Sweden?s District councils and Country councils are in itself to a large extent responsible for the state financed welfare. Because of this, Sweden has a contribution- and adjustment system. The reason for this system is to create equal chance, for all District councils and Country councils, to be able to give the citizens service independently of their income and non-influential structural differences. The adjustment is built upon the so-called standard cost method, which contains four different parts.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Treatment wetlands been showed efficient for reducing pollutant in waste water. In Lajeado ? RS, Brazil the landfill has poor leachate water treatment. It is necessary to supplement the treatment plant because they need to reduce BOD, COD and nitrate of the water going to recipient. A subsurface flow wetland (SSF) can be a good choice.  In order to be able to design an efficient SSF it is important to understand how the grain sizes of a substrate affect the reducing of pollutants in waste water.

The Swedish social insurance agency provides financial support for families and children, but also for people with work injury, illness and at old age. During 2012 they saw the amount of notifications of insurance increasing in Sweden, which is a development that cost our society a great deal of money. With the aim to pursue a sustainable development I have therefore devoted this project to wellness and stress management within preschool.The employees of preschool are often dealing with a lot of stress, due to the big groups of children that causes high noise and sound levels. The high noise and sound levels is a contributor to stress which additionally can damage the health and cause impaired hearing loss. About half of the people around their forties until the age of retirement have difficulties understanding speech in large groups.The purpose of this project has been to investigate the causes of negative stress for my target group, women between 30-60 years old who works in preschool.

This paper is the result of a case study conducted at Uppåkra Mekaniska AB during the spring of 2006. The task that was presented by Uppåkra was to develop a basis for a decision for the planning activities at the company, so that in the future they can create lot-sizes which are based upon a total cost perspective. Total cost in regards to lot-sizing is defined as the sum of the administrative reordering costs and warehousing cost per stock keeping unit.To collect data a series of interviews and observations were conducted. This data was then used during the lot-sizing simulation and analysis. The 15 units that the simulation was conducted on were grouped into three item classes depending how many different machine setups they required during the production process.

Denna uppsats behandlar ett antal stigmatiserade individers möjligheter att återinträda i samhällsgemenskapen efter ett liv i missbruk eller på institution. Detta har skildrats genom individernas livsresa, från inspärrning/inskrivning på totala institutioner till det vakuum som uppstår när de blivit frisläppta eller utskrivna, och vad de därefter har för möjligheter att förändra sin identitet och bli en del av samhällsgemenskapen. Vi har inriktat oss på en verksamhet, som fångar upp personer i ett mellanläge, efter inspärrning men före samhällsintegrering. Verksamheten har till skillnad från statliga behandlingsverksamheter en acceptans för Harm Reduction. I tidigare forskning har vi beskrivit missbruksvården och den svenska narkotikapolitiken.

Scana-Booforge is a Swedish company which specialize in heat treatment of various metal. The treatments take place in quenching ovens, where fans are used to circulate the hot air. The fans used today do not have a satisfactory lifespan. This thesis aims to develop a new design of the fans for the quenching ovens, and the goal is that the new fans will bring cost savings for Scana-Booforge.The design development process started with mapping out the environment in which the fans operate, and with analysis of the existing fan structure and damages, in order to establish the cause of failure and of short durability. The performance of the fan were also established at this stage.

Today it is common to spray against most weeds by using very expensive weed-killers. The goal for every farmer is to have as low costs as possible for their use of machines and weed-killers. Therefore it is in everyones interest to find other methods to fight the weeds. Finding a way to reduce the rise and growth of weeds already at the preparation of the soil would lower the number of laps over the field and also decrease the amount of weed-killing dose. Tests show that by harrow in the dark it is possible to reduce the population of weeds with up to 60%, but the normal reduction would be about 20-30%. To verify the results above we made tests by using two different methods of preparing the soil. We tested ploughing and harrowing in daylight and during night. Later we checked the number of different weeds in areas prepared in daylight and during night. By studying the results from the different methods used we found a considerable reduction of some kinds of weeds in areas prepared during night..

When a person arrives at the emergency ward at the Uppsala University Hospital with his or her symptoms he or she explains the problems and then a priority process starts. The staff evaluate at which emergency level the patient is located in a model called Triage. The Triage model helps to decide the priority need and is based upon templates which point out in which of the 5 categories a patient is to be placed, to eliminate any future risk regarding his or her health. A lower triage level means lower priority but implies better health when the evaluation takes place. To obtain optimal effect of the Triage model the evaluation of symptoms must be reproducible so that patients with the same symptoms are placed at the same triage level regardless of whom among the staff conducts the evaluation. The purpose of the study was to see if the resources are allocated based on priority level of the patients.

A study to optimize insulation thickness for stock-, industrial- and office-buildings for external walls and roof in an economical perspective has been conducted on behalf of DynaMate. DynaMate?s role is to maintain all Scania?s buildings. Analysis has also included other parts of the building envelope, such as windows, exterior doors and industrial doors. In this thesis, three different types of exterior wall constructions has been investigated, these are a sandwich design consisting of sheet metal and a another one consisting of concrete, as well as a wall of concrete with a coating of plasters.

Title: Creating high awareness ? A study in how a company can create awareness with cost efficient marketing methods. (Skapande av hög medvetenhet ? En studie i hur ett företag kan skapa medvetenhet med kostnadseffektiva marknadsförings metoder).Authors: Alexander Edlund and Fredrik HanssonAim: Our aim is to reveal the pros and cons of cost efficient marketing and decide which cost efficient method works best in creating awareness. We also want to determine if the methods can be integrated in a successful way to achieve greater awareness.Method/Material: We have made a qualitative approach by conducting three in depth interviews with the company Bluetooth SIG?s marketing director Anders Edlund.

Ocean Thermal Energy Conversion, OTEC, is a sustainable energy conversion technology that is not yet commercialized. OTEC is a technology that utilizes the temperature difference in oceans between the warm surface water and the cold water at 1 000 m depth to run a Rankine Cycle. This technology can produce electricity and provide synergies like fresh water, air conditioning and aquaculture. A simulation program for three alternative OTEC systems has been created in order to decide which OTEC system is most profitable; closed, open or hybrid system. In this simulation a production cost analysis is performed in order to investigate and decide which one of the three systems that has the lowest production cost. The production cost analysis also analyzes if the profitability is affected by the size of the facility. After these analyzes, the most profitable of the three different OTEC-systems is expanded by an installation of solar collectors in order to see if the thermal efficiency is improved. The result shows that the most profitable system varies with the size of the facility.

This report is a result of a degree thesis at Luleå University of Technology together with Stram AB in Växjö. The project aimed to develop a size reducible bed, that gets small when folded and has a new slim design. The development of the new folding bed had the purpose to give Stram AB new ideas of how guest beds can look like and be used in the future. Information about Stram´s products and also information of other similar products on the market was gathered. A visit at a store, internet and interviews gave grater insight of the market, and of customer needs.

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.