As a result of increased energy prices more and more energy-efficient homes are coveted. An energy-efficient alternative is passive houses, which is characterized by an extremely well insulated building envelope that recovers the heat without the use of radiators or under floor heating. But a passive house requires a higher investment cost than a conventional building project, since it will require more construction materials, training of construction workers, greater land area, and long construction period. But the lower operating cost expects to pay back the higher cost of investment. We therefore question how profitable a passive house is in relation to houses built according to modern conventional building techniques.The aim of our study is to investigate the viability of passive houses compared to convent­ional houses.

Volvo Construction Equipment is one of the worlds largest manufacturer of heavymachinery. In Braås, Sweden, they develop and manufacture articulated haulers inseveral sizes. The biggest, the A40, is capable of loading almost 40 metric tonnes.These haulers have a bogie to distribute the forces of the load evenly onto the two axlesand there wheels. The bogie is constructed using a rigid balance beam on each side ofthe frame connecting the axles or an independent solution using hydropneumatics.An analysis has been made in order to establish the forces created during corneringand through the theory, an estimation of the extensive tyre wear and extra fuelconsumption has been made. All due to the effects of the tyres not being inline with thecornering radius.

This thesis treats Building Information Modeling, BIM, in the production stage. Brieflydescribed BIM is virtual model of a building object where all information about theobject is gathered. All the involved operators in the construction project have access tothe model and can gather or share information about the project. There are several waysto apply BIM in the production stage. This thesis primarily deals with visualization of theobject, preparation and planning, the ability to take amounts from the model andcoordination and clash control.The basic issue was highlighted by Byggdialog AB.

Considering that the current technology is constantly improving, it becomes increasingly important to have an efficient logistics in a company to maintain profitability while achieving a competitive business. Efficient logistics may be accomplished by improving the internal materials handling. In this thesis the internal material handling of steel frames has been studied at a factory in Vaggeryd. The goal of this study is to investigate the problems that exist with the current production flow of products and provide suggestions on how it can be developed to reduce unnecessary handling and movement.The study has a deductive approach where the authors has been using literature studies parallel with empirical analyzes conducted at a company to achieve the purpose of the study. Documentation from the company and interviews with staff and observations form the basis for the data collection carried out.

Biogas is a renewable energy source that is produced by anaerobic digestion of organic mate-rial. In Sweden, biogas predominately comes from sewage water sludge and landfills or from organic waste of households and industries. Small scale digestion plants at farms are espe-cially expected to contribute to increased biogas production in the future. Biogas can be ob-tained directly in it?s raw form and used as fuel in a combustion chamber.

The thesis work was conducted with the company Free2Move AB. The company is located in Halmstad and is an acting provider of wireless communications for industrial customers, mainly focused on Bluetooth? technology.In today's society most people have their music on their computer, MP3 player or mobile phone. What if you could avoid the cable between your sound system and sound source and transfer music wirelessly instead? Together with the company's engineers, I have developed a new comprehensive product for wireless music transmission.

The development of productivity in the construction industry has long been at a steady state compared to the manufacturing industry. Studies have shown that, amongst other things, waste on construction sites can reach up to one third of the total production cost. This has been observed from different aspects, and change is forthcoming.This thesis aims to provide a foundation for an increased productivity at production sites of building bridges. It is primarily based on a field study at Skanska, at a bridge construction site near Grängesberg. Via continuous interviews with the whole production crew, construction workers and management, information on interference and possibilities of improvement at the work site has been documented.

One of Sweden?s sixteen national environmental objectives strives to decrease the impact on the climate. By 2020, green house gas emissions should be 40 % less compared to the levels of 1990 and a minimum of 50 % of the energy consumption should come from renewable energy sources. Because of this there is a great need of increasing the production of renewable energy. This is where biogas comes in as a competitive alternative.

Since the turn of the millennium a sharp increase in the interest for bio energy has been observed. Important reasons for this growing interest can be due to the fact that fossil fuels are a finite resource. A net discharge of greenhouse gases occur when fossil fuels are burned. The discharge of greenhouse gases are considered to be the main reason to the greenhouse effect. Means of control to increase the use of bio energy has been introduced and, as intended, the use of bio energy has increased. As a result of the legal provisions the ability to pay for bio energy has increased, which the forest industry view as a problem.

This study analyses the economic consequences due to ethanol production in Eastern Sweden. The analyses consider the cooperative and the farmers as one vertically integrated company. The area that found the market in this study is illustrated in figure 1. The analyses assume that all members act jointly with the objective of maximizing joint profits at the farm level as well as at the cooperative firm. A mathematical model is created to calculate the optimal use of arable land.

Skanska is using work schedules that are specifically designed for employees in the production. These work schedules are called best practice. These are guides containing technical descriptions, design references, capabilities, etc. for work activities. This support function facilitates the work preparation and planning of future work.

A report has been made at a company in Borås at a company called ACG Nyström. Thecompany is today international and is marketing advanced equipment, systems and furthereducation to the manufacturing industry. A part of ACG Nyström?s production is a machinethey call Unimat. ACG Nyström doesn?t just stand for the actual production of the machine,but also for assembling and installation of the machine at the final customer.

The goals of this Bachelors? Thesis were to establish the production loss through the VTIS1 Pasteur at Arla Foods Linköping dairy and then suggest simple but effective solutions to minimize the losses for each production run. If the timeframe allowed it, some of the solutions would be implemented and tested in full production to determine their impact on economic and environmental savings.The very first step of this project was to establish the statistics over what losses there is in the production pipeline through VTIS1, from milk and powders in mixer tanks to finished and packed products in cold storage. Then, when knowing how much product was actually lost and where, those bottlenecks could be pinpointed and examined more closely. At this stage the focus was switched, from the otherwise complicated and broad manufacturing process, to the VTIS1-aggregate, since early data indicated there were quite substantial losses there.In conjunction with this project Arla Foods purchased an absorption photometer-measuring device (OPTEK AS16) that could be inserted straight into the product stream out of VTIS1, allowing real time measurements of its optical density.

The soybean can be used in multiple ways, and its high oil content makes it suitable for extraction. Soy bean meal, a by-product of the oil extraction, is a good source of protein with a high feeding value, and is therefore used in a number of different animal feeds. Further, soy bean meal has a low production price, which is one of the reasons for the extensive export of the product. There is a great demand for vegetable-based proteins, especially in the organic production where synthetic amino acids are banned. However, the current production of soy beans is not environmentally sound and that combined with the long transport distances amplifies the need of finding a locally produced protein source.

Livestock of pastoralists provide meat, milk, blood, dung and are useful for transportation purposes. In semi-arid and arid areas with very low precipitation the herder must often walk far distances to feed the livestock. This affects the animals? production, especially of milk. Previous studies have investigated how to improve milk production in terms of milking strategies in cattle.