Today?s electrical grid companies understand that better knowledge of and information about their grid can help realize a smart grid network. One way to gain better knowledge and information about the low voltage network is to install measuring equipment on the substation transformer´s secondary low voltage side that measures the low voltage network losses for that specific substation. By doing so, grid companies can, due to the calculation of the low voltage network losses, identify and address issues such as illegal power dissipation, unmeasured power outtakes, and unsatisfied technical documentation for the substations low voltage network.During 2012, Mälarenergi Elnät AB had a total electrical network loss (both medium and low voltage network losses included) of three to four percent of their total distributed electrical volume. Converting this energy volume into a monetary figure this accounts for a loss of around 30 million Swedish crowns.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

The cost of capital for traded companies is basically assessed on information from thefinancial market. Small and non-traded companies are lack of this necessary financialmarket information in order to determine an appropriate equity risk premium and tocompute the cost of capital.In the absence of financial information necessary for an external investor, it is difficult toevaluate a non-traded company with the Capital Asset Pricing model (CAPM), which isbased on the financial market information. It measures only the systematic risk, which isthe contribution of one share to the market risk of a portfolio. It is therefore important tofind models that reflect the small and non-traded companies? real business value and theirunique characteristics.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

Logistics and supply chain management in the construction sector is an area with great potential for improvements. Today, a lot of the workers time is spent on non-value adding activities. Research has shown that waste is a large proportion of the total production cost in building projects today.The purpose of this report is to analyze problems concerning logistics in the construction sector. Two of Skanska?s construction projects in Uppsala have been analyzed to identify problems.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

The implementation of large IT-systems is a complex area where many aspects have to be taken into account.KSU, Kärnkraftssäkerhet och Utbildning AB, is a small company in the Vattenfall group that is increasingly being urged to implement SAP, one of the largest ERP-systems on the market. Vattenfalls purpose with SAP is to centralize certain processes within economy that are common to all the companies in the group, this to gain benefits with economics of scale. However, KSU is not convinced that SAP is a suitable system and that the common processes apply to them.The purpose of this degree project is to investigate if SAP is a suitable system and if KSU will benefit from a transition to SAP. Three perspectives were applied to further specify important areas of the main question. From a technical point of view KSU:s demands on a system was mapped against SAP.

Are we able to help younger students to develop their understanding and their use of the capital letter, dot and question mark by giving them intensive teaching on the subject during a short period, and would the effect be long lasting?I decided to investigate this together with young students in second and third grade and at the same time try to see which grade would benefit most.By using an experimental research design I conducted the investigation in a class with children from both grades where the result was compared with two similar control groups. The investigation lasted during five months, while the students were able to show their knowledge in the subject just before and after a two weeks period of intensive teaching and then again after four months.The result showed that the intensive teaching had an effect that lasted over time and that it was the students in second grade that would benefit most. .

Syfte: Syftet med uppsatsen är att beskriva och analysera om en värdekedjetransformering som innebär att produktionen tidigareläggs medför att lönsamheten i företagsrestaurangbranschen förbättras. Vi vill dessutom diskutera de valda strategiteoriernas användbarhet för att genomföra en branschanalys. Metod: Vi använder i denna uppsats en kvalitativ metod där vi genomfört tio stycken semistrukturerade telefonintervjuer med respondenter vi funnit genom ett experturval. Ansatsen är deduktiv med vissa induktiva inslag och syftet är deskriptivt. Teoretiskt perspektiv: I branschanalysen använder vi tre strategiteorier; Five forces, Strategic Cost Management och SWOT ? analys.

The purpose of the study is to investigate and elucidate how low-cost airlines can influence and develop tourism in a region. In order to bring about the purpose the author used two research questions. Have low-cost airlines contributed to regional development? How many additional visitors have low-cost airlines contributed to Stockholm? In order to answer these questions a survey was carried out at Arlanda airport and statistics were collected. The results of the study show that there has been a regional development.

The technology used in the development of web-applications is evolving at such rate that it has become more and more important to keep web-applications modern. If an application is based on a technical platform that is not renewed, the platform may over time develop into an obstacle in further development of the application. There may be compatibility issues and some of the code may be unnecessary due to abstraction, and therefore more time consuming to work with. Sometimes the reason may be that an application has been built to run, and is running on an application server that is no longer being maintained. The system can be large and modernization can cost a lot.

This survey was made to investigate the possibility of using an alternative method of fencing inSwedish forestry. The most common way of fencing in Sweden today is made by a two meter highmetal net that is attached to turned impregnated poles. The fencing methods that have beeninvestigated is a fencing system made completely out of wood so called ?German wood fence?.Browsing of game in forest regeneration areas is often a big problem and some kind of protection ofthe plants is often necessary. There is several ways of building fences and the most common way isto use metal nets and impregnated poles, this leads to a problem when the fence has profiled itspurpose.

In this essay, we have compared a conventional house to a passive house. The housesshared the same local conditions; they have the same living area and the same layout. Thedifferences between the houses were the different construction solutions for the roof, theouter walls, the floor and the heating system. Both the houses qualify the standards fromBBR and the passive house also lives up to FEBY?s special conditions.The purpose with the essay was to examine if it really is profitable to build small hoses aspassive houses.