REINERTSEN AS performs expansion and buckling analyses of pipelines using ANSYS, afinite element modelling and analysis tool. In an expansion analysis the pipeline is modelledwith thin?walled pipe elements called PIPE20 which allows plastic deformation. However, ina recent analysis the results retrieved from the PIPE20 element were incorrect for strainsabout 1 percent. One main issue was that the PIPE20 element overestimated the strains.The purpose with this Master Thesis was to become familiar with the theories and analysismethods used in pipeline design.

Background: The most energy efficient houses today are so called passive houses. These houses achieve high energy-efficiency partly by having well insulated walls. U-value describes the amount of heat transfered through a building element, the more insulation, the smaller U-value. A typical passive house wall have a U-value of 0.10 W/m2,°C. The passive houses are primarily made as small family houses and not as a block of apartments.

This quality study was carried out with seven semi-structured interviews and five of them were with elite women´s football coaches. What has been studied is how elite women?s football coaches are working with injury prevention training to their knees for the women?s football players. An anterior cruciate ligament injury in elite women?s football is both common and serious knee injury.

This Master thesis is about a postal- and telegraphic building in Eskilstuna, Sweden. The construction methods for the specific building and buildings in general from the same time are described. The purpose of the report is to describe the loads acting on the building and how it has been built and why it has been rebuilt during the years. After this, possibilities of reconstruction and adaptation for today?s demands can be evaluated.

Comfort analyses regarding human induced vibrationsIt is not too common among civil engineers in Sweden to perform comfort analyses considering the vibrations caused by human activities. In addition, the Swedish standards lack requirements to be used for comfort analyses in design of floor-systems. The demand for large spans in combination with slender slabs, is today a reason to investigate the floor-system constructions, in order to prevent disturbing vibrations and oscillations.The purpose of this thesis is to create a guide for how a comfort analysis, considering vibrations, should be implemented. Göran Svedenbjörk who is an expert in structural dynamics has been interviewed where he presents his latest project Värtaterminalen and answers some questions about vibrations due to human activities.Floor-systems, consisting of concrete slabs supported by steel or concrete beams, have been investigated with simulations in the finite element program Abaqus. In the simulations, the influence of various factors on the natural frequency of floor-systems and the acceleration level caused by dynamic loads, is studied.

This technical report describes the master thesis in material engineering called ?Testing of surfaced hardened materials conceivable for gears and shafts?. The work extents 20 academic points. Land systems Hägglunds manufactures and sells different kinds of combat vehicles and terrain vehicles. Since the demands for bigger and stronger vehicles increases all the time, so are the demands on shafts, gears and other transmission details.

Background:Investments in different forms have always been popular to every human being. For the most common investments, such as stocks and bonds, there are loads of information to gather for the investor. Historical data like risk, return, dividends and fundamental data like annual reports are often very easy to find, regarding these kinds of investments. The background of this thesis is the lack of market information in residential real estate investments. A problem with this investment is that there is lack of information regarding risk adjusted return for real estates, which this thesis intends to present.Objective:The objective with this thesis is to study which alternative, directly-owned residential estates or stocks, who generates the highest risk adjusted return.

IRB 340, Flexpicker is an industrial robot used for sorting, packaging and the handling of details up to two kg. The Flexpicker is a delta robot, meaning that it with three arms controls a triangular plate, swivel, in a work area shaped like a cylinder. Joints using plain bearings connect the arms.The plain bearing in use today consists of a plastic ring which slides against a hard anodized joint ball. Despite the fact that the plastic contain friction-lowering additives, the bearing needs to be lubricated to prevent noise. Because the robot is used in food and drug handling environments, where the demands on hygiene are set very high, the robot is often washed.

This master thesis is a study of anaerobic thread lockers and is done in cooperation withÖhlins Racing AB, which is a Swedish manufacturer of vehicle suspensions.The suspension in vehicles is constantly exposed to high vibration levels and a suspensionunit has several screw- and cylindrical joints. As an extra safety precaution so that thecomponents in the suspension doesn?t fall apart when using the vehicle, an anaerobicthreadlocker is added in these joints. The handling of these threadlockers is not totallyharmless and could lead to allergic reactions, and therefore there are Swedish laws to limit theuse of these. However, new types of anaerobic threadlockers have recently been launched onthe marked that are not considered under this law.

This paper is based on a literature review and interviews made with managers in small-scale nurseries for pot plant production. The review helped to identify the worst occupational hazards in pot plant production. The interviews provided a way to investigate how the nurseries act so as to avoid the worst hazards and what they do to even out work intensive periods during the season in order to get a more even distribution of work over the year. According to available statistics problems with back and shoulders are the most common of the physical disorders and the risk for occupational accidents are high for greenhouse workers. Most of the occupational injuries are connected to musculoskeletal problems. The handling of material is often manual and involves frequent lifting and carrying of heavy loads, the strenuous work postures and static muscular tensions these repetitive tasks are associated with causes straining and overloading.

 AbstractThis Master?s thesis analyses the dynamics of the medieval counterweight lever engine, ortrebuchet, a type of mechanical artillery. The purpose is to study the differences between different types of these machines, and see if computer simulations can be used to validate preserved advice on construction. Simulations include machines with a fixed counterweight, a hinged counterweight and a combination of both counterweights.Due to the almost complete lack of archaeological finds and insufficient historical source material there are still, after more than a century of research, many unanswered questions concerning the design and performance of these machines.The present study is based on an analysis by Jahsman (2004). A more detailed mathematical model employing Coulomb-friction is used.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

The conditions for a good silage process start with good wheather and choice of crop, then choice of harvesting machinery. The shorter and more mechanically treated crop, the better quality of the forage. (Pauly 1994). This study has examined the variations in chopping length depending on harvest method. Precision choppers works with a rotating chopping cylinder, where the crop is cut into pieces.

Hydropower is an important source of energy in Sweden and accounts for about 46 % of the total energy production. Sweden has about 1 200 hydropower plants and with the intention of raising the pressure head of the water and to store water, dams are built by the power plants. The storage reservoirs make it possible to adjust the energy production by demand and season. Dams in connection to the reservoirs are subjected to additional loading during periods of high floods or when an icecap in the winter is formed on the reservoirs. In order to maintain the dam safety, the power companies in Sweden are working with guidelines for dam safety from RIDAS.

The costs of logging and of transportation with truck are dominating the total cost of wood delivered at industry. To support the profitability for the members' forestry the processing and handling with the timber has to be as efficient as possible. Increased length of pulpwood in thinning is one conduct that can result in higher productivity and/or lower costs. The study is scaled as a system analysis with the aim to exemplify the differences between working with 3- and 4-meter as standard length of pulpwood, related to biological aspects, timber receipts, cost of logging and cost of transportation with truck. Important aspects are if the change is technically and biologically feasible and economically profitable.