Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

During the last few years the harwarder has developed from a prototype into a market product. Holmen Skog owns two harwarders and uses two more owned by entrepreneurs. In previous studies it has been shown that the harwarder was a slow and expensive forwarder. In this study the unloading at road-site was studied. The goal was to describe the differences in time consumption between unloading two-sided or single-sided (only from side of the road) and also the difference between unloading with three and four assortments in the carrier.

The premise for this study is the question how we should relate to people with different religious beliefs. The aim is to examine if an existence characterized by a religious diversity should affect the certainty and confidence in our faith. To answer my question I have turned to the philosophers David Basinger, Mikael Stenmark, William Lane Craig and Robert McKims different views on this issue. Using an approach based on a comparative method and argument analysis I have then assessed their different opinions in the matter. Based on my own discussion of these arguments I conclude that a religious diversity should imply a reduction in our own religious confidence and that it should be reduced in relation to the amount of disagreement that exist between conflicting religious perspectives in an specific case and matter.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

In a time of economic turmoil and financial crisis profitability matters rise higher and higher on company agendas. Many companies are pressured to find profitability to avoid layoffs or even bankruptcy. Profitability essentially depends on the margin on the product or service sold and the costs associated with selling these products or services and hence these areas are of vital importance if companies are to improve profitability. Previous research has focused, for the most part, on product profitability while customer profitability has received less attention. This study is based on a case study of a Swedish publishing house and aims to investigate how the company?s Cost-to-Serve varies between its distribution channels.

A Swedish electronics company wants to make the cooling of one of their electronic components more efficient. They propose that a retrofit liquid cooler is the way to achieve this goal. The current air cooling has high energy cost due to the high amount of power needed to power fans and heat exchangers. Using high volumes of air for cooling also leads to noise pollution. The conversion from air to liquid cooling would possibly make the operation of the electronics more cost efficient and less noisy.The purpose of this project is to theoretically evaluate different concepts of drawing the heat generated by the electronic component in to a fluid, using numerical calculations in Matlab and FEM simulations in ANSYS.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

The basis of road investments is to minimize the transportation cost. The forest industry wants roundwood to be available during the whole year. One way of determine which road to invest in is to do a cost/benefit calculation. SCA Forest lacks a uniform approach to determine the utility of a road investment. The goal of this report is to describe how the organization works today and find areas of improvement. The data collection was done through interviews.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

AbstractThe assignment were assigned by Camatec Industriteknik AB. Camatec is a Karlstadlocated consulting company, they make everything from pilot studies to complete projects in mechanical design and calculation. They even have their own patented product, Camcoil. It is a winder for steel strips and is used for example with hardening of the steel strip. The assignment has been to solve the problems encountered by some customers within this product.

Two elementary schools are now being built in Gråbo (in the municipality of Lerum),Röselidsskolan and Ljungviksskolan, which are both designed with solar thermalcollectors for the schools domestic water heating. During the summer while thelargest amount of solar heat can be generated, the activity hence the domestic wateruse in the schools are heavily reduced. Both schools are connected to the local districtheating system which makes it possible to use the solar collectors to deliver heat tothe district heating.The purpose of this thesis is to evaluate the two systems mentioned above and todetermine which system is more suitable to apply on a school. The building whichconditions were used for this evaluation is Röselidsskolan.A solar heating plant of each system type was dimensioned from the expected andknown conditions of the building. The purpose with the dimensioning was to makethe solar plants replace the ordinary energy source as much as possible.

This essay deals with the topic options costs and whether such costs would arise for smaller companies now when they have the opportunity to choose not to have an auditor. Small companies are defined as companies that fulfill at least two of the following three criteria?s: less than 1,5 million SEK in balance sheet, less than three employees and turnover less than 3 million SEK. The decision regarding internal revision does not only affect the company itself but also other parties such as the taxation authority, banks and others that can be influenced by the decision. This essays main focus is on the influenced parties, especially the taxation authority and the banks as these have been highlighted in debates in media and because the small companies themselves may have difficulties to foresee the consequences of the new changes. The opinions from accounting companies will be considered in the essay as they can be considered as experts regarding the different aspect within this area.

The low bearing capacity of roads during the spring thaw and periods in the autumn leads every year to increases costs for Holmen Skog. To reduce costs and increase accessibility Holmen Skog decided to install and test a CTI-system. Central tire inflation (CTI) is a system that makes it possible to monitor and vary a vehicle?s tire inflation pressures from the cabin, while the vehicle is in motion. When tire pressures are reduced, the area of the contact surface between the tire and the road increases, thus reducing the ground pressure. The purpose of this study was to evaluate the CTI-equipped vehicle and analyze if the CTI technology is economical defensible during the thaw 2005.