Sök:

Sökresultat:

1968 Uppsatser om Cost-effectiveness - Sida 8 av 132

Design och implementation av konfigurationsverktyg för funktionsblock

Abstract In high voltage substations there is an increasing demand for computerized equipment, and automation of operation and supervision. The future primary equipment will provide the possibility to collect more information and to provide better control for improved effectiveness. Since ABB has got a large customer target, each product must be custom made to fulfil the customers (often from different countries) demands. Later these products will be configured by engineers who may not be familiar with the tools used at ABB. This is a very expensive and time consuming.

Yrke: Operaproducent : En studie av operaproducentens roll och betydelse i Sverige 2008

ABSTRACTSofie Haag: Yrke: Operaproducent. En studie av operaproducentens roll och betydelse Sverige 2008. Uppsala universitet, Institutionen för musikvetenskap, 2009.The aim of this essay is to provide a better understanding of the role of the Swedish opera producer (often called "production manager") and the opera organisation in which he/she works. Very little has been written about this role, in Sweden as well as internationally. To fill this apparent gap, this study presents the results of inteviews with representatives of ten of Swedens´opera organisations, as well as three case studies.

Drivarens produktivitet vid lossningsarbete :

During the last few years the harwarder has developed from a prototype into a market product. Holmen Skog owns two harwarders and uses two more owned by entrepreneurs. In previous studies it has been shown that the harwarder was a slow and expensive forwarder. In this study the unloading at road-site was studied. The goal was to describe the differences in time consumption between unloading two-sided or single-sided (only from side of the road) and also the difference between unloading with three and four assortments in the carrier.

Utvärdering av samtalsmatta som kommunikationsstöd i grupp för personer med Huntingtons sjukdom

The purpose of the study was to evaluate the function of TalkingMats in a group of people with Huntington?s disease, with main focus on theeffectiveness of communication. Four individuals with Huntington?s diseaseand their group leader participated in the study. The group was videotapedduring four sets of conversations; two with and two without Talking Mats.

Betjäningskostnader i olika distributionskanaler: En fallstudie av ett svenskt bokförlag

In a time of economic turmoil and financial crisis profitability matters rise higher and higher on company agendas. Many companies are pressured to find profitability to avoid layoffs or even bankruptcy. Profitability essentially depends on the margin on the product or service sold and the costs associated with selling these products or services and hence these areas are of vital importance if companies are to improve profitability. Previous research has focused, for the most part, on product profitability while customer profitability has received less attention. This study is based on a case study of a Swedish publishing house and aims to investigate how the company?s Cost-to-Serve varies between its distribution channels.

SCA Skogs arbetsmetoder för att fastställa nyttan av en väginvestering

The basis of road investments is to minimize the transportation cost. The forest industry wants roundwood to be available during the whole year. One way of determine which road to invest in is to do a cost/benefit calculation. SCA Forest lacks a uniform approach to determine the utility of a road investment. The goal of this report is to describe how the organization works today and find areas of improvement. The data collection was done through interviews.

Brandteknisk dimensionering av oskyddade träförband : En jämförelse mellan Eurocode 5 och alternativa metoder

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Avskaffande av revisionsplikten : -         Alternativkostnader som kan uppkomma för de mindre företagen

This essay deals with the topic options costs and whether such costs would arise for smaller companies now when they have the opportunity to choose not to have an auditor. Small companies are defined as companies that fulfill at least two of the following three criteria?s: less than 1,5 million SEK in balance sheet, less than three employees and turnover less than 3 million SEK. The decision regarding internal revision does not only affect the company itself but also other parties such as the taxation authority, banks and others that can be influenced by the decision. This essays main focus is on the influenced parties, especially the taxation authority and the banks as these have been highlighted in debates in media and because the small companies themselves may have difficulties to foresee the consequences of the new changes. The opinions from accounting companies will be considered in the essay as they can be considered as experts regarding the different aspect within this area.

Konstruktion av efterbehandlare

The purpose of this report is to examine various roof structures that can operate in a warehouse with large spans. The building that is examined in the report is currently under construction, and the roof construction has already been selected. The selected roof system will therefore be compared with some other structures and materials that have been possible. The report will evaluate three different frame materials, two insulating barriers and two overlaying materials. Another important part in major construction projects is the roof safety.

Vad kostar ett vunnet kvalitetsjusterat levnadsår? En cost-utility-analys av en ickefarmakologisk blodtrycksbehandling

Samhällets resurser är begränsade och en prioritering av olika verksamheter nödvändig. Cost-utility-analysen är en typ av ekonomisk utvärdering som syftar till att utgöra en del av beslutsunderlaget vid prioriteringsbeslut. Uppsatsen gör en cost-utitlity-analys av den ickefarmokologiska hypertonibehandling som genomförts vid Vindelns hälsocenter på individer där traditionell behandling inte haft önskvärd effekt på blodtrycket. Det sänkta blodtryck deltagarna på internatet erhöll minskar riskerna att drabbas av hjärtinfarkt eller stroke. Cost-utitlity-analysen inkluderar både till behandlingen relaterade kostnader och inbesparingar samt framtida till behandlingen orelaterade kostnader, som en följd av att individiden lever längre när riskerna minskar.

Underbart är kort?: En utvärdering av reklam- och upplevelseeffektivitet vid reducerad reklamtäthet i TV

The high and seemingly increasing degree of consumer avoidance and disliking of television advertising breaks should raise many questions for commercially financed television networks as it can be argued that benefits sought by both viewers [seeking a fulfilling viewing experience] and advertisers [seeking advertising effectiveness] are eroded by this effect. This thesis studies effects on advertising effectiveness [RecallBRAND; AttitudeBRAND; AttitudeAD] as well as on the viewing experience [SatisfactionPROGRAM/CHANNEL; Attitude PROGRAM/CHANNEL; IntentionPROGRAM/CHANNEL] given a reduced degree of advertising clutter. By conducting an experiment two breaks are compared, one having the standard primetime nonprogram time units (5 min and 30 sec *3?16minutes/hour) and the other the standard nonprogram content cut in half (2.45 min *3 ?8min /hour).Results show that the reduced breaks award advertisers with higher commercial effectiveness. Measures of RecallBRAND demonstrates no differences between the standard and the reduced break, implying a significantly increased likelihood to be recalled and an equivalently lowered risk to be forgotten in the reduced break.

Uppföljningsarbetet av efterkalkyler på Portsystem 2000 AB

This thesis is carried out at Portsystem 2000 AB who manufactures and markets industrial doors and docking systems. The background to this thesis is that the company?s management considers that their follow-up process of cost accounts is not fully functioning.The aim with this report is to investigate and describe the present procedure of the follow-up process concerning the time of operations and come up with suggestions for improvements. This thesis is performed within the range of the following areas: Information systems, quality, processes and cost calculation. The main method we used were semi structured interviews with a fairly opened framework.

Redovisningens roll vid investerings- och beslutsfattande : En studie om hur redovisning, som utformas med Cost Constraint som förhållningssätt, kan påverka investerare och bankers investerings- och beslutsprocess.

Vi lever i en föränderlig värld där aktiemarknaden är en komplex miljö. Att fatta välgrundande beslut på aktiemarknaden är svårt för investerare, som  därmed samlar in all den information som finns tillgänglig. Den redovisning och information som företag lämnar ifrån sig är utformad genom en avvägning mellan kostnader och nytta, som kallas Cost Constraint. Ytterligare en avvägning som företag använder sig av gällande upprättandet av redovisning är att inte ge ut för mycket information och därmed ?skydda? sig från konkurrenter.Studiens huvudsakliga syfte är att kartlägga och jämföra hur investerare och banker tar beslut baserat på den redovisning som företag publicerar, som kan vara påverkad av Cost Constraint.

Upprustningsmetoder för en bankropp : En jämförelse ur ett LCC-perspektiv

In recent years, the Swedish railway track system has been neglected in terms of capacity and maintenance. To adapt the existing system to current traffic load there is a great need for extensive improvement and maintenance. Shortcomings are especially occurring on older embankments running over soft subgrades. To select the most suitable method for reinforcement of the embankment, it is important to evaluate different solutions from a life cycle cost perspective. In long-term perspective, it is often shown that a method with low investment cost causes a higher maintenance cost and a shorter technical lifetime.

Ekonomisk styrning och kostnadskontroll vid IT-outsourcing

Background: Many companies have outsourced their IT-operations and their expectations of what this IT-outsourcing will contribute to the business are high. Cost cuts are not always a natural outcome of IT-outsourcing. Many companies that have outsourced their IT-operations consider it to be problematic and complex to exercise management control and reach cost control which was the purpose of the IT-outsourcing. Purpose: To describe and analyze what affect IT-outsourcing has on a company?s management control system and a company?s possibility to exercise cost control.

<- Föregående sida 8 Nästa sida ->