generated ?Citizen Science? does not provide even the slightest amount of pay in exchange for the time and effort put in by their contributors. Surely there can not be many people willing to do such a thing voluntarily? Actually, practice is showing the exact opposite with contributions counted in their millions among the more popular Citizen Science projects.

Hard-to-heal ulcers are resource intensive due to the fact that they are difficult to treat and especially vulnerable to bacterial invasion. The bacterial culture contaminating these wounds often consist of several different bacterial organisms that originate from endogenous sources. Necrotic material in ischemic ulcers provide nutrition which support bacterial reproduction, increasing the risk of infection. Determining causative pathogen in infected ulcers proves to be difficult when culturing swab samples, however Staphylococcus aureus and hemolytic streptococci generally act as primary pathogens.    The aim of the study was to investigate if the detection rate increased for S. aureus and hemolytic streptococci when culturing swab samples from ulcers on Columbia CNA; a media selective for gram-positive bacteria.

Aim and starting point: The aim of the Bachelor thesis is to examine and define the paramount knowledge Chinese businessmen need in order to succeed with their establishment in Sweden. The authors also seek to answer what incentives attract Chinese businessmen to come to Sweden, as well as how Chinese establishments in Sweden can be predicted to appear in the future.Results/conclusions: The study outlines key areas in which Chinese businessmen should have knowledge in order to succeed with their establishment in Sweden. The results also gives an indication on how Chinese business establishments in Sweden will appear in the future, into which areas the Chinese mainly invest/establish in, as well as why and how these are done. On the basis of this material the authors generate proposals for educational packages which among others can be sold to Chinese businessmen.Knowledge overview: Here relevant theory connected to the area of study is presented. The knowledge overview presents the Swedish in relation to the Chinese perspective in areas such as: culture, hierarchy, relations, Face, communication, HRM, education, CSR and labour law.

Public concern and the need of responsible way of doing business have brought forward the issue of sustainability at the forefront of discussion in the last decade. Even though, food retailers are playing an important role in the economy, they are exposed for criticism by media and consumers for any socially and environmentally irresponsible business practices because, the potential environmental and social impacts from their operations are significant. These impacts need to be recognized and properly addressed. The main objective of this study was to assess the sustainable business management of a cooperative food retail business in Sweden, known as Konsum Värmland (KV). The necessary data and information on history and status of KV, and its practical activities concerning the implementation of sustainable development programs as well as the motivation and challenges encountered by KV during the implementation were gathered via reviewing different documents, research papers and press releases; interviewing decision makers and other personnel in KV and other researchers from Swedish University of Agricultural University who have investigated KV.

Phosphate is a used as a surface treatment method which is used for various purposes in the industry. In this case, phosphate coated wire is used in the processes to achieve a desirable outcome. The reason to why phosphate coated wire is used in the production process is because phosphate acts as an accumulator, where it stabilizes the lubricant on the surface of the wire. Lubrication is important because it plays a major role in the roll quality and characterizes important benefits regarding the outcome.Currently, SKF has to wash away all phosphates residues after extrusion process in an operation called tumbling. The main reason for this is simply because the surface has to be completely free from lubricants and coatings till the next step of process.

De senaste årens långa och kalla vintrar har lett till ett ökat antal halkolyckor. Genom att undersöka halkolyckors utsträckning samt halkskydd som fanns tillgängliga konstaterades det att ett behov av nya halkskydd fanns. Enkäter för att ge svar på användning av halkskydd togs fram och svar från personer i åldrarna 20-65 visade att man överlag inte använde halkskydd. I stor utsträckning berodde det på halkskyddens dåliga kvalité och den negativa stämpeln som fanns på dem . Textila material undersöktes för att finna lämpliga egenskaper.

This thesis work was made for Södra Cell Mörrums bruk in Blekinge. The purpose of the work was to develop a computer model in the simulation program Extend for the removal and balance of organic oxygen consuming substances, measured as COD (Chemical Oxygen Demand), in the new biological treatment plant in the mill. The plant produces two different pulp products, TCF- (Totally Chlorine Free) pulp and ECF- (Elementary Chlorine Free) pulp, for sale. The different bleaching procedures affect the characteristic of the wastewater and thus the effectiveness of the biological treatment plant.In the model that was developed the COD in the wastewater was divided into five different COD-fractions: soluble easily degradable (SS), soluble hardly degradable (SR), soluble inert (SI), particulate inert (XI) and particulate biomass (XB). To create the model FlowMac? was used as a base.

During year 2004 Ålö AB made significant change in their production process. The production of front loaders is nowadays highly automated with short operation times. To be able to control their process in a better way Ålö recently decided that they needed a tool for simulation of their production and to shift patterns. This final thesis started with a pilot study in Ålö?s factory in Brännland.