In the EU the amount of waste increased by 14 percent during the years 2000 to 2010. EU?s target to reduce waste generation runs parallel with the aim of increasing the efficiency and profitability aligned with energy recovery. In Sweden the energy recovery through incineration is increasing steadily, and 46 percent of the municipal solid waste (MSW) is treated by combustion. This report aims to examine the profitability of processing MSW into Refuse Derived Fuel (RDF) from an economic-, energy- and environmental perspective.

The building industry consumes approximately 40 % of the total energy consumption in Sweden, where the using stage is dominating with 80 %. There is a lot of work in progress to reduce energy use in the building industry, and the demands from authorities regarding energy use increases. As a part of this work Building and planning department of Sweden has established a requirement that has been applied since 2006, and restricts a maximum energy use for buildings.The requirement includes that an energy simulation must be done in advance to demonstrate that it is possible to meet the demands.Reality is however more complex than an energy simulation program, that frequently underestimates the energy use of buildings. The purpose of this thesisis to study and analyse deviations between estimated and actual energy use in modern apartment buildings. The study includes four apartment buildings in Stockholm, Gothenburg and Jönköping that were built in 2007-2009.

The purpose of this essay is to examine if the municipality has a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project.In Karlstad there is now (2006) a large building project in form of a shopping mall. This project is in its final stage of completion and offers me a suitable case to examine. To undertake the purpose of the essay, the following research question is formulated:Do the municipality have a real freedom of action to control the use of the land and the shaping of the buildings in a large and prestigious building project as the Mitt I City project?In an attempt to examine the project and the planning process, three themes are applied. The first theme derives from the hypothesis that the part that initiate the process gets the upper hand as future discussions are taking place in relation to the original ideas.

When the Swedish Forestry Act was changed in 1994, brushing of young stands became non mandatory. Since then the annual need for brushing in the country has increased by about 100 000 hectares per year. In later years the price for biomass energy has increased to the same level as pulp wood. The high price on biomass energy and the large areas of stands in the need of brushing has created a new market with its own technical, economical and environmental conditions. There is a development of various techniques to manage the forestry stands with late brushing.

The company Olofsfors AB manufactures drive belts for forest machinery, known as ECO-Tracks, and abrasion-resistant steel and cutting edges for graders, excavators and tractors, known as Bruxite and SharqEdges. Manufacturing these products requires the steel to be heated and molded, then submerged in water and hardened. The water used in the hardening of steel is pumped to the process from pits below the floor and then pumped back to the pit after it?s been used. Since the temperature of this water rises after being used to harden the steel the temperature of the pumping pit needs to be adjusted to maintain its setpoint of 21°C.

The Swedish Armed Forces is a public institution and consequently obliged to follow Swedish and international legislation. Thus, they are subjected to contrarious demands from different actors operating in its high-technological and high-institutional environment: to be a legitimate institution and at the same time operate with a high level of efficiency. This thesis is conducted with the aim of investigating whether The Swedish Armed Forces' steering document for gender equality is used to achieve visible and quantifiable results or if the document constitute a medium for reverberating legitimacy. To answer the research question, we applied a critical discourse analysis on the relevant documents and on the conducted semi-constructed interviews with members from different levels and positions in the organizational hierarchy. Subsequently, we came to the conclusion that the Swedish Armed Forces manage the demands for efficiency and legitimacy, which are forced upon them from the technological and institutional environment, by talking about them.

This essay is written about how the physical environment affects teachers? own learning. The purpose is to see how the teachers? work is affected by various factors, such as the uses and placement of the teachers? offices, common room, or any other places where a meeting may occur. The survey was conducted using both interviews and observations of the teacher?s office.

Energy consumption is at present a major political issue, and numerous projects that comprise many nations are currently in process to increase energy efficiency and bring down energy dependency. As a member state of the EU, Sweden now faces the challenge of implementing substantial energy-saving measures until the year 2016. One of these measures is the project ?Green Islands? financed by the EU that intend on creating sustainable islands in areas around the Baltic Sea. The Archipelago Foundation leads the project that concerns the Stockholm archipelago, where focus has been placed upon decreasing energy usage in businesses and services on Utö among other islands.

This thesis has been carried out onbehalf of Lindborg & Sons in Örsundsbroand is a concluding part of the Bachelorof Science program in ConstructionEngineering at Uppsala University. Theaim of the project is to make a plea fora database of good examples of themachine room types using Revit drawingprogram, and work out a correspondingworksheet .At the start of the process it becameapparent that there were somedifficulties in using Revit to creatingmachine room types of the variety whichthe company builds. For modelling ofoblique, curved and irregular lines, Ihad to use my AutoCAD Architecture andthen import them into Revit.The creation of calculus in Excel wastime consuming. On the other hand, it isa one-time work to create the template.The advantage of Excel is that there isno need for a re-calculation at the costof various types of machine hall. Allthat is needed is to replace the variousparameters.

More elderly, fewer hands: The way forward Sustaining the care workforce as a political challenge ? A case study of?elderly care in Kalmar Municipality This study examines how Human Capital Theory and New Public?Management are reflected in the governance of eldercare in Kalmar?municipality. Based on document analysis and interviews with politicians?and senior officials, the study shows that investments in staff competence?and well-being coexist with efficiency-oriented management practices.?Rather than being contradictory, these approaches are often combined in?everyday governance. The study concludes that the main challenge is not?funding, but capacity and that sustainable eldercare depends on aligning?national goals with local conditions and strong human capital.

The aim of this bachelor's thesis is to investigate how teachers view the way they build their relationships towards students, both in general and, more specifically, towards those students with some type of attention deficits. The focus of this thesis has been on how great an importance teachers place on this relationship. Especially when it comes to working with students with attention deficits. We also want to know to which extent this relational perspective is rooted in teachers' practice. The theoretical basis of this study is the relational perspective formulated by Aspelin and Persson (2011).

Companies and organizations need to take care of their employees? creative ability. This report gives some examples of work situations that support or prevent creativity. The purpose with this report is to investigate the link between people at work and creativity.It was necessary to delimitate the area and decide which sources to be investigated and presented in the report. The main topic is on sources of creativity, but as more organizations seem to introduce efficiency thinking according to Börnfelt (2009), the interaction between efficiency and creativity is also presented.In this report theory is compared to industrial designers? opinions on creativity.

The purpose of this report is to investigate the possibilities with drain water heat recovery (DWHR) in residential buildings. Information and relevant theory has been collected and summarized in this report. Calculations have been done for given scenarios to evaluate profits. DWHR heat exchangers use simple technology and have long life-time. The heat exchanger is connected to outgoing drainage pipe and incoming cold-water supply so countercurrent flow is accomplished.

In 2010, Airwatergreen AB started testing their new technology, the Airwaterwell, an atmospherical water generator of their own design that is running on solar heat, with a production capacity of three litres of water per day and m2. The purpose was to focus on foreign aid organizations as main purchasers for project investments towards rural communities in developing countries that suffer from lack of, or compromised quality of drinking water. In order to further understand if this technology would bring a positive impact in the developing countries, the company contacted the Swedish University of Agriculture for a socio-economic study of the Airwaterwells? potential. The authors elected Cost benefit analysis as the appropriate method for conducting the study and India became the study region because of its many problems with water related issues such as diseases as well as insufficient water supply for households. The regions that this study is based on are Gujarat, Haryana and Uttar Pradesh given their differences in income, health situation and poverty rate.

Prescribed burning was commonly used for site preparation in Sweden to establish new forests until the 1960?s, when mechanical scarification was introduced. During recent decades the interest in prescribed burnings has increased again, mainly due to certifications of forestry stating that 5% of the regeneration areas should be burned on dry and mesic soils. The objective of the study was to evaluate actual influence of prescribed burning compared to other site preparation on stand stem density, growth parameters and tree damages for Scots pine (Pinus sylvestris L.) after direct seeding and planting. The study also attempts to simulate growth until first thinning.