Eco-design is all about improving products environmental performances throughout the products lifecycle by including the environmental aspect into the product development process. There are a large number of different tools that can be used for this, but there are several factors that can affect which one will be the best to use. Some tools for eco-design takes comprehensive studies and can only be performed by experts, while some tools can be used more time- and cost efficient and with basic knowledge. The choice of tool should be based on the company?s situation.This report describes the research of how the design and furniture company Blå Station could include a tool for eco-design in their product development process.

This report is the result of a project in the course Independent Projekt in Molecular Biotechnology at Uppsala University during the spring of 2014. The foremost purpose of the course is to give students the opportunity to carry through exstensive work in a project environment. This project was formed based on a comission from the biotechnology company SweTree Technologies, and the goal has been to compose a summary of the different techniques and methods that exist in the field of mass propagation of trees through the method of somatic embryogenesis.The project group has obtained information about the area mainly throgh reading patents, trying to find key components and bottlenecks in other companies? somatic embryogenesis technologies. This paper is divided into different sections, containing the patents of the automation of different steps in the process.

Buildings worldwide account for 40 % of the total energy use. Climate change is of increasing importance, but few are willing to reduce their standard of living or get a higher cost for the change. Energy efficiency of existing buildings gives the greatest benefit economically and environmentally. The real estate company Klövern AB manages 46 properties in Karlstad. Heating is the major cost of the total operating costs of real estate. Rising energy prices increase the need for Klövern AB to improve energy efficiency and to investigate alternative sources of heat.

This paper investigates and explains the existence of different governance structures in the Swedish film industry. Using a theoretical framework of transaction cost economics, it is shown that trust follows from frequent production projects, affecting the distributors? control of producers, cinemas, video retailers and television. Control becomes more flexible, informal and less time consuming. Furthermore, the control of the distributors? relationship with television and cinemas proves to be multidimensional and affected by transaction activities, as well as by demands from previous parties in the value chain.

Wavecraft AB develops medical equipment for heating of organic synthesises. The heating is done with microwaves, which improves the process in both speed and accuracy compared to the more traditional methods where heating elements are used. This report discusses the developement of an automatic lid mechanism for one of Wavecraft's product prototypes. The company assumes that the final product will be integrated by customers into fully automated systems, and the upgrade from a manually to an automatically controlled lid is therefore an important step in the product's developement process.The first stage och the project was an idea generation process. The ideas generated here were organized into five different concepts of which the best one was selected through the use of a concept matrix.

Ett effektivt industriellt bostadsbyggande i trä bygger på kontrollerade och standardiserade processflöden. För att visa på vilket sätt de har ett samband, har grundläggande kunskaper om proceskartläggning och processbaserad verksamhetsutveckling använts. Processen kan sedan effektiviseras och utvecklas för att i framtiden göra det industriella bostadsbyggandet ännu mer framgångsrikt. Vilket kan gynna träbyggandet både i Sverige och internationellt. Syftet med examensarbetet är att kartlägga företaget Plusshus arbetssätt från ide till färdigt hus och sedan upprätta ett förslag på en hållbar standardiserad processmodell.

Active sensors are used a lot in the society and industry, for example to gain better control over processes or to get proximity sensing features in different products. Within industry there is great interest in developing safe automation products that can be controlled with high accuracy but still at a low cost.The goal of this project is to develop a prototype of a non-contact rangefinder that measures distance using infrared light. The sensor is to be used for various applications in industries with relatively high accuracy and be compact, but at a low cost. By implementing a rangefinder into a product, more accurate detections of an object?s presence can be done.In this project a new distance sensor, EPC600 from ESPROS, was used.

The cost of construction projects have increased during the past few years. Different actors in the construction industry work together to advocate various measures to mitigate these cost increases. One of these measures is to try to improve the efficiency in the phase of production. By striving for a kind of standardization with a constant quest for improvement, the productivity can increase while the costs of production fall.For this thesis has a case study been conducted at the construction company JM AB which is seeking this. They call the approach structured production and have implemented various measures to achieve a more productive output.Based on information from reconciliations, the cost and the spent hours of craftsmen have been analyzed at the company where the case study took place.

Construction companies in Sweden have for recent years seen an increase in the numbers ofwarranty complaints associated with the market of resident buildings and the cost for this hasbeen measured to over 1.2 billion SEK per year. Working with poor quality cost as a way ofcreating insight about defects within the company?s processes is a method developed and usedby the manufacturing industry for decades, but have not yet reached the construction industry.This study has been performed in collaboration with a Swedish construction company, wherethe author has been stationed at the aftersales division for residential buildings. Owing tocircumstances, this published report has been made anonymous regarding the company whowill further on be namedthe Company. The Company is aware that warranty claims producegreat costs and has requested a way of putting cost and cause to specific claims in order ofreceiving a more specific cost view and to make the reuse of knowledge more efficient.

The Swedish production of biogas was 1,5 TWh 2011. About half of the production was used as vehicle fuels. The cost for upgrading biogas depends on the size of the biogas plant and its gas production. If the gas flow is low the cost will be high. However, further development of existing upgrading technologies or development of new ones, have good potential to decrease the upgrading cost for small scale biogas plants.

I denna uppsats studeras investeringsprocesser i det divisionaliserade företaget Södra Skogsägarna ekonomisk förening. Studiens syfte är att beskriva och förklara företagets investeringsprocesser och i vilken utsträckning dessa processer är standardiserade. I studien analyseras dessa investeringsprocesser utifrån befintlig teori. Studien visar att investeringsprocesser initieras i den operativa verksamheten för att sedan drivas fram i den operativa verksamheten och i ledningen på enhetsnivå. Beslut fattas på alla nivåer i företaget efter investeringars storlek.

This thesis describes how a cost reduction project was done on the Packsize ondemand packing machine EM7. The cost reduction was achieved by making minorredesigns of the EM7.The project began by studying the EM7´s structure and function by working on itsassembly line. A short literature study on the subject Design for Manufacturing wasalso done.By working on the assembly line and by speaking with staff from production anddevelopment departments, a number of ideas for reducing manufacturing costs arose.Estimations of the potential cost reduction size for each proposal were done incollaboration with vendors and the purchasing department. Based on the size of the cost reduction, technical risk, impact on the assembly lineand the development time the various proposals were ranked. The two highestranked proposals were selected for further development towards finished solutions.One of the ideas that were selected to develop in to a finished solution meant thatsome of the pneumatic valves were replaced with others.

This study deals with the technical and economic feasibility of replacing the nuclear power plant reactor Ringhals 3 with a biofuel power plant. A technical investigation has been executed to determine which of the systems and components that could be reused and which ones would need to be replaced. The investment costs of the reconstruction have also been estimated. The cost of the electricity production has been calculated as well as the emissions of the new biofuel power plant. Based on the established rate of return, the lowest average spot price of electricity that makes the investment profitable has been calculated.

När en kommersiell hamn byggs ut fordras omfattande muddringsarbete för att säkerställa ett brukligt djup för sjöfart. Då stora delar av muddermassorna ofta är förorenade av tungmetaller och miljögifter krävs särskilt omhändertagande av dessa. Traditionella omhändertagningsalternativ består av att deponera massorna på särskild avsedd plats på land eller tippa till havs, något som inte tillåts för förorenade sediment. En relativt ny metod är stabilisering/solidifiering (S/S) som innebär att muddermassorna behandlas med ett bindemedel för att sedan kunna användas som fyllnadsmaterial i exempelvis kajkonstruktioner. Dessa alternativ behöver noga vägas mot varandra med hänsyn till ekonomiska och miljömässiga aspekter.

For a long time I have felt that there is a lack of time planning productson the market that attracts me to use them. Therefore I wantedto explore the possibilities of developing something that I reallywanted to use.At first I tried to come up with a more general tool for planningand structuring time, different from the products that are alreadyavailable. But soon I found it more interesting to see myself as theprimary user. This way I felt that I could experiment more and Ididn?t have to take things like production, cost and possible targetgroups into consideration.As I set out with an aim to try and understand my own problemswith planning and structuring time the project became a very personalone.