A current issue today is to try to implement creative design as a way to solve wicked problems in scientific contexts such as HCI. Since the problems are wicked, they have no given solution which makes the traditional methods inadequate. In these cases, creative design can be an alternative. Creative design is not used in scientific contexts because it is viewed as something unaccountable.In this essay we argue that creative design not necessarily have to be unaccounted. We discuss various views of creative design and translate theory to a practical context.

Danmarksplass is situated just outside the centre of the city of Bergen on the Norwegian west coast. It was built in the 1930´s as a result of an architecture competition won by the prominent Norwegian architect Ole Landmark. Danmarksplass was originally meant to function as a local square, but its location next to Fjösangerveien, a road that caters for most of the through traffic in the Bergen valley today and is part of one of the main European roads, E39, would prove it difficult for that idea to prevail. Along with the ever increasing car traffic, Danmarksplass has more and more become a very busy traffic junction. Nowadays the car is the sole ruler of Danmarksplass.

This thesis was performed at Vendig AB which is a company that develops and sells products such as belt scrapers for conveyor. The thesis is divided into two parts, one part where it´s investigated which tension force is required to tighten Vendig AB´s scraper Hampus against the belt in a correct way. The second part is called mechanical design and here a new and more compact tension device is developed.Field studies has been conducted at a couple of Vendig AB´s costumers to get a knowledge base about how Vendig AB´s products are used, how they function and the environment they operate in. During one of the field studies the force between the scraper and the belt was measured. The result from the measurements, together with a report from LKAB [1], were evaluated and summarized in a table.

PR appears to be an indistinct division and a complicated resource for companies to value. The current circumstances are negative to the credibility and reliability of PR. This study emphasizes how an application of return on investment contributes to a more strategic use of PR and increases the status and credibility for the division.We experience that measuring the economic value of PR is of great importance and of current interest with few prior studies made. The purpose of this study is to find out how a PR-agency and one of its clients relates to and works with evaluation of PR-activities and to which extent the economic contribution of the activity is measured.The foundation which the theoretical reference grounds on is theories of Delusions of PR and the use of benefit-cost analyzes, Stages and Levels for Evaluating Public Relations Programs, Marketing Return on Investment and PR Return on Investment. The theoretical reference serves as a base during the analyze of the study.The conclusion, based on the empirical body of information, is that an application of return on investment could contribute with a higher status and credibility for the PR-division.

This thesis examines the relationship between the marginalization of ornamentation during functionalist modernism and the effect it had on female graphic design practice. By examining the historiography from a gender and feminist theory of history I present a different way of interpreting, not only the history of graphic design but also the concept of graphic design. This thesis does not reach a conclusive result, instead it sets the foundation for further research and illustrates the opportunities that we as graphic designers have to benefit contemporary graphic design by critically reviewing and redefining our history through a diverse historiography..

This degree project contains a theoretical and a practical part about magazine design. Literature aboutthe subject?s typography and magazine design has been studied and put into practice on the professionaljournal Ingenjören. Besides of that a study about the history of magazine typography for the lastfifty years has been done.Typography and other design factors are important for the magazine to be readable and gives at thesame time the magazine an identity of its own, which has become more and more important throughoutthe last decades.The result of this degree project is a new design for Ingenjören, a design that agrees more with howthe journal want to be considered. A new template, a dummy and a manual have been produced.

'Hir in the box' is a study about the gender perspective in packaging design and how it is today. The study deals with the product category razors, for both women and men, to examine and compare products with the same function but with different designs. Based on an analysis of how packages are designed for different sexes, information should be given on how gender-neutral packaging can be designed and used in the future to reach the market. The purpose of the study is also to contribute to future research on the subject. To fulfill the purpose of this study, nuanced and in-depth data is collected by means of a small-N-study and a qualitative study in the form of open group interviews where the survey units are reviewed and discussed.

The aim of this Master?s thesis is to investigate if the library can be a real partner for researchers in managing and dealing with their research information. In this study, six researchers have been interviewed about their problems with information management. This study uses the method Critical Incident Technique for the interviews with the researchers. This method focuses mainly on problems and what happens around those problems.

This thesis was carried out at Atlas Copco Tools and Assembly Systems. The purpose hasbeen to develop a design tool to be used for development of new electric motors for AtlasCopcos electric nutrunners. The focus of the thesis has been to increase productivity bydecreasing the power losses in an electric tool. The productivity is defined as themaximum number of tightenings a nutrunner can perform without becoming too hot.Before starting the development of this design tool an existing Matlab script, whichcalculates the losses in a slotless electric motor, has been studied and modified torepresent the real losses in a better way. The modification has been made by performingpractical studies of different losses and then adjusting existing parameters in the Matlabscript.Because design changes in one part of a mechatronic system can lead to a decrease inperformance of another part the choice of parameters that can be changed has been madeso that other parts of the system is affected as little as possible.A study of the existing tools efficiency during an entire tightening has been made toincrease the understanding of when and where the different losses appear and to comparethe modified Matlab script with the measured values.The design tool was formed so that it executes the Matlab script, that calculates thelosses, for a number of different design options and stores the alternative which producesthe least losses.

I projektet, som är ett examensarbete från programmet högskoleingenjör i teknisk design vid Luleå tekniska universitet, har ett koncept på en delvis förarlös bil tagits fram. Arbetet har utförts mot instutitionen för arbetsvetenskap och har givit värdefull erfarenheter inför fortsatta studier vid Umeå Institute of Design. Resultatet är en lyxig fyradörrars kupé med tänkt lansering omkring år 2020. Bilen sköter till största delen av tiden körningen på egen hand men tillåter även manuell körning på ett nytt och revolutionerande sätt. Fordonet är även en social mötesplats där passagerarna får uppleva en ny dimension av att resa med bil..

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign..

Uppsatsen beskriver arbetet och undersökning för hur deduplicering i filsystemet ZFS påverkar effektförbrukningen. En större mängd redundant data förekommer i centraliserade lagringssystem som förser virtualiserade servrar med lagringsutrymme. Deduplicering kan för den typen av lagringsmiljö eliminera redundant data och ger en stor besparing av lagringsutrymme. Frågan som undersökningen avsåg att besvara var hur ett lagringssystem påverkas av det extra arbete som det innebär att deduplicera data i realtid.Metoden för att undersöka problemet var att utföra fem experiment med olika typer av scenarion. Varje scenario innebar att filer kopierades till ett lagringssystem med eller utan deduplicering för att senare kunna analysera skillnaden.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.

This is a qualitative study based on interviews with teachers, social workers and school counselors ? with aim to analyze how norm critical social work is in schools. Gender and sexuality norms are in focus which is analyzed in a intersectional and queer theoretical perspective. The study shows that what is defined as a norm in the society varies both socially, historically and culturally. School is a reflection of its society and therefore also reflects its norms, such as heteronormativity and gender roles.

Responsiv design syftar till att en webbsida ska anpassa sig efter anva?ndarens enhet, oavsett enhetens ska?rmstorlek. Arbetet har ga?tt ut pa? att ta reda pa? om man kan utveckla en framga?ngsrik responsiv design som fungerar pa? ma?nga typer av enheter enbart med en persondator som utvecklingsplattform, och pa? sa? sa?tt undvika att beho?va genomga? en stor process med testning. Resultaten visar att det a?r fullt mo?jligt. .