For a long time I have felt that there is a lack of time planning productson the market that attracts me to use them. Therefore I wantedto explore the possibilities of developing something that I reallywanted to use.At first I tried to come up with a more general tool for planningand structuring time, different from the products that are alreadyavailable. But soon I found it more interesting to see myself as theprimary user. This way I felt that I could experiment more and Ididn?t have to take things like production, cost and possible targetgroups into consideration.As I set out with an aim to try and understand my own problemswith planning and structuring time the project became a very personalone.

This thesis has been done in collaboration with Peab Stockholm Building 3, which is a region within the Peab Sverige AB. The report is based on a survey and studies of Peab business management systems and production literature. For general information gathering has literature from well-known sources collected in libraries and through the Internet. It shows through the work that Peab has routines for experience feedback in the construction process, but that these procedures work in a small scale and the practical work experience feedback does not work at all. This is also something the construction industry in general also perceived as problematic. The questions in the report are of a wide scale and concerns construction errors cost, how the employees perceive that the company takes advantage of the skills and the mental stress in production line. The goal is to find how Peab Stockholm Building 3 will work on the experience feedback to allow for better productivity. In conclusion, the report author tries to demonstrate what can lead to increased productivity and improved work experience..

Turning solar collectors, heliostats, is certainly not a new idea but has been explored for at least two decades. Projects on this subject have resulted in more or less realistic constructions, in a commercial point of view. Far too often the technical goals have had higher priority than the economical, which has resulted in a few constructions having the ability to compete with conventional, fix solar collectors. The economical issues have been given high priority in this project, without decreasing the demands on reliability. The system has been given the following mechanical and electronical properties: One-axis movement, fix heat carrying fluid system, microcomputer controlled movement and automatic protection from overheating.

In 2009 The National Land Survey of Sweden, Lantmäteriet, commenced a project intended to provide a new digital elevation model (DEM) of Sweden. The method chosen for the project was airborne laser scanning (ALS). In addition to information about the land surface the project will also provide information about the forest, this as a by-product. This data can be used to estimate forest variables such as height and volume. The estimates are often more reliable than what is standard today. This study is based on interviews with employees and members of the forest owner association Södra in southern Sweden.

This thesis aims to find a more cost effective model for purchasing and logistics at asmall company. The studied company is a BMX (bicycle motocross) and MTB(mountain bike) retailer. The questions to be answered are: How large parties shouldbe ordered and what mode of transportation is to be used? A literature orientation ofthe field was followed by visits to the company, obtaining information from twodifferent logistics companies and interviews of four other companies in the sameindustry. The study shows that it´s difficult to develop an optimum order quantity fora small company since there often are other factors affecting how large amountshould be ordered.

This study aims to research how small companies that operate on the Swedish home electronic-market utilize marketing communications to communicate their message. The focus of this study has been to research these companies use of below-the-line activities in their marketing communications. Interviews have been conducted with representatives from each of the three companies Neonode, Jens of Sweden and Tonium, that compose the selection from the population in this study. The use of below-the-line activities in small companies is mainly motivated by lower cost, which suit small company budgets. Below-the-line activities are also used for branding and the creation of credibility among the consumers when the target audience does not yet know the brand.

Lansen Technology develops and sells alarm systems. The communication between the system devices are wireless. The radio protocol used by the system is developed by Lansen with the purpose to be energy efficient. The alarm systems target groups are individuals, businesses and government agencies. The current system is installed, configured and controlled from a control panel for all audiences.

???This study has been made with the purpose of gaining an understanding of how a Swedish company may think and act concerning their internal control. An American body, COSO, have for some time published documents containing guidelines for how companies should go about this process, however, when conducting this study we were not aware of the extent to which companies in Europe and mainly Sweden used them. In order to learn about this, and also to gain an understanding of when these guidelines are appropriate, we conducted a case study with a large-sized, multinational Swedish company. We also conducted an interview with an expert in internal control monitoring, Anna-Clara af Ekenstam of Pricewaterhouse Coopers, in order to get the perspective of the evaluators in this process and to gain some insight as to whether our case is typical in Sweden or not. We found that our company disregards certain aspects of internal control condoned by COSO, while performing better on other dimensions.

The problems caused by the current engine casing in aluminum for Volvo Buses Corp. are the mainfoundation for this degree project. Lack of maintenance combined with a construction poorlyadjusted for assembly has resulted in the fact that the engine casings rarely get reassembled whenthe service is completed.The degree project has mainly been following ?Olssons. F, Principkonstruktion, Compendium, Lund?and ?Olssons.

At the time being there is limited experience within turbine decommissioning in Sweden and the economic effects are unknown. Despite this, there are expectations that revenues generated by sales of materials will cover decommissioning costs. The model developed identifies thirteen parameters that vary between different types of turbines and that affect the economic consequences of decommissioning. The three most important parameters are turbine location, tower material, and the scope of decommissioning. Trends in the wind energy industry show that these three factors are developing in a manner that increases decommissioning costs dramatically.

The work is conducted in cooperation with LRF Konsult. The data has been collected thru a survey involving 145 landowners in Östergötland. The study is aimed at landowners how owns at least 400 ha of land. The purpose of this study is to find out how large landowners choose brokers when they are looking to sell their property. The purpose of this work is to find "larger landowners' needs / choices of Realtors. The questionnaire consisted of 16 questions, and asked to investigate the seller's most important factors when they select brokers.

The global wood pellet market has seen a rapid growth after the adoption of the Kyoto protocol and the renewable energy incentives created within the European Union. The global consumption of wood pellets reached 13,5 million tonnes in 2010 and several experts estimate the consumption to be between 35-50 million tonnes by 2020. These forescasts raise the questions which regions that can supply this vast amount of wood pellets and what the conditions are for producing it. This study evaluates the conditions for wood pellet production and export from British Columbia, on Canada?s west coast, focusing on existing industry structure, raw material supply and the distribution chain.

In the last decades, high speed cutting has become an attractive technology in the wood industry. The possibility of reducing global costs in addiction with an increase in productivity, were the main reasons for the enlargement of the use of this technology. As usual, these advantages are accompanied by disadvantages that should be carefully analyzed. If on the one hand cutting forces are reduced with increasing cutting speeds, on the other hand, the centrifugal forces affecting the tool are higher. Exposed to such high loads, there is a considerable risk of tool failure that embeds hazards for both machine and workers.

To create a profitable and competitive business an important factor today is a well-functioning logistics. Through effective internal material flows effective logistics can be achieved. Unnecessary handling and movement of materials is a waste which affects the internal material flow. These wastes should be identified and eliminated as much as possible to improve the internal materials handling and through that achieve a more efficient business. At Fagerhults Belysning AB, where professional lighting systems are developed, manufactured and marketed, a new inventory has been built and changes in the assembly has been made during the past year.

During the second part of the 20th Century celebrities became more commonly used for commercial purposes as they could enhance purchase intentions, word-of-mouth- intentions and change attitudes towards brands and products. Over the last few years blogs and bloggers have become more and more used for product placing and the bloggers? power over consumers? behaviour has grown rapidly. The aim of this study is to compare a celebrity?s and a blogger?s impact on consumer behaviour and try to understand the underlying reasons why they do have such power over their audiences.