Sökresultat:
9640 Uppsatser om Cost Allocation Process - Sida 33 av 643
Tekniken bakom den digitala filmtekniken : Vilka tekniska faktorer ligger till grund för den digitala revolutionen inom den professionella kameratekniken?
This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.
Utveckling av inbyggda system med grafisk programmering
The increase of complexity in embedded programming is forcing the development of higher level programminglanguages. These languages not only consist of traditional text based programming but also with graphical programminglanguages such as the programming language G from LabVIEW which is developed by National Instruments and havebeen around since the mid eighties. However since 2004 this language has also been able to program embeddedhardware, using the modules LabVIEW SDK and LabVIEW for ARM. This thesis shows how LabVIEW for ARM converts itsgraphical language G to C and then how C is flashed into the microprocessor. The thesis also takes up the pros and consof using G for embedded development.
Utvärdering av ett större bergvärmesystem i en flerbostadsfastighet som har konverterats från fjärrvärme
This master thesis is an in-depth study of an existing heating system at a household cooperative in Uppsala that has been converted from district heating to a bedrock heat pump system. The study focuses on an economical system optimisation of the building?s complete heating system. The aim was to determine how well a heat pump system in large buildings actually work, find out possible ways to optimize the existing system and point out important system parameters for new heat pump installations in larger buildings.The project points out a possible energy cost reduction of 45 % without investment and further cost reductions with equipment investments. A reduction by 30 % is possible by improvements in the regulation system and 15 % is possible by maintaining the brine system.
Verkligheten ? Here we come! En beskrivning av socialisationsprocessen hos studenter vid Växjö polishögskola
This thesis investigates and emphasises on the way students at Växjö police academy describe their socialization into their profession as police officers and the creation of profession identity. The scientist?s main questions are: In what way do the students at Växjö police academy describe their socialization process into the police profession? What role does the organisation play in the socialization process of the police students? How do the students develop their police identity? Which qualities are encouraged? The study is based on qualitative interviews with nine police students, performed in groups of three. Group theory, role theory, and organization theory are applied to the material to provide an understanding through which it is possible to understand the process of socialization. The study shows that there seems to be patterns in the description of a professional identity.
Simulation driven design : An iterative approach for mechanical engineerswith focus on modal analysis
This thesis of 15 hp has been implemented at Halmstad University, incollaboration with Saab Dynamics in Linköping. Saab Dynamics is a companyoperating in the defence industry where competition is tough. This necessitatesnew ways to increase efficiency in the company, which is the basis for this thesis.Saab Dynamics wants to introduce simulation driven design. Since SaabDynamics engineers have little experience of simulation, required a usermethodology with clear guidelines. Due to lack of time, they chose to assign thetask to students, which resulted in this thesis.The aim of the thesis is to develop a methodology in mechanical design, wherethe designer uses the FE analysis early in the design process to develop thestructures' mechanical properties.
Markering och risning av basvägar inom slutavverkningstrakter : en intervjustudie hos maskinförare och planerare
In an attempt to prevent ground damage and to reduce harvesting costs, StoraEnso's districts Värmbodal and Fryken, selected a number of final felling areas where the base roads have been marked by planners in the districts. The parties involved in the experiment are mainly planners, harvester operators and forwarder operators. The purpose of this paper is to determine the findings of this trial and to find cost savings or lost revenue. This has been done with a sample of interviews from the involved parties who logged the chosen felling areas. Literature about the interview process has been used to facilitate data collection, interpretation and analysis of the material.
If we look at profitability based on assumed income and expenditure, revenue per MWh would be 63 SEK.
Bestyrkande av hållbarhetsredovisning : kostnad & nytta
Sustainability reports have during the last decade had a strong development. Both in terms of establishing a sustainability assurance, in its form, and get it assured together with standards, principles and regulations which organisations and accountants have utilized. The growth of sustainability reports and the choice of getting them assured have in particular favoured the accounting business. Due to this result, some critics have voiced that assuring a sustainability report gain accounting firms more than it gains the actual organisation. Other say that it is necessary in order to increase the credibility and the eligibility of the report, while it also has become a requirement from stakeholders.
IT-konsultens konsultationsprocess
How does IT-consultants reason in their consulting process regarding the development of a clients IT-based internal recruitment system? The purpose with this paper is to investigate how an IT-consultant is reasoning in a consulting process and investigate whether consultants are using established models and methods in their work. We have chosen to work with a qualitative examination to attain our purpose. In our work gathering the empirical facts we have been working with a case study, an observation and a simulation exercise. The combination of these has made it possible to carry out the paper and produce the most correct data possible.
?Ett beslut taget med hjärtat eller hjärnan?? : En beskrivande studie om donationsbeslut och processen bakom.
Throughout the years more and more charitable organisations have appeared and the competition between them has increased. This has forced the charities to use more marketing strategies in their work in order to strengthen their competitiveness. Research in philanthropy in terms of economy and marketing has been neglected in Sweden and the research that is done today is mainly focused on why individuals donate to charity. A donation, according to the writers of this thesis, has been seen as an economical activity and can therefore be explained and understood through economical models and theories. This thesis aims to see how a contributor to charity makes the decision to donate money, consequently see how the donation decision process actually works from a theoretical model of a buying decision process from marketing literature. The purpose of this thesis is therefore to from a buying decision process concerning products describe the donation decision process for contributors to charity. By achieving this purpose the writers aim to compare if a donation decision process go through certain steps similar to a buying decision process.
Lokal logistikoptimering för ENA Energi i Enköping
The cost for forestry logistics in Sweden is about 25 percent of the total cost of getting the raw material to industry (Anon., 2010). There might be much to gain by taking a look at your supply chains on the logistic side in your company. In this report the logistic chains by Mellanskog for ENA Energi AB in Enköping has been looked in to. ENA Energis plant is a combined power and heating plant and about 99, 5 percent of their fuel consisted of bio energy in year 2009 (ENA Energi, 2011, länk A).
The main purpose with this report is to look at three questions:
1. How does the supply chain look today? From forest to industry.
2.
Verktyg för värdering av miljöpåverkan vid investeringar i det svenska elstamnätet
During the period 2009-2013, investments in the Swedish national grid increase by a factor of ten compared to previous years. In order to fulfil their mission to manage the national grid in a safe, efficient and environmentally sound way, Svenska Kraftnät (Swedish National Grid) needs to take all these perspectives into account while planning new investments. To compare and relate perspectives of technology, economy and environment the same yard stick must be used. That yard stick is commonly money. A problem arises however as environmental issues are difficult to price.The purpose of this master?s degree project was to develop a tool for evaluation of environmental impact related to investments in the Swedish national grid.
Balanced Scorecard identifieringens dolda dilemma
The use of balanced scorecards have spread explosively throughout the world during the last decade. This management tool have become very common in a vide spread variety of organisations on all continents. Many balanced scorecard fails though and scorecard theorists often blame the identification- and implementation process as they claim that these lay the foundation for the use of the tool. As my literature study shows, academic research on the area is rare. Particularly the effect on the implementation process from organisational dynamics and organisational structures needs further research.
Timeliness cost for agricultural sprayers : weed control in cereal crops
Evaluation of machinery costs is necessary for selecting appropriate farm machinery. Timeliness cost due to untimely operations is an important component of machinery costs. Timeliness costs can be high for crop sprayers, since pesticide application must be carried out within a short time interval. This Master thesis investigated the timeliness cost and the probability of a suitable workday for spraying. Timeliness factors were estimated for four different crops (oats, spring wheat, winter wheat and barley) using historical weed trial data.
Demand and economic potential for working horses in Swedish municipalities
The aim of my study is to answer the question whether there is a potential for services by working horses in the Swedish municipalities. The Swedish University for Agricultural Sciences (SLU) and Swedish Farmers Union (LRF) has started a cooperation called Climate School (Klimatskolan), with the purpose to increase knowledge in environmental and climate related issues in context of agriculture. This Master thesis is in the framework of the Climate School.Global warming is a problem that gets much attention today. Global warming and climate change are two subjects that are very much in focus on the political agenda. The municipalities of Sweden have a big responsibility concerning environmental work and to develop their own environmental thinking.
Ny fast förbindelse mellan Helsingborg - Helsingör.
Specialarbete, 15 hpSvenska som andraspråk, SIS 133VT 2012 Handledare: Håkan Jansson.