The government regulations for energy use in buildings will be tightened in the future. At the same time the interest in environmental classifications and certifications of buildings is increasing. This has meant a new situation for solar energy. The designs of solar heating systems are often based on experience and/or rules of thumb, rather than calculations and simulations. This thesis examines whether simulation tools, in this case Polysun, are useful in this work.

En undersökning om möjligheterna att använda återandvändningsbara pallband och de ekonomiska förutsättningarna för detta. En genomsökning av vad som finns på marknaden. Beräkning av de krafter som enhetslasten kan utsätta pallbanden för. Utveckling av egna förslag till återanvändningsbart pallband med snabbspänne och bandning på tre sidor. En översikt av de positiva och negativa effekter som blir vid ett byte från dagens bandning med PP-band till ett återanvändningsbart pallband.

Detta examensarbete är utfört hos Swisslog under våren 2013. De hade problem med den manuella styrningen av deras pallstaplingskran för höglager, som upplevdes ryckig och svår att kontrollera vid låga hastigheter.Huvudsyftet var att undersöka varför detta fenomen uppstod och hur det kunde lösas med både hård- och mjukvarumässiga metoder. Utöver detta undersöktes hur produktionskostnaden, för delarna av kranen som rör den manuella styrningen, kunde reduceras.Det upplevda fenomenet är känt som biodynamic feedthrough. Det innebär att konstruktionens acceleration matas genom operatörens kropp och skapar en återkoppling till styrdonet, i detta fall en joystick. Operatörens hand ger en oavsiktlig störsignal som gör systemet instabilt som i sin tur skapar en oscillation som ökar i amplitud och är svår eller omöjlig att stoppa.Den föreslagna lösningen är att digitalt lågpassfiltrera styrsignalen från joysticken.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The purpose of this project was to design an adjustable gutter bracket for Lindab Profil AB. Lindab currently manufacture a gutter bracket that is adjustable in angle, however, this model has some drawbacks.  One of it´s shortcomings is that it is somewhat difficult for the customer to mount.  Another problem with Lindab?s current model is that the design makes manufacturing unnecessarily complex. The new gutter bracket, that we have constructed, does not have these problems. It is adjustable for different roof pitches.

The Swedish Transport Administration manage nearly 4,000 railway bridges in different condition and age around the country. These bridges is in constant need of maintenance and requires continuous inspections. This thesis is designed as a damage investigation on a single-track railway bridge south of Solvarbo in Säter municipality. The railway bridge is in operation and serves over 10,000 trains a year, everything from speed trains to freight trains. The bridge is built as a beam bridge, simply supported over a road.

The requirements for wastewater treatment plants (WWTP) are gradually increasing, partly because of higher incoming loads, which in turn require a more efficient treatment process. In parallel with environmental and economic goals there are also desires to lower energy consumption without compromising the wastewater treatment. Furthermore, there is a demand on WWTP´s to alter eutrophication in aquatic systems through better nitrogen and phosphorus removal. An increasing number of WWTP´s have acquired biological nitrogen and phos-phorus removal. A by-product of this type of biological treatment is the formation of nitrous oxide, which is a potent greenhouse gas.

Author Cocitation Analysis (ACA), multidimensional scaling (MDS) and Social Network Analysis (SNA), has been used to analyze and visualize the invisible college of the journal European Union Politics. The concept invisible college was first introduced in the fifteenth century, through the creation of the ?the Royal Society of London?, and it was reintroduced in the 1960:ies and the 1970:ies by scholars such as Price and Crane. It is said to have been interpreted in as many ways as there are authors who have used it. Here it has been used synonymously with the term citation network.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The interest for power and energy measurement has greatly raised with todays increasing electricity prices and enviromental awareness. In the search for energy efficient solutions, the measurements are more complex due to increasing of non linear components. Harmonics and non sinusoidal voltages put high demands on sampling and filtering. Meanwhile, the price must be controlled so the customer still will find it interesting to invest in smaller plants. ITT W&WW asks for a robust, heat resistant power meter with compact dimensions to allow mounting inside the casing of a pump.

The Kedertruss is the loadbearing part in the Keder weatherprotectionsystem and it has been analyzed concerning its loadbearing capacity. The Kedertruss is produced and manufactured by Wilhelm Layher GmbH & Co. KG and this report has been made for their Swedish division Layher AB.  The Kedertruss, designed in Germany according to German designcode, has been recalculated concerning Swedish conditions according to Eurocodes and a ongoing European standardization project. The two-dimensional program Winstatik Frame Analysis has been used for evaluation of load effects. Capacity has been calculated by hand-calculations and it has been verified that the Kedertruss in its larger spans isn?t able to withstand the loads.

The purpose of this thesis is to examinethe possibilities for adding a floor to anexisting building using the two materialswood and sheet metal profiles as the loadbearing structure. An apartment buildingfrom the 60s has been used as referencehouse. Two different suggestions for thedesign are presented in the rapport. Oneof them has been analyzed with wood andsheet metal as the load bearing structure.Using the old constructional calculationsand blueprints of the existing buildings,the load bearing capacity has beencalculated. In the calculation programFEM-Design the building has been testedwith the loads that an extra floor wouldgive.

The Swedish Transport Administration manage nearly 4,000 railway bridges in different condition and age around the country. These bridges is in constant need of maintenance and requires continuous inspections. This thesis is designed as a damage investigation on a single-track railway bridge south of Solvarbo in Säter municipality. The railway bridge is in operation and serves over 10,000 trains a year, everything from speed trains to freight trains. The bridge is built as a beam bridge, simply supported over a road.

The use of a bit in the mouth of a horse is being increasingly questioned with respect to its actual function, and is sometimes judged an obsolete instrument of control with potential to injure the horse. The objective of the research presented herein was twofold; firstly, to investigate the actual pressure load in the mouth of the horse with regard to oral health issues, and, secondly, to investigate whether this could be a viable method to objectively measure strength exerted by a rider/driver to the mouth of the horse especially with regard to training regimes. From the results, it is evident that these newly developed sensors have a future in equine research, although they are still under development. They can be useful both as a pedagogic teaching instrument, providing instructor and pupil with instantaneous, objective feedback on the contact between hand and mouth, as well as an aid in measuring pressure loads from our common bits. .

The Anybus CompactCom modules are today using the Anybus NP30 processor. These modules are used for communication between industrial machines and larger network protocols. The communication loads on these systems are increasing every day and the limiting factor for the system is the processor.HMS, the company that develops the Anybus CompactCom, has shown interest for a benchmark test between the old processor and a new processor, ARM Cortex-M3. This project includes that benchmark. To be able to get results that reflect reality a test environment was created to simulate Anybus CompactCom conditions.