This report describes the master thesis project ?Weight Optimization of a Composite Chassis for a Multimodal Lightweight Vehicle? which is a part of the Master program in Naval Architecture and a part of a research project at the Centre for Naval Architecture, KTH. Demands on smart and energy efficient transport solutions are continuously increasing. In the Stockholm region the citizens are expected to increase with 25% and the road vehicles with 80% until 2030, putting high demands on the traffic system. Using a small multimodal vehicle deals with this problem and uses both the land and waterways for transportation.

The following study is a discourse analysis of the concept of critical thinking within pre-school teacher education. It considers the following questions: how does the concept of critical thinking appear in policy documents, central to the pre-school teacher education, and which possible conceptions of critical thinking are conveyed by students and teachers active within the education. Additionally, the study seeks to discuss, as well as suggest a possible relation, between the findings of those two questions. In reviewing the material (consisting of five semi-structured interviews with students and teachers, and of a selection of policy documents central to the education), I argue the existence of a sort of project within the education, which presents critical thinking as a higher value. At the same time, I argue that the concept is not defined or concretized. This project, however, as I suggest while drawing upon Foucault?s ideas of discourse and government, involves a rather high degree of control.

The communication and mediation of information and news has, under the latest decades, increased into an incalculable amount. In the newsflow that has come up it has become more and more urgent to sort and select the relevant and correct news. Simultaneously as the information has become one of the most important goods for the western world, the criticism against media has become more loudvoiced and especially the criticism aims at the fact that publicness has become less public and the public conversation is nowadays filtrated through media. The American Joey Skaggs can be reckoned among with the group of media critics, but his course of action and methods to reach out with his critical view, stand out strikingly from the traditional media critics. Instead of, as most, aiming the criticism against media, from an outside perspective, Skaggs chooses to attack the media from the inside.

Service Design is a relatively new, unexplored and exciting phenomenon that through an interdisciplinary work methodology designs services. A discussion has been going on for a long time regarding whether there is a difference between products and services. Services are often classified as immaterial, heterogeneous, non-storable and inseparable in relation to products. A question that arises is if something specific characterises the work methodology used regarding service design. The aim with this paper is thus to explain the work methodology when working with service design.

This paper presents the creation of a strengthening visual profile for StretchFlex UF. The project consists of an external as well as an internal part. The external part is on the order of the company StretchFlex. The company is created under the education concept by the name of Ung Företagsverksamhet (Young Entrepreneurship) and has passed on to the Swedish Championships in Young Entrepreneurship at the Stockholm International Fairs. Of that we have been commissioned to develop an updated logotype for the company, for the current does not keep proper quality according to the client.

In my study, I have chosen to examine how the user interface and content must conform to design guidelines for responsive design makes it suitable for diverse desktop environment and for varied mobile platforms. The purpose of this study is to examine the extent recommended design guidelines based on scientific research has a positive impact on user performance and perception when using this study delivered hi-fi prototype. The goal of this study is to provide a Hi-Fi prototype with high usability that will introduce and inform the public about BrasilCine according specifications. Study findings from user testing and supplementary questionnaires show that the implemented technologies as design guidelines for responsive design and design features have a positive impact on user performance and perception. The study results are therefore relevant for further prototype development..

This report describes and explains the development of a comprehensive solution including visual identity, print catalog, website and online shop for the furniture company Resize Design. The development and production of these have occurred in the iterative processes with relevant theories as a basis. The theories include user-centered work processes, usability, design principles, interaction design, design patterns and web-compatible solutions. The report documents and discusses the work which is divided into different phases. .

The present thesis deals with Qur'anic Studies among Turkish immigrants inSweden. The aim is to investigate the significance of Qur'anic Studies forMuslims in a country like Sweden. This thesis also highlights the role ofthe Turkish state in encouraging and funding Qur'anic Studies in Sweden.I have carried out a case study on a Mosque outside Stockholm, where anImam, sent by the Turkish government, is in charge of the Qur'anic Studies.It is found that Qur'anic Studies is important for Muslims in Sweden in theirefforts to preserve their religious identity. The results also indicate thatQur'anic Studies also has an ideological dimension insofar as it is a meansfor Islamic governments, groups and individuals to further the interests of political Islam..

The aim of this essay was to investigate how religious topics and events are presented in five coursebooks in social studies. To do this the following questions were answered: In which context do discussions about religion take place? Are religions brought up in different contexts? To which extent do discussions about religion occur? The method consisted of a both quantitative and qualitative content analysis. The results of this essay showed that discussion regarding religion in social studies coursebooks mainly focuses on wars, conflicts, terrorism and to some degree the human rights. Islam was the religion that occurred most frequently in the coursebooks.

The aims of the practical work carried out for this thesis were to redesign a clinical decision support system for thoracic surgeons, called AssistMe, and to evaluate the concept behind this system. The main objective of the thesis is to give an account of the considerations that were found to be of key importance for designing a clinical decision support system for thoracic surgery. Another aim was to let future users test the system after it had been redesigned and evaluate the concept behind it. The thesis also investigates users? experience of the system and their views on whether it would be applicable in their daily work practice.

The report describes the production of graphic correspondence and marketing material for DUCIS(Dalarna University Centre for Irish Studies).A logotype symbol is created on the basis of an element from the Celtic art, and a graphic material thatharmonies with this ideal of style is built around the symbol. A unique visiting card, correspondence cardand letterhead is produced to strengthen the identity of DUCIS outwards.The work proceeds with an international education folder which is an important element in the marketingwork for the MA-education which starts in the autumn of 2003. Two posters, one for the opening ofDUCIS in may 2003 and one for a conference in 2004, are produced. Finally, a redesign of the book coverfor NIS, Nordic Irish Studies, is carried out.The report describes the working process consisting of meetings, practical work and other elementswithin the process. The conclusion is that the work has been quite successful and that this, to a largeextent, depended on an engaged and supporting commissioner.

The purpose of the project was to design an electric bicycle to offer thetarget group youth an attractive alternative to mopeds. The basis for theproject was user studies in which young people were interviewed andobserved in their daily environment.The project resulted in a product, designed with the focus of integratingthe battery to the shape, to create a wholeness that is simple andintuitive.!The product is easy to use and operate, with an automatic transmissionengine.! A smart modular system allows the user to choose design withmudguards, rear rack, or without. The battery design is based on "cradleto-cradle" to maximize the battery life and minimize environmentalimpacts.It was very fun and rewarding to have the opportunity to present theresults for the youth who showed great interest in the product.The project was conducted in collaboration with Designit and Cycleurope..

During the last decade, the construction industry has focused on improving and optimising its production process. The construction industry is now facing larger changes regarding efficiency in their supply chain for the next decade. Many companies are now trying to optimise its supply chain together with its supplier. JM AB, which is one of the biggest construction companies in Sweden, is looking at different options to improve its own logistics together with their suppliers. One option is to use a terminal between JM and the suppliers to solve problems such as quality, custom service and inventory for the in production.

Design Patterns introducerades på 1990-talet och användningen sades medföra en rad fördelar som skulle hjälpa systemutvecklare i deras arbete. Bland annat skulle Design Patterns underlätta för systemutvecklarna att kommunicera med varandra samt ge en bättre överblick över och förståelse för systemarkitektur genom en höjd abstraktionsnivå. Systemutvecklaren skulle även få en ökad förståelse för god design. Två kritiska artiklar fick oss att vilja beskriva hur systemutvecklare som aktivt arbetar med Design Patterns upplever att centrala fördelar uppfylls. Vi genomförde fyra fallstudier där vi intervjuade erfarna systemutvecklare och vår slutsats är att de upplever att fördelarna med Design Patterns uppfylls.

The company Somas, Säffle, has assigned Fredrik Kjellin the project of finding out how ?KVTF DN250?, one of their own valves, reacts on cutting forces under production. They wish to know if and then how much it?s possible to minimize the wall thickness of the valve with neither plastic nor to big elastic deformations caused by processing.The most critical processes have been identified as rough lathing. The study has shown that the marginal for a wall thickness of two millimeters, to fall short of the yield stress in the most critical process, is good.