BillerudKorsnäs is a leading global provider of primary fiber-based packaging materials and on Gruvöns Bruk in Grums, they have chosen to invest millions in the boiler at the facility to increase the total capacity of the factory. This results in the Pulp Flash Dryer at Gruvön being burden more, which makes it important that it is of great reliability and can be run with a high capacity. The reliability of the Pulp Flash Dryer at Gruvön is not as good as one could hope, which leads to reduced availability and production, as well as to increased maintenance costs. There are a number of different reasons for this, but all the casual links are not known.The purpose of this project was to perform a system analysis of the Pulp Flash Dryer to identify bottlenecks and the most critical parts from a capacity- and availability perspective. Appropriate methodology for the system analysis was used and would be used in a structured way to perform the analysis with data from the process and the maintenance system.

The aim of this literature review is to give an overview of the differences between pure- and crossbreeding systems. Crossbreeding is a mating system with individuals of different lines or breeds. It is one of several breeding strategies in dairy production used to increase the economic profit. The use of crossbreeding increases due to changes in the dairy market and an increase of inbreeding among purebred Holstein. The main benefit of crossbreeding is heterosis, which is the improvement in genetic level in a hybrid offspring above the average of the parent breeds.

Hallstaviks papermill is an industry plant within Holmen Paper. Hallstavik is a mechanical mill and produce newspaper and journal paper. During year 2000, Hallstavik used approximate 1.200 m3f spruce, either as logs or chips from sawmills. Due to that the production is running continuously the mill also needs raw material at the same rate. At some periods the supply of raw material cannot keep up pace.

This is a study, the purpose of which is to investigate how the construction company Sefab Bygg AB is able to increase its profitability and render a more efficient production process through logistic solutions. The study is made during one of Sefab´s present projects. The project includes sanitary renovation of 650 apartments in the co-operative Opalen in Norrköping.To find out whether changes of logistic routines are profitable or not, it?s necessary to evaluate the total cost of the changes. A total cost analysis is a mapping of all the costs for a particular material, on one hand for the present situation and on the other after the change.

Boliden Mineral Ab's mine in Garpenberg, Dalarna is going through a massiveexpansion. The annual ore production is being increased from 1,4 million tons to 2,5million tons in less than two years period of time. Along this expansion thedepartment of mining techniques is administrating a project of optimizing the shortterm planning for the mining production. Garpenberg have since mid 90s storedinformation from all mining processes in a database.The information consists of time data from all the different activities required in themining process, for example charging, blasting, loading etc. The database also containstime data of delays that are affecting the production.

Lean production härstammar från företaget Toyota och Taiichi Ohno?s begrepp ToyotaProduction System. Metoden är idag ett dominerande styrmedel bland organisationer. Därmedhar konceptet implementerats i allt fler västerländska resultatstyrda organisationer, varsparametrar för kontroll skiljer sig mot de lean production utgår från. Dess innebörd sträckersig över stora delar av en organisation, vilket bidrar till begreppets komplexitet.

Powdery mildew is a serious problem in both field and greenhouse cucumber production and can cause serious infection and radically reduced yields. Today, powdery mildew is the main disease in greenhouse produced cucumber. Disease control should preferably be both efficient and environmentally friendly, which is not easy to achieve at all times. Alternatives to chemical control of powdery mildews are biological control, physical control, non-fungicide control and cultivation of resistant or tolerant varieties. Biological control can be described as the suppression of damaging activities inflicted of a harmful organism by one or more other organisms, which are called antagonists or natural enemies. In Sweden, there are currently no registered biological control products available to control cucumber powdery mildew. The aim of this study was to investigate the effect of two biological control products in order to evaluate their ability to prevent or reduce powdery mildew infection to an acceptable level in greenhouse produced cucumber. In the experiments, different application regimes were also studied.

Study objects: Three different productions companies which the authors have chosen to be anonymous. Purpose: The purpose with this study is to examine why production companies choose to use 3D-animations in television commercials, and what different kind of aspects affects their decisions. Theoretical: The theoretical chapter reviews the history of 3D-animation andtelevision commercials and other fields that will be relevant laterin the analysis and discussion. Method: A case study has been made on three different companies, two of the companies are active in post-production and the other one is active in the consulting area. Data was collected through semistructured interviews with two of the companies.

As a result of global competition, companies within the automotive industry are required to improve their production systems to achieve sustainable and competitive production. To attain operational excellence, companies have adopted concepts like lean and World Class Manufacturing (WCM).In order to deliver, companies need to increase the availability and reliability of production equipment. This demands focus on both operational and strategic maintenance, and efficient equipment acquisition and management. The main objective of this thesis is to identify processes and success factors that are necessary for improved maintenance performance. By conducting a case study and by performing a literature review, the following has been studied: 1) how companies within the automotive industry work with maintenance and maintenance strategies, 2) implementation of maintenance strategies, and 3) new acquisition and spare parts management for maintenance. The results show that basic maintenance concepts and related terms are well defined in the literature.

As a small and land scarce country, effective waste management is ofoutmost importance in Singapore. In this study the production of biogasthrough anaerobic digestion from the organic fraction of municipal solidwaste (OFMSW) was compared to incineration of the waste. At the momentalmost all of the OFMSW in Singapore is incinerated. Three differentscenarios were compared to the reference scenario (incineration): one with alarge scale biogas plant that can treat half of all OFMSW in Singapore, onewith a medium scale biogas plant about 15 times smaller than the large oneand one with a small scale biogas plant that can treat waste from e.g. ashopping center or a food center.By using life cycle assessment (LCA) the different scenarios were comparedin terms of global warming potential (GWP), acidification, eutrophication,energy use and land use.

Clearcutting systems have been the dominating silvicultural approach during the last decades in the Nordic countries. While economically rational, it is also leading to a trivialisation of the flora and fauna, and may result in negative reactions of people in urban settings. As a consequence of this, and a more diversified view on which goods and services forests should deliver, there is an increasing interest in broadening the range of silvicultural methods that are used. The term continuous cover forestry (CCF) represents a suite of methods that have gained increasing interest in the Nordic countries. In CCF a considerable amount of the trees are left after harvest to favour values that require a continuity of tree-covered areas. There are thus hopes that this method will meet the needs for maintaining biodiversity and satisfy social and cultural values.

The component workshop at Atlas Copco inTierp intends to reduce the costs inorder to increase their competitiveness.This thesis examines how the productionmanagement around cylinder washersshould be managed in a way that meetsthe customer needs. The customer to thecylinder washer is Atlas Copcos assemblydepartment in Tierp.The purpose of this thesis is to providean alternative way of managing theproduction. A chapter of theory is addedto give the reader an insight ofdifferent types of production managementsystems as well as the underlyingknowledge needed to get a better readingexperience. An introduction of kanbancan in theory help Atlas Copco in thedirection they strive. It should beclear how the purpose of this thesisaffects the cost for the componentworkshop and also how it relates to thecurrent production.

Bravida is one of Scandinavia's leading suppliers of technical installations and services. According to Bravida an installer loses around 35 per cent of their daily work. It?s the time aspect that?s going to be examined in this thesis. The purpose of this thesis is that the student in question is to investigate the activities of the installers that works with this project, identifying where and how time losses occur and come up with suggestions for improvement.Methods used in this work is literature studies, observational studies and interviews.

Ethanol produced from lignocellulosic biomass has the potential to become a promisingalternative to gasoline. In this work the simultaneous saccharification and fermentation (SSF)technology was applied for ethanol production from hardwood with focus on cell growth,ethanol production and contamination.The SSF was performed at PH 5.5 and 35°C for different suspended solid concentrations(8%, 10% and 12%) of pretreated birch slurry which contained 16 % total suspended solids.Two different hexose fermenting yeast strain (Ethanol Red) and pentose fermenting yeaststrain were used.Quantifying the concentration of chemical components and metabolites in the fermentationmedium demonstrated that glucose and xylose are the major fermentable sugars in the slurry.The higher load of slurry (12%) represents a higher content of carbohydrates and potentiallyhigher end concentration of ethanol. Moreover, more lactic acid is produced with the lowerload of slurry (8 % or 10 %), presumably due to a result of a less inhibitory environment forbacterial growth. In this context, acetic acid sticks out as the most important inhibitor withconcentrations of 15.2 and 12.5 and 9.7 g/l respectively in the 12 %, 10 % and 8 % (ofsuspended solids) trials. Using pentose fermenting yeast may lead to higher ethanolproduction, lower xylose uptake and lower lactic acid formation.

It's not a secret that most companies strive to get such a high economic return as possible. To successfully engage in a profitable enterprise, there are many elements that come into play. An important element is the motivation of the employees and their work performance. Work motivation is a key factor for the employees to improve their performance and therefore determinant for the successes of the company.This work is a case study in the production at Fresenius Kabi, Uppsala. The work is based on an employee survey that they fill out once a year and the aim is to develop a deeper understanding for these questions and how the employees see on leadership, communication and goal-setting as motivators and how these factors works in the company today.To get this deeper understanding I have used a qualitative approach.