The purpose of this essay is to describe how Boverkets Byggregler has affected the cost ofnewly built houses from 2003 to 2012, to Boverkets Vision 2025. The purpose is also to findagent-principal relations in the construction sector.When investing in an energy efficient house the operating Costs are reduced compared to aconventional house. But due to the lower operating Costs, the investment cost rises. In thisstudy, we find out if it is economically viable to invest in an energy efficient house comparedto a conventional house from the customer's perspective.The study's approach has been qualitatively where we in collaboration with Derome Hus hadaccess to three conventional reference houses and a passive house and data that was necessaryto conduct viability assessments on houses. We conducted five interviews with people fromDeromekoncernen and Varbergs kommun.The calculation methods we have used in this study are present value method, annuity methodand a sensitivity analysis.

At present day there are several different methods for measuring of paved surfaces.The most common methods today are measuring with a total station, the GlobalNavigation Satellite System (GNSS) and terrestrial laser scanning (TLS). Recently thedevelopment of unmanned aerial vehicles, known as drones, has increasedexponentially and today there are several ways of using drones for measuring surfacesby photographing and laser scanning.This thesis contains a comparison between the methods terrestrial laser scanning(TLS), and unmanned aerial vehicle photogrammetry (UAV). The measurements havebeen applied on two different test surfaces, one of asphalt and one of gravel. Thepurpose of the comparison is to investigate whether the airborne photogrammetry isequivalent accurate in its height levels as the terrestrial laser scanning. For thecomparison to be more extensive, these two methods have not only been comparedin precision but also in the areas of ease of use and economy.The precision was analyzed by comparing the height levels in randomly placed controlpoints on the test surfaces.

AbstraktTitel: SUHF-modellen Nivå: C-uppsats i ämnet företagsekonomiFörfattare: Ann-Sofie MagnussonHandledare: Jan SvanbergDatum: 2013 ? juniSyfte: Syftet med studien är att utforska hur SUHF-modellen är uppbyggd och om övergången till SUHF-modellen har lett till att forskningsfinansiärernas förtroende för lärosätenas redovisning av indirekta kostnader har förbättrats.Metod: I studien har en hermeneutisk kvalitativ metod med förstående epistemologi använts. Metoden innehöll en induktiv empirisk prövning av problemformuleringen. Den induktiva empiriska undersökningen bestod av semi-strukturerade intervjuer med fyra lärosäten och fyra forskningsfinansiärer.Resultat och slutsats: Studien visar att SUHF-modellen inte är tillräckligt tydlig när det gäller gränsdragningen mellan vilka kostnader som är direkta respektive indirekta. Kommunikationen och samarbetet mellan parterna har ökat.

Every year, thousands tons of edible food are discarded by the grocery stores. This is food that could have gone to people that?s in need of it. In many countries, so called food banks are established in order to supply welfare organizations with this kind of food. Today there is no equivalent system existing in Sweden.

The feed is a major cost in the dairy production and there is a constant interest in findingalternative cost-effective feedstuffs. Competitive dairy producers have to seek ways todecrease their production Costs and the pursuit of cost-effective feed rations contributesto lower Costs of production. An interesting group of protein concentrates are rapeseedproducts like ExPro (heat treated rapeseed) which have during the autumn 2008 andspring 2009 been very favourable compared to other protein feeds.This study focuses on the feedstuff products ExPro and Raps-Drank 60/40 (rapeseeddistillersgrain). The potential use of ExPro in dairy cow feed rations are also explored.ExPro is a well known feedstuff but Raps-Drank 60/40 is a relatively new product andnot known for many farmers.A field study on the use of rapeseed products was made on a limited number of dairyfarms. The main purpose was to study the management of the feedstuffs on the farms.The Farms were selected in cooperation with two local extension services.

Titel: E-learning - en form för kompetensutveckling? Författare: Emely Andersson Helena Någård Handledare: Anders Nilsson Institution:Institutionen för Ekonomi och Management Blekinge Tekniska Högskolan Kurs: Magisterarbete i företagsekonomi, EFE 610 Syfte: Syftet med uppsatsen är att kartlägga de faktorer som ligger till grund vid valet av e-learning som kompetensutvecklingsform samt vilka olika verktyg av e-learning som finns. Metod: Insamlingen av data har skett genom både personliga intervjuer och e-mail intervjuer med företag som använder någon form av e-learning i sin verksamhet. Vi har också varit i kontakt med sakkunniga som har erfarenhet av e-learning för att få ett bredare perspektiv på området. Slutsats: Slutsatsen vi har dragit är att det beror på flera olika faktorer om e-learning passar in i företaget och varje företag måste utvärdera dessa faktorer.

Every year, thousands tons of edible food are discarded by the grocery stores. This is food that could have gone to people that?s in need of it. In many countries, so called food banks are established in order to supply welfare organizations with this kind of food. Today there is no equivalent system existing in Sweden.

Transportation represents 10-15 % of wood supply Costs. It is therefore important to improve efficiency in the transport system to decrease these Costs. The aim of this study is to map the timber vehicle routing processes used by a sample of timber hauling contractors and to identify possible links between the vehicle routing process and service and economic variables. The study was carried out at Södra Skog in autumn 2008. 15 timber hauling contractors were sampled and interviewed about their work with timber transports.

For hundreds of years the scientific journals has been the foremost tool for scholarly communication. Publishing of research results is very important for scientists. Often the research is bound to the university and the research libraries supplies the scientist with all journals needed. The last decades the libraries have seen the Costs for subscriptions to journals explode. Commercial publishers often lie behind the mostly unmotivated escalation in price.

pelago. There is an old inn that is located on the island that has become a very popular attraction in the last couple of years. The inn has both a well-known restaurant as well as conference facilities that are used by tourists as well as the people of Stockholm over the summer months. The inn was built 1908 and has since remained in the same condition.make islands in the archipelago more environmentally friendly and promote sustainability. One of their project islands is Grinda.

Titel: E-learning - en form för kompetensutveckling? Författare: Emely Andersson Helena Någård Handledare: Anders Nilsson Institution:Institutionen för Ekonomi och Management Blekinge Tekniska Högskolan Kurs: Magisterarbete i företagsekonomi, EFE 610 Syfte: Syftet med uppsatsen är att kartlägga de faktorer som ligger till grund vid valet av e-learning som kompetensutvecklingsform samt vilka olika verktyg av e-learning som finns. Metod: Insamlingen av data har skett genom både personliga intervjuer och e-mail intervjuer med företag som använder någon form av e-learning i sin verksamhet. Vi har också varit i kontakt med sakkunniga som har erfarenhet av e-learning för att få ett bredare perspektiv på området. Slutsats: Slutsatsen vi har dragit är att det beror på flera olika faktorer om e-learning passar in i företaget och varje företag måste utvärdera dessa faktorer. Genom att titta på olika företag har vi hittat vissa gemensamma faktorer hos dessa företag. Huvudfaktorerna som har störst betydelse för om e-learning passar in i företaget är personalen, kostnaderna och vilka kunskaper det är som skall förmedlas.

The automotive industry is increasingly studying lightweight solution in their designs, also rational production and low Costs in materials and manufacturing methods are of great interest. This thesis consisted in the practical evaluation of anchors for sandwich panels. The object was to study loads of shearing and pull out of the plane. The experiments were carried out on panels made up of 1mm aluminium coatings and 50mm extruded polystyrene (XPS) at its core. As the fasteners used simple methods such as blind rivets, screw and glue.

This examination work is the final work in our education to become a Bachelor of Science inMechanical Engineering by the University of Lund.The main purpose with this work has been to develop a new effective material handling system for TPPM AB in Lund since the existing system starts to become out of date. The future system that is going to be installed shall have the capacity to support all machines with unit-, semi- and finished goods during full production. The work has also included studying the possibilities to change the material flow in a positive way between the storage and the production when one is using existing buildings.During our work we have been used a simulation program called AutoMod, performing company visits, interviews and reviewed internal and external information to create a picture of what the best conclusion can be. During the work we have contacted five suppliers to receive system solutions and quotatioris. The suppliers, which have been contacted, are Swisslog, Moving, Rocia, Christensen & Hansen and ABB.

The purpose of this thesis is to find means of control that secure cost efficiency regarding the accommodation for the employees on missions abroad of the Swedish Ministry for Foreign Affairs. Today the ministry?s cost for the employees? rented housing is 100 million SEK and there is a need of improvement in the control of these Costs. A work method for organizational development will be used in order to reach the findings presented in the thesis. First we study the strengths and weaknesses in today?s control system.

The thesis is an examination of the methods that are appropriate and long-term choice to obtain clamping force and secure screw joints in production. The employer, Scania CV AB, transmission manufactures axle gears to all trucks produced in Södertälje. One of the most common assembly elements is screw joints, where the clamping force is essential to achieve a secure joint. Current methods to secure the joint is due much of the friction effect and is an indirect method to measure the clamping force. The clampforce accuracy becomes more widely with torque angle control.