The waste of material is a big expense for manufacture companies caused by lack of quality. The cost by lack of quality often totaled to a big percentage share of the turnover when all cost related to lack of quality is included. New manufacturing systems like Lean production or Just In Time demands better internal quality for the manufacturer. To make those manufacturing system with small and none buffer stock successful the quality improvement continuously have to be developed.Measuring of waste of material in Bubs Candy?s factory where not simple due to the products does not have a permanent weight during the manufacturing process.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

The aim of this essay is, firstly, to ? through a text analysis ? compare the curriculum of Waldorf education in Sweden (in the essay referred to as ?WL?) to the Swedish national curriculum ?Lpo 94?, to uncover possible differences and similarities between these documents, and, secondly, to present the roots and educational philosophies that these two curricula, respectively, are based upon. The purpose hereby is to be able to trace, describe and explain the differences between the pedagogical practices of Waldorf education and that of conventional Swedish schools.In the essay, a historical investigation of the main traditions of ideas behind the Swedish national curriculum is briefly carried out, where I swiftly present the educational philosophies of John Dewey (1859-1952) and Lev S. Vygotsky (1896-1934). Next, an investigation of the worldview and philosophy of Rudolf Steiner (1861-1925) is effectuated, where I attempt to bring to light Steiner?s anthroposophical and holistic worldview ? a worldview that throughout the 20th century has developed into an international and wide-ranging anthroposophical movement ? as well as his concepts of knowledge, science and educational philosophy.

Syftet med denna litteraturstudie är att jämföra larvterapi och konventionella metoder vid behandling av svårläkta sår utifrån följande perspektiv: upprensning av sår, duration av sårläkning och patienternas upplevelse. Polit & Becks (2006) modell användes vid arbete med denna litteraturstudie. Sökning av relevant litteratur gjordes i tre databas: PubMed, CINAHL och The Cochrane Library. Relevanta artiklar granskades med hjälp av granskningsprotokollerna modifierade av författarna efter Willman (2006). Nio olika studier har undersökts i denna litteraturstudie.

Major changes within the agricultural politics today have forced the dairy production to scaleup, in order to compete on a global market. This has resulted in a reduction in the number ofsmaller dairy farms in Sweden, from about 40000 to just over 4000 over the last 30 years. Thepurpose of this study Svenska mjölkbönder, snart ett minne blott? ? Markbygdensmjölkbönder i tankar om mjölkproduktionens nuvarande situation och framtidsutsikter, is topresent the opinions of dairy farmers in Sweden, regarding the Swedish dairy industry and therelation to their own dairy production. A secondary purpose is to problematize how theconsequences of pastures and cultural landscapes influences human society as dairy farms andgrazing animals are becoming fewer.

Cross-suckling, i.e. when an offspring nurses a female other than their own mother, occurs in pig production systems where sows are group housed during lactation. As production systems where several sows and their litters are housed together during lactation are getting more common, the need of knowledge regarding cross-suckling increases. The overall aims with this thesis was to investigate how sow behaviour and productivity are associated with the occurrence of cross-suckling, and to investigate consistency in sow nursing behaviour related to cross-suckling. The study included information about the first 4 parities of 40 LxY sows kept in outdoor and indoor production environments. Sows were single housed the first 2 weeks after farrowing and group housed (4 or 5 sows per group) from 2 weeks after farrowing until weaning, 7 weeks after farrowing.

The question formulation in the essay brought up whether Clas Ohlson works today with their graphical productionflow and if that way of working leads to a desirable result in press. After a dialogue with Clas Ohlson it emerged thatthey had certain problems with the material that came out of the printing presses. Certain colours were not reproducedaccording to the stated values that had been developed. In March -08 an analysis of the graphical production flowspresent situation were done at Clas Ohlsons in order to find out how they worked with their production of print materials.In the analysis, their way to work with color spaces, displays, ICC-profiles, PDF-exports, pictures and printerswere examined. Occasional interviews were also implemented with responsible personnel about how they worked withdifferent aspects.Deficiencies were found on almost all examined parts in their graphical production flow.

This thesis investigates if a system for small scale electricity production located in anurban environment can be profitable. The work has been divided up into two parts,one extensive literature study and one case study. The purpose of the literature studywas to investigate the area, resulting in a choice of which technology to be studied indepth in a case study.In the case study a system containing small scale wind turbines and photovoltaicsmounted on Gränby Centrums roof was examined. From data containing wind power,wind direction and total irradiation, possible production from a system weresimulated. Three products of each technology were examined in the simulations.From the simulated production an economic analysis was carried out, this toinvestigate if a system is profitable.

Methane (CH4) is a greenhouse gas (GHG) that contributes to the global warming. One of the largest sources of methane is livestock, preferably ruminants which alone counted for 30% of the total agricultural anthropogenic methane emissions in the year of 2000. The reason to why ruminants are such large contributors of methane are that the gas is produced in the rumen by enteric formation and leaves the animals by belching, exhaling or by the excreta.Diets high in concentrates can result in a lower emission of methane. Also diets with a high content of starch, such as alfalfa-grass, have a methane-decreasing. It is profitable to reduce enteric methane formation since that form of methane is unavoidably lost.

AbstractOutsourcing is a business strategy that has developed over the last 40 years. Outsourcing means to let another company do some activity within the company, for example production.The thesis for this paper is: How is outsourcing used in a manufacturing company today and how is the resource efficiency affected by it? The research is divided into two parts, a theoretical part and an empirical part. The theoretical part consists of a study of literature. The works in this study is books, text books, bachelor thesis paper and scientific articles.

Increasing the use of biofuels is an important part of achieving the EU?s target of 10 percent renewable energy in the transport sector. However, the competition between biofuels and food production is an ongoing concern. Also, several studies have indicated a significantly higher climate impact than was earlier estimated, due to emissions from land use. In Sweden, both the use and production of biofuels from crops have increased substantially during the last decade. The purpose of this project is first to present an overview of the Swedish land use in all sectors.

The aim of this project has been to raise the production efficiency of Daliff Precision Engineering through reduced transportation time and a more standardized manufacturing process. The problem has upraised because of a big and diversified product flora without any standard products and with just small batches ordered. The report also tries to show the work procedure with general analytical methods and be an example of how a similar problem can be resolved. The transportation time is being proposed to be reduced through a change in the layout of the factory. By moving a few manual machines, dispatch and burring to more efficient locations, the total transportation time will be reduced by 55 %.

Higher demands of competitiveness and efficiency have led to increasing sizes of farms, with more land, more capital and more comprehensive logistics. The aim is to gain benefits of scale economies that reduce the production cost per unit. However, a greater extent of the business exposes the farm of increased risk where small deviations rapidly can erase the benefits. A modern dairy farm thus put high demands on the farmer?s ability to coordinate, plan and manage the forage production through the whole process until storage to obtain silage of the desired quality and quantity at the right price. The objective of this study was to design a simple model, i.e.

The aim of this thesis is to develop a new business model for district heating and cooling firms which can contribute to a stabilization of the Swedish national energy system. The business model is developed for a district heating and cooling firm and is exemplified with Fortum Heat. The theoretical investigation around the topic creates a rigid base for following qualitative empirical studies. Osterwalder?s canvas for business model generation is used together with a Casual Loop Diagram to identify a number of business opportunities which stabilizes the national energy system.

The aim of this report was to investigate if Sweden can have 100 % renewable electricity production in the year 2050. The conclusion is that it is possible but under certain conditions. For instance wave power must be in commercial use. When wind power and solar power represent a large percentage of the electric production there will be a lack of electric power during the winter but during the summer there will be a surplus of electric power. Both the surplus and the lack of electric power need to be taken into account.