According to FSC (Forest Stewardship Council) shall at least a mean of 10 trees per hectare including riparian zones and other areas with high biological values be left in final felling. In addition large clear areas should not be created and all retained trees with high environmental value shall be spared. To leave trees in final felling means a lower cutting volume and hence a lower income from the cutting, but it also means that the production in the next generation becomes less because of competition. The aim of this study was to evaluate the effect retained trees have on the production in the new generation of forest, and to investigate if there is any way to lower this effect. The environmental care has also been estimated by the amount left in final felling.

My aim in this case study has been to create a method for creature design to test this method in a production and evaluate the results. To achieve this I studied and analyzed the methods of three concept artists and illustrators named James Gurney, Neville Page and Iain McCaig. From the analysis of these artist´s methods, combined with my own personal experience, a new method was formed. To test this method a creature was designed based on directives given by a game design group in the process of creating a table top role playing game in a fictitious world. These directives where given for the creature´s role and its living conditions.

This report is focused on marketing opportunities for small-scale mango farmers in the Nyanza Province in Kenya. Kenya is a large horticultural producer in the world. Horticulture is an important income for a large share of the rural population in Kenya but profitability is low due to inefficiencies in marketing systems and poor infrastructure. The conditions for growing mango in the Nyanza Province are very beneficial and there are two harvesting seasons. Mango offers good income opportunities for small-scale farmers in the Nyanza Province.The aim of this study is to identify marketing conditions that will enable prospering business for small-scale mango farmers in the Nyanza Province, Kenya.

In the last decades, lean production has proven to be one of the most important organizational paradigms in manufacturing. The lean concept has also spread into the service industry where it is applied within a range of different areas. The wide applicability of lean principles has spurred the authors of this study to apply the principles in the context of the operations of a Swedish remand prison. The thesis examines the process a client of the remand prison Häktet Kronoberg goes through from the time of arrest until he/she is released or convicted and transferred to jail. Based on lean tools and principles, the thesis maps and analyses this process.

Organic material used for biogas production can also undergo other treatments. The emissions and impact from the different treatments are evaluated in this environmental assessment, with a focus on energy and climate. The materials included in the study are organic household waste, slaughterhouse waste and liquid manure. Other than biogas production, the possible treatments for organic household waste and slaughterhouse waste are incineration and composting, and for liquid manure storing and spreading. The analysis is based on data and information from current and relevant literature, and relates to the conditions in the Swedish energy system.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.

The competition for Norway spruce pulp wood in Central Sweden increases, forcing the supply-structure of Holmen to face two important challenges. Firstly, it is of the outmost strategically importance to secure the long-term supply of Norway spruce pulp wood to the industries. Secondly, Holmen desires to increase the obtainable volume of Norway spruce pulp wood. This would enable the company to choose volumes in the lower price-segments and thereby decrease the dependency of costly marginal volumes. As this work shows, one part in managing these challenges could be to lower the quality standards concerning root rot (Heterobasidium annosum). Facts presented in the work shows that: 1. Technically, the TMP-industry of Braviken can handle a much more rotted pulp wood than that used today, although the cost of refinement increases.

This study investigates if and how grammar instructions and exercises in Spanish textbooks have evolved during the last thirty years. More specifically it focuses on how the grammar is presented (explicit instruction) and on the nature of the exercises (input, production and interaction). The method for investigating these things is firstly an analysis of the explicit instruction, and secondly a quantitative study of the exercises. The number of textbooks analyzed in this study is four and only the chapters that focus on teaching the preterite are included in the analysis. The result shows a tendency towards direct explicit instruction and controlled production practice.

The main aim of this study was to investigate and compare different methods for the extraction of forest fuel from environments close to an archipelago. The study was based on relevant literature and published reports as well as personal communications. Forestry has traditionally been characterized by intense efforts to rationalize and mechanize the cutting technique used for timber and pulpwood. In line with the increasing importance of forestry, more concentrated efforts can be expected in the area of techniques and methods, especially for the above-mentioned product lines. In Sweden, forestry is of major importance and the Swedish economy and standard of living have mainly been created based on the revenues generated from it. Thus, it is vital that Swedish forests are harvested in an efficient and responsible manner. The demand for biofuel is growing and today accounts for 15% of total Swedish energy production, a share that will probably increase. This study is based on three research questions, which are described under the heading of Aim. The results reveal that the most profitable method for handling forest fuel is the traditional one, which is also the most commonly used method in southern Sweden, namely the stockpiling of logs in a clearing by means of forwarders followed by splintering at the place from where they will be distributed. Today, the high cost of barge transport required for the extraction of forest fuel in an archipelago environment renders such operations unprofitable.

To investigate effects of nitrogen on in-lake CO2 and CH4 production during winter, three pair of lakes was subject for a fertilizing experiment in which one lake in each pair was fertilized with nitric acid (HNO3) directly into the water column in the summer of 2012. The lakes in each pair are assumed to be morphologically, hydrologically and biologically similar, that is, the non-fertilized lakes are considered references. The pairs do differ in one major way by being progressively less humic, going from around 25 mg/l to 10 mg/l DOC. Sampling and analysis was carried out at the end of the frozen period in 2013. Results show a significantly higher concentration of both CO2 (p<0,001) and CH4 (?=0,1, p=0,053) between impact and reference sites in the two less humic pairs.

During the 1970?s the interest for quality management and the concept of quality costs increased considerably. Business leaders noticed that there was a great potential for reducing costs of poor quality. Since up to 10-30% of a company?s total turnover may consist of poor quality costs some consider them as an unexploited goldmine.

Textil- och konfektionsindustrin blir alltmer globaliserad och ställs inför hårdare krav då konsumenterna efterfrågar allt billigare varor i snabb förändring. Sedan flera decennier har europeiska konfektionsföretag flyttat sin tillverkning till länder med lägre arbetskostnader för att uppfylla kraven om låga priser som europiska tillverkare har svårt att uppfylla. En stor del har flyttats till Kina men även till andra länder i Asien. Nu håller marknadsförhållandena på att förändras igen genom tillväxt- och utvecklingsländernas starka utveckling. Förändringarna syns tydligast på Kinas marknad genom stigande priser och mindre kapacitet för europeisk produktion.

This master thesis sets out to compare the different public transport modes in Stockholm city.Both energy consumption and air pollution are compared. The chosen transport methods are car,bus and metro.Traditionally the rail industry has had environmental arguments as a strong competitiveadvantage when it comes to passenger transportation. However, in recent years the automotiveindustry has been getting more positive media attention regarding environmental issues, forexample Roger Kemp?s statement that the car is the most environmental friendly passengertransportation mode in the UK. This study will show the environmental advantages of railwaytraffic in cities.The energy sources of the world are not endless and the use of the different sources affects theenvironment in different ways.

Increased resource efficiency in an energy system could result in large economic and environmental benefits. Tekniska verken i Linköping AB (Tekniska verken) is responsible for the district heating network in Linköping. Their vision is to create the world?s most resource efficient region. An important step towards this vision is more efficient usage of produced heat, something which could be achieved through integration of a seasonal heat storage in the energy system.

In order for construction projects to be completed within the specified time limit while at the same time be financially sustainable it requires thorough preparation and an extensive planning. Most essential is the groundwork and the design that determines the project's progress. There are many aspects to consider in order to avoid inconveniences such as delay, litigation, unexpected cost etcetera. If mistakes are made in an early stage it is very likely that the error will follow the process and become an expensive correction cost towards the later part of the project. In other words, it is expensive to rectify defects later on.