Sökresultat:
148 Uppsatser om Crane loads - Sida 10 av 10
Tillämpning av GIS-analyser i MKB
The reason for performing an Environmental Impact Assessment (EIA) is to incorporate environmental concern in different kinds of plans and projects. The purpose of such an assessment is to identify and describe direct, indirect and cumulative environmental impacts.Geographical Information System (GIS) is a tool that can be used to combine spatial extension of both sensitive areas and different environmental impacts in a quick and easy way. Because of that, descriptions of environmental impacts and motivation of different standpoints on a specific issue can be more correct and easier to make if GIS is used as a tool.Hence, GIS can contribute to improve the quality of Environmental Impact Assessments. If the benefits of using GIS are to out weight the costs, geographical information of satisfactory detail, actuality and accuracy need to be available at reasonable prices.In this paper, case studies are carried out for three different geographical analyses to investigate the use of GIS as a tool in EIA. From these case studies, more general conclusions about the benefits and limitations of using GIS for Environmental Impact Assessments are also drawn.
Mätning av partikelmassa i avgaser från en dieselmotor
This master thesis was a continuation of a previous study in the diesel exhaust characterization, which is part of the academical work embedded in the EMIR-1 project. The main objective of this thesis work was to finish the installation and make the proper modifications of the particulate mass measuring system located in one of the engine test cells at KTH, in order to be able to measure the mass of the particles from the exhaust of diesel engines.This experiment requires a diluted flow sample from the exhaust that should be sent to the device that makes possible the measurement of particle mass, called TEOM. In the first stage of this project, the objective was to study and make the proper modifications in the existing KTH diluter because there were several problems to obtain a constant dilution ratio from it during tests.This modifications were made and it resulted in a great improvement in the maximum inlet and outlet flow that this diluter can handle. Therefore another modification is proposed for controlling the inlet exhaust flow so it will be possible to regulate the dilution ratio and make it constant along a wide range of engine loads and speeds.The second and most important stage was to make particulate mass measurements possible by analyzing the frequency signal from the TEOM device. The idea was to obtain the frequency of oscillation from the tapered element in the TEOM, and therefore with the proper correlations, be able to predict the particulate mass concentration in the exhaust flow from the engine.An electrical problem in the TEOM circuit was detected and corrected, so the signal that carries the frequency from the TEOM can be analyzed properly.
Industriella avloppsvatten i Chile : Identifiering av problem samt förslag på åtgärder
Chile and Santiago are struggling with heavy environmental problems as a consequence of urbanisation and industrialisation. In the Santiago region the air is seriously contaminated and most of the rivers are classified as heavily polluted.The aim of this thesis is to survey the industrial fluid waste situation in the Santiago region and to make suggestions on technological improvements or process changes. The purpose is also to study five different enterprises more closely and to give more detailed suggestions for improvement. Another purpose is to summarize relevant Chilean legislation.Information, provided by the supervisory authority, about the release of industrial wastewater to rivers has been analysed. Deep interviews have been made with authorities and consultants.
Högtempererat borrhålslager för fjärrvärme
The district heating load is seasonally dependent, with a low load during periods of high ambient temperature. Thermal energy storage (TES) has the potential to shift heating loads from winter to summer, thus reducing cost and environmental impact of District Heat production. In this study, a concept of high temperature borehole thermal energy storage (HT-BTES) together with a pellet heating plant for temperature boost, is presented and evaluated by its technical limitations, its ability to supply heat, its function within the district heating system, as well as its environmental impact and economic viability in Gothenburg, Sweden, a city with access to high quantities of waste heat.The concept has proven potentially environmentally friendly and potentially profitable if its design is balanced to achieve a good enough supply temperature from the HT-BTES. The size of the heat storage, the distance between boreholes and low borehole thermal resistance are key parameters to achieve high temperature. Profitability increases if a location with lower temperature demand, as well as risk of future shortage of supply, can be met.
Uran i dricksvatten : litteraturstudie om reningsmetoder samt pilotförsök med jonbytesteknik
Uranium (U) is a naturally occurring component in bedrock and under the "right" conditions it can dissolve and move into the ground water. Since many people in Sweden depend on drilled wells as their main drinking water supply, they may be exposed to the uranium in the water.
Radioactive radiation is not the major concern associated with naturally occurring uranium. It is rather the chemical properties of uranium that make it a potential danger to human health. Uranium is proven to have toxic effects with respect to the functioning of the kidneys.
Utvärdering av kalkstens egenskaper med laboratorie- och fältmetoder.
A pavement construction designed to cope with the different type of traffic loads; it is exposed to and at the same time it can resist the effect of the climate. A road structure consists of sub- and superstructure which is divided by a boundary known as terrace. During the construction of unbound layers (base course and sub-base course) in the superstructure, it is always ensured that the material meet the requirements for bearing capacity and the degree of compaction. These parameters are controlled by various laboratory tests and control methods. To obtain increased knowledge of the material and improve the quality of the compaction in the field, it is necessary to perform laboratory tests in order to determine material properties.A base course material 0/ 32 mm limestone from Gotland (Hejdeby) was investigated in this study.
How to build a rein tension meter
A large part of the interactions between horse and rider during horseback riding takes place through the reins and the bit and devices for measuring the tension on the reins, rein tension meters, has fairly recently been developed. To safeguard the welfare of the ridden horse riders need to be aware of the rein tension they apply and actively work to decrease it. Furthermore, there is a need to develop the study of rein tension through new techniques and refined analysis procedures. A good-quality rein tension meter should be small in size, sensitive, durable and as accurate for light rein tension as for strong forces. Rein tension meters used in research on horse and rider interaction commonly depend on strain gauge technique for generating rein tension data.
Analys av designalternativ för snabbare dynamik i kolkraftverk med koldioxidavskiljning
Combustion of fossil fuels is today the dominating source of energy. During combustion,carbon dioxide is formed. The carbon dioxide accumulates in the atmosphere,which raises the global average temperature on earth through the so called greenhouseeffect. The only way to reduce the emissions of carbon dioxide from combustionin a coal fired power plant is through carbon capture and storage (CCS).Post-combustion capture is a technology to separate carbon dioxide from the uegas after the combustion for efficient transport and storage. The steady state operationof coal fired power plants with post combustion capture has already beenthoroughly investigated on a pilot scale, however much work remains to investigatethe plants dynamic operation.
Förluster av nedströmsvandrande fisk vid turbinpassage : En fallstudie för att främja den småskaliga, såsom storskaliga vattenkraften
The expansion of the Swedish hydro power has contributed positively to the reduction of the environmental impacts from the fossil fueled power production. In the same time the extensive expansion has been proved to cause negative ecological and local environment impacts of a stream. This, in turn, has been affecting the biodiversity and fish stock negatively, which has been reduced. One of the underlying problems is the lack of possibility for the fish to pass the plants, but it is also directly correlated to the mortality rate of the fish passing through the turbine, which this study is investigating.The mortality rate has been computed for three different locations in Sweden, Untra, Tännfallet and a third one whose location is confidential, and is denoted as Case 1, 2 and 3. The model used to calculate the mortality rate in this investigation is based by existing blade strike models and knowledge and are investigating the death due to mechanical injuries from collision with a runner blade in the turbine.
Islastens inverkan på brottsannolikheten för glidning och stjälpning av betongdammar
There are many old dams in Sweden and, since few dams are constructed today, the main task in risk assessment on the existing dams is often to reduce the risk of failure. RIDAS (Swedish Guidelines on Dam Safety) is used when designing new dams and assess the existing ones. The guidelines include stability requirements for different failure modes, e.g. overturning and sliding, which imply that the load effect from e.g. uplift and ice load need to be less than the resisting loads or moments.
Styrketillväxt med hjälp av vibrationsplatta
Abstract 1.The purpose of this study was to investigate the effects whole body vibrations on maximal strength, power output and neuromuscular activity in m. pectoralis major during bench press.Participants consisted of 35 male and 9 female military high school students (m=23, 1 years). On the basis of initial maximal performances in bench press the participants was divided into two experiments groups and one control group. Intervention groups performed a specifically designed push up program on a vibrating plate respectively a step board during 12 weeks Initial load at 60 % of 1 RM showed an average of 46, 5 kg. All groups showed an average increase of 13 kg for each person after 12 weeks.
Markberedningsresultat och plantbildning med såddaggregaten Humax 2-4 och KSM-såddskopa
Fördelarna med skogssådd är bland annat att de kan ge stamtäta bestånd med potential att producera träd med bra vedegenskaper och bättre utvecklade rotsystem samt att sådder har en högre biomassaproduktion per ytenhet jämfört med planteringar. Nackdelar som kan nämnas är att de ofta täta förbanden ger ökade kostnader vid eventuella röjningar och att föryngringsresultatet är mera osäkert för sådd än för plantering.Mekaniseringen av skogssådden startade under 1970-talet. Humax och KSM är två kranspetsmonterade aggregat för skogssådd. De har utvecklats för att användas på marker med svår ytstruktur där dragna såddaggregat som harv och högläggare har svårigheter att skapa tillräckligt mycket lämplig såddbädd på grund av att aggregatet inte kommer ner mellan hindren eller att basmaskinen inte klarat av att köra över hela arealen. Fördelen med KSM och Humax är att aggregaten är kranspetsmonterade vilket gör att föraren väljer var aggregatet skall markbereda och på det viset kan markberedningen göras mellan hindren samt att kranarmens räckvidd gör att basmaskinen inte behöver köra över hela arealen som skall markberedas.
Transit Objekt
Transit Objects In the Master Essay I argue around two existing levels in the works presented at the graduation exhibition. On the one hand, it is about influence; on the other hand it is about the phenotypes of purpose-ness. In the introduction, I describe the relationship between the shapes that I have come to call Transit objects, and their on the one hand ideological superstructure; on the other hand, the different aspects of their shapes regarding the imitation I, in creating the objects, performed. In the case with the objects shape-aspects, I stand on the thoughts that I found during my bachelor's work, that is, to express the phenotypes of purpose-ness.When it comes to influence, I speculate about how linguistics, and particularly a branch called neuro-linguistics, illustrates how the arguments that make up our world can be transformed. I use a meta-model and a conversation model as a tool to illustrate this. When I, like that, illustrate the plasticity of meaning, and cognition, I note Catherine Malabous taught (in her book What Should we do with our brain?) on the plasticity of the brain in relation to the neo-liberal systems of capitalism. She argues for how the brain has come to stand model for the organization of different types of networks. I hint the link to a future scenario where the desire to influence takes new forms and uses the latest brain research challenges, more specifically the use of ultrasound for the treatment of pain and other similar conditions. This also can be used as generating various types of seizures, pleasant or unpleasant.