I det västerländska samhället idag lever vi allt längre, samtidigt blir de äldre allt fler. Det finns idag en uppsjö av olika hjälpmedel till den äldre generationen, ett av de mest använda är rollatorn. Med hjälp av en rollator kan en människa uppleva en större känsla av oberoende, frihet och ett ökad socialt liv. Rollatorn är idag ett väl använt och för vissa ett oumbärligt hjälpmedel. En rollator användare behöver ibland röra sig ute i mörker, vi lever i ett land där vi upplever perioder med mycket mörker, norra delen av Sverige har ett stort antal mörkertimmar på året och för att förbättra ett redan bra hjälpmedel kommer denna rapport ta fram en belysning till rollatorn.Vad är det som händer med oss när vi åldras, vad sker med kroppen fysiskt och psykiskt? Vilka kognitiva förändringar kan vi förväntas erhålla när vi åldras? Rapporten tar upp vad som händer med kroppen när vi blir äldre och vilka olika former av nedsättningar som erhålls psykiskt och fysiskt.För att besvara forskningsfrågan "Vad innebär användarnytta samt användarvänlighet för design mot äldre?" tar rapporten även upp begreppen design och användarvänlighet och tittar närmare på delar som användbarhet, användarupplevelse, användarnytta, design och olika designprinciper, samt så har intervjuer utförts.Studiens forskningsresultat beskrivs i en tabell där sammanställda designprinciper har ställts mot olika regressioner som man erhåller vid en stigande ålder och visar på vilka delar av en design som behöver förtydligas vid vilken form av regression.

Jag fascineras av produktion och hur vi bemästrar tekniker för att skapa vår omgivning. Vi implementerar vetenskap på material och kallar det ingenjörskonst. I mitt examensarbete utgår jag från materialet trä, som är levande och varmt, och genom traditionell böjträteknik formar jag det. Jag fördjupar mig i tekniken genom studiebesök, egna experiment samt teori.Men detta är också design, jag skapar åt användaren. Många av mina timmar går åt att undersöka, utforska och leta form och funktion.

The continuous process of urbanization results in demands on research and development for ecological and sustainable city development. Because of this, the current systems for wastewater treatment may have to be improved. In order to evaluate new technologies for municipal wastewater treatment, a development project has been initiated for the new district Hammarby Sjöstad in Stockholm. The project is lead by the company Stockholm Water. High environmental standards have been put up for the district, as it must be twice as good as an ordinary new district.

The project has been oriented for development of fixtures to ateljé Lyktan to provide a more efficiency line. In the year 2012 the company invested in a new coating booth, which leads to opportunities to upgrading the fixtures and also new design. The request is to minimize the area for storage of fixtures, and therefore should fixtures be designed to apply as many articles as possible The priority of products that fixtures have development to has been products that are most frequently coated and new products that don?t have any fixtures. The product families that the project has been having focus on is TIME and FOVEA with RONDO. In the developing of fixtures have ideas been discussed with the staff, and instructions were made about how you are suppose to hang up the different products.

Tester på människor, så kallade kliniska studier, är en viktig del i utvecklingen av nyaläkemedel och samtidigt en stor kostnad för läkemedelsföretag. Framförallt när patienternafinns på många olika platser blir processen både dyr och tidskrävande. Real time InteractionPatient Evaluation (RIPE) är ett koncept och en prototyp till ett Computer SupportedCooperative Work (CSCW) system, utvecklat av Elof Dimenäs och Mats Sundgren(AstraZeneca) i samarbete med IT-universitetet. Systemet ska stödja interaktion med patienteri effektstudier och att övervaka medicineringen och dess effekter. Tanken med RIPE är attman ska kunna göra effektstudier med symtomskattning med hjälp av mobiltelefoner ellerInternet.

The project in question is a joint effort between students at Karlstad University and Marcus Norström at the company Hovercraft solutions. The project is divided into two parts, one focusing on the purely technical aspects of engineering the product and one focusing on the design aspects of the product development. The project described in this report is the design of the product. The assignment from Hovercraft solutions is regarding design engineering of a cabin for the hovercraft 380TD from the manufacturer Griffon hovercraft. The product lacks a cabin and none is offered from Griffon at the time being. 380TD is a relatively small hovercraft with a length of 6.8 metres and a width of 3.8 metres.The surface available for the cabin is not much different from the body of a car.Because of this, research has been focused primarily on car bodies.The product development process used in the project is following a systematic approach.From a chosen concept, the project was finalized with a CAD-modell as well as a detailed prototype.The weight target of 80 kg was reached and the ergonomic aspects were considered developing the sight field, roof- and entrance height.    .

Denna studie har som syfte att ta fram ett designförslag på ett ögonrörelsestyrt infotainment-system samt utvärdera detta. Fokusen ligger på den funktionella design och dess för- och nackdelar. Studien tar upp tre olika designförslag varav ett valdes att göra en prototyp av. Prototypen skapades med hjälp av HTML5, Javascript och Python. Detta kopplades sedan samman med ett ögonrörelsesystem tillhörande Smart Eye AB.

The shooting sport is one of the most widespread sports in the world and it isbeing practice in most countries. Based on their own experiences, in competition -and hobby shooting, the client M4Solutions found a demand and need for ashooting target that is manufactured in Sweden.The purpose of the project has been to develop, with the help of Marcus Walldén,two shooting targets from idea to finished product. These two shooting targets,Plate Rack Target and Dueling Tree, would each be equipped with a mechanicalresetting system but will in the future have the ability to be provided with anelectronic resetting system.The project from the client was divided into two theses. One of these two, writtenby Marcus Walldén, focused on the tripod parts and the overall design work forboth Plate Rack Target and Dueling Tree. The thesis that is presented in thisreport have focused on resetting systems, the design of protective plates and otherperipherals for both shooting targets.This work has primarily been in CAD environment where design, constructionand development has been given free rein.

The company Bergteamet, Boliden, Sweden, is installing ventilation shafts of the Garpenberg mine. For such work a platform is needed which you can stand on and work from. The Shaft Reinforcement Team at Bergteamet performs the installation work and is the sponsor of the platform. The project described in this report is performed at the department MEC, Mining Equipment Construction, which has been given the task to design and construct the platform, customized for the current shaft. After this the platform is manufactured and inspected at the workshop at Bergteamet.The design work was carried out as follows:- After an initial meeting a requirement specification was worked out, describing the problem and previous experiences of platforms and requirements for the design and equipment.- A concept sketch was developed with consideration of surrounding factors.- A constructed 3D model was presented along with the choice of materials.

Introduction:Corporate limits becoming more diffuse due to the globalization taking place and requirements for analytical strategies are becoming more fundamental parts of organizations. Business Intelligence systems are hot and not without reason, today's world is spinning faster and with a flow of information that is constantly increasing Business Intelligence promises to introduce a support that will render a better decision-making, something that everyone wants.Problem Discussion:The local government business has today demands from the Swedish School-inspection to analyze and create adequate target images to the school and students meet curriculum goals and guidelines. Therefore, local government activities has increasingly begun to implement Business Intelligence tools, with the purpose to facilitate strategic and operational decisions were the result plays an increasing role in today's society.Purpose:This study evaluates how the analysis tool Qlikview fulfills the function of monitoring and controlling the improved student achievement in public schools.Method:The evaluation has been conducted qualitative interviews with staffs that have leadership positions in each municipality and management and possess a deep knowledge of the analysis tool and its processes.Conclusion:The evaluation has shown positive effects on the monitoring and control of student performance through better control of school operations..

Inledning: Under min praktik 2011 kom jag i kontakt med ett samordningsförbund FINSAM, som arbetar med rehabiliteringsfrågor. Det var också här som jag kom i kontakt med de olika samverkansprojekt som bedrivs inom regionen både inom Samordningsförbundet FINSAM samt ESF projekten. Syfte med studien var att se vad det är som har hänt när ett samverkansprojekt avslutas. Metoden är en litteraturstudie som jag sen har kopplat samman med det intervjuerna som jag har gjort. Intervjuerna spelades in på en diktafon på respektive arbetsplats samt via samtal i ett bokat grupprum på biblioteket.

This paper is about transferring a feeling from a physical place to the Internet. The paper explores methods on how this transfer is done. Websites have a tendency to not portray the company behind it in a correct way. For companies with a distinct esthetic and work hard on their image and brand it is important that this hard work is portrayed correctly in every aspect. The problems this paper explores are: the importance of personas in a design process, methods of transferring a feeling from a physical place with design and how this can be tested, and using open-source content management systems in creating usable websites.

The following is an explorative work on various forms of collaboration. The core of our exploration revolves around the idea of co-operation as a tool for examination, a collective working method, the input/output within creative practices as well as a phenomena in its own right? It is however not ?simply? about collaboration, but rather places as much focus on a highly personal search for new working methods, new approaches towards research and on the development of our relationship to graphic design. From beginning to end, the entire project has become a work whereby the term ?we? has been more important than ?me? ? a well-functioning project with a common purpose: a collaboration, between us..

Vår kandidatuppsats handlar om användning och utveckling av Kustpilens biljettautomat. Vi har, genom etnografiska metoder, studerat hur människor använder sig av biljettautomaten vid köp av en tågbiljett. För att generera designidéer och utveckla vårt designförslag har vi utgått från dessa studier. Vi har sett hur viktigt det är för användarna att få feedback på utförda handlingar. Biljettautomatens design är viktig för att uppmana kunderna till rätt användning.

Abstract During object-oriented system development, programming should be preceded by analysis and design to assure that the system fulfils the demands of the customer and simplify during the development phase and documentation. When modeling the analysis and design phases, several different notations may be used. One of these is the UML (Unified Modeling Language) which this thesis will cover. The aim is to compare the use of the UML i practice versus what is said in the literature. The investigation is built upon interviews at different companies to receive their reflections about the UML.