The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

By our employer Camatec Industriteknik AB have we been given the assignment to continue with the previous work ?Design of strip feeder?. Our goal with this work is to come up with a design basis for a strip feeder.Functionally a strip feeder consists of two rollers which with the aid of the friction between the strip and the coating on the roller create a strip force that pulls the strip through the working progress.Demands on this project:? 10 ? 600 mm in strip width and 0,1-1 mm in strip thickness.? Minimum 30m/min in production speed.? A maximum strip force on 30-40 kN.? The cost of the strip feeder?s components is to be considered of economy and quality.The need of a strip feeder occurs when the coil doesn?t manage to feed or pull the strip before or after a working process. The strip can otherwise be exposed by a permanent yield deformation or a change in the strip material if it?s pulled trough the working process only by the on ? and of-coils.

The main goal with this thesis report was to come up with ideas of how to make the use of energy more effective and thus save money for the company.First a survey was made to find out where and how the energy consumers were divided within the company. The results were then used in calculations to find out how much money that could be saved and how long it would take to get back the investments.There is a big potential in saving money by recovering heat from the UV-lamps with a heat exchanger. It would also even out the pressure in the factory which is a source to heat loss and a cause for discomfort amongst the employees. It?s possible to save 105 000 kr in a year and the money needed for the investments is 600 000 kr.By using the recovery air more effectively the company could save up to 250 000 kr a year in lowered heat purchases, but this would require the use of automatic dampers.If you reschedule the running times for the wood chipper and invest in some kind of load management, for example Sydkraft?s ?Energidirigent? you can save at least 42 000 kr.

Calesco Foil AB is a manufacturer of thin flexible circuits for heating or electric conduction.The plant is located in Kolbäck, Sweden.One of the company?s products, the conducting polymer pasta is in present situationunpredictable. Unpredictable in the way that the same type of heater shows differentresistance, depending on which time they have been produced. The desired repetitivelyprocess is almost non-existing.The aim of this master thesis is to primary identify those parameters that effects theresistance, observe and if possible to perform tests on them. The results from this analysisstand as base for recommendations to achieve a repetitive and standardized printing process.The results and the observations from the tests indicate that a repetitive process is possible toachieve.

This thesis was conducted at Linköping University and Saab Aerostructures DPS, Linköping, and focuses on the possibilities of flexible fixturing in machining applications. The thesis is part of the research project "Koofix", which is collaboration between Linköping University and a number of companies.The thesis is aimed towards small batch production which, for Saab Aerostructures DPS, means diverse part geometry and that parts are manufactured in very small numbers, sometimes just one piece. The result of this is that expensive dedicated fixtures are made for most parts. By introducing more flexible fixturing methods to this kind of production the cost of fixtures and tooling will be reduced, and make the production more efficient.New flexible fixturing methods has been presented and evaluated through the thesis, which has resulted in three different concepts. These concepts have been the result of literature screening and study of current manufacturing process at Saab Aerostructures DPS.

This review article presents the splicing process during messenger RNA maturation and how it is regulated by different Cis-regulatory RNA-sequence elements and splicing factors. A more detailed description of the process alternative splicing and its importance to the function of genes from the model organism Arabidopsis thaliana is also given. A single eukaryotic gene can by the process alternative splicing (AS) give rise to a number of functionally mature mRNA-molecules, which in turn encodes for structurally and/or functionally different proteins. During the course of evolution, the process alternative splicing has thus shown to be effective in increasing transcriptome and proteome diversity of most eukaryotic organisms. This suggests therefore that the dominant theory in molecular biology, a gene encodes for a protein, needs to be corrected.

The aim of this study about post-conflict economic, social and political reintegration of ex-combatants is to understand how such a process should be prepared for in order to help as many traumatized and sometimes destructive or disabled soldiers as possible to re-establish themselves as functioning civilians as well as preparing communities for their return. In order to do this I have focused on Africa and in particular the DDR-process of post war Sierra Leone. My study concludes that the relation between ex-combatants and civilians and the prospect of a positive future are crucial to a successful reintegration process..

The purpose of this thesis was to examine how the build-up of customer relations can be characterized at the end of the industrial selling process and how companies engage their cross-functional selling teams into this relationship building effort. Through a case study of Omega, a multinational company engaged in the selling of products of an industrial character, it was revealed that the build-up and maintaining of the customer relationship is of acute importance, as it presents the company with a window of opportunities. Through its relationship with the customer the company can be able to sell other products, which are related to the original purchase made by the customer. For the company?s competitors the established relationship might also serve as a barrier when attempting to enter the market or increase market share.

Considering that the price and demand for energy gradually has risen over the past decade and a wider discussion about the human impact on the environment has become increasingly more important and given a clearer role in modern society. This has contributed to increased incentives to reduce the use of fossil fuels and increase the use of renewable energy.The agriculture currently accounts for 20 % of Sweden's total greenhouse gas emissions. A way for an agricultural company like Wapnö AB to reduce their emissions could be to utilize existing renewable energy sources within their own premises.The report's aim is to create an energy audit of Wapnö?s existing energy system and how it changes with a future biogas plant in operation. The energy audit is used to illustrate how the company?s climate footprint could change.

Small!size!enterprises!within!the!outdoor!industry!seldom!use!a!structured!process!or!method!when!involving!users!in!product!development.!One!reason!for!this!is!that!many!structured!development!processes!are!designed!for!large!companies!with!very!different!resources.!When!involving!users!in!product!development!processes,!the!most!common!user! is! an! elite! athlete.! She! or! he! often! has! different! requirements! than! the! regular!consumer!and!in!the!customers?!point!of!view;!this!leads!to!nonCmaximized!developed!products.!!The! result! of! this! thesis! is! a! user! involvement! process! for! small! outdoor! companies!based! on! the! Sister! Kenny! Research! Center! Innovation! Handbook,! a! product!development!process,!which!itself!is!based!on!a!phaseCgate!model.!The!process!focuses!on!the!user!category!enthusiastic!amateurs,!since!this!is!what!companies!in!the!industry!require.!The!process!also! focuses!on!how!and!where! small!outdoor! companies! should!involve!users!and!give!recommendations!on!how!many!users!that!should!be!involved!in!a! product! development! process,! different! from! what! the! theory! recommend.! The!process! also! builds! on! that! ideas! should! come! from! the! users! first,! and! then! being!further!developed!by!the!company's!product!developers.!The!degree!of!communication!between!users!and!the!company!is!shown!and!the!report!clarifies!the!user!involvement!intensity!in!product!development!processes.!!The!involvement!process!that!has!been!developed!has!also!been!summarized!in!a!guide!that! can!be!used!by! a! company!on! a!daily!basis.!This! contains! information!on,! among!other!things,!how!users!are!selected!and!how!to!plan!a!workshop.!!! !.

The students participating in my development work will work with a process book for handicraft studies. In the beginning of their studies, the students need practical knowledge about the development of the profession itself, but they also need to be challenged and learn how to solve problems on their own which will help them gain a deeper knowledge of the subject.    I focus on open questions to create a process with the students. This process is created when working with Solution-Focused-Education. Through ?assessment for learning? we can help the students to improve their self-assessment and understanding of the learning process.

Denna uppsats handlar om den svenska Försvarsmaktens jämställdhetsmål som har satts upp för att främja jämställdheten och på sikt få in fler kvinnor i organisationen. Mer specifikt handlar uppsatsen om hur kvinnorna inom Försvarsmakten anser att dessa jämställdhetsmål efterlevs. Uppsatsen baserar sig på intervjuer med tre kvinnliga yrkesofficerare som får ge sin syn på livet i och runt det militära samt på försvarets jämställdhetsarbete och hur det påverkar dem. Resultaten jag kommer fram till i denna uppsats är att Försvarsmakten för dessa tre kvinnor är en bra arbetsplats för dem, oavsett deras individuella livssituationer, men att det fortfarande finns en hel del att jobba på vad gäller jämställdhetsmålen..

In process oriented organizations, it is important to have well-functioning work processes tosupport the work being performed. In order to accomplish this, the organization has to makecertain decisions regarding the design and usage of the processes. This master thesis is based ona case study of a work process that is being used for the industrialization of products at Ericssonin Katrineholm. The aim of the study is twofold. One aim is to improve the studied process byidentifying improvement opportunities and carrying out the required adjustments.

Antalet flygresor har ökat markant i världen de senaste decennierna. Detta har medfört en ökning av flygets koldioxidutsläpp som därmed har gett en ökad påverkan på klimatet. Forskning angående människors syn på och uppfattning om flyget är relativt ny och forskning rörande ämnet är mer förekommande idag än för ett decennium sedan. Tidigare undersökningar är dock i stort sett eniga om att människor, både miljömedvetna och icke-miljömedvetna personer, inte tänker ändra på sina flygvanor och flyga mindre på grund av flygets klimatpåverkan. Denna studie undersöker klimatengagerade personers flygvanor och vad de har för syn på flyget och flygets påverkan på klimatet.

This paper aims to describe the geographical changes of Swedish international aid politics since 2007, which was the year the new aid reform of decreasing collaborating countries, came up. To decrease the number of aid receiving countries due to efficiency is not a new idea within Swedish aid politics, but Sweden received criticism from the (DAC) Development Assistance Committee, saying Sweden was active in too many countries, and the government established a policy to decrease the amount of countries given aid. Despite the government?s recent work, science has shown on a failed country focusing. This is followed up in the paper trough examination of statistics to measure the extent of the reduction.