The focus of this thesis is primarily in electronic construction and describes the design process for a microController circuit board from concept development to prototyping. The client develops test fixtures for automated testing of products within the electronics industry and needs a new Controller circuit for the test fixtures that can handle controls and basic testing. An investigation into the needs of such a system is conducted and a prototype printed circuit board assembly is manufactured.The prototype is developed with focus on protection against electrostatic discharges and overvoltage. Among the functions that are included are voltage measurements, communication interfaces and control of input and output currents. Firmware for the prototype is developed and configured to communicate with a PC through USB interface for control and collecting of measurements..

This report describes a thesis done at the Jönköping University of Technology. The aim of this thesis was to create conditions to optimize an existing automatic electrostatic coating system by changing the technology for dispensing lacquer. To select the technology, a study of different dispensing techniques carried out which concluded that the piezoelectric membrane and electrostatic atomization are the most interesting techniques.In order to perform tests with dispensing techniques a demonstrator has been optimized. The Controller and PC software of the demonstrator has been programmed to be able to send out PWM signals that control the dispensers. An adapter card was designed to control the piezoelectric membrane and a steering link to the electrostatic atomization has been developed for PWM signals up to 500V.The work has laid ground for a demonstrator where further testing of the dispensing technologies can be performed..

På grund av marknadens hårdare krav på en bra likviditetsredovisning har likviditetsplaneringen blivit allt viktigare för företag. I arbetet med likviditetsplaneringen är det viktigt att veta vid vilken tidpunkt som in- och utbetalningar sker. Det är dock ett svårt arbete som påverkas av att kunder har olika betalningsvanor och av osäkra affärer i utländsk valuta.Syftet med denna uppsats är att beskriva hur Schenker genomför sin likviditetsplanering idag samt att undersöka ifall det finns förbättrings-möjligheter. De teorier som berörts handlar om faktorer som påverkar planeringen av likviditeten och hur de bör behandlas. Insamlingen av företagsinformation har skett genom en fallstudie av Schenker där tre intervjuer med en Controller genomfördes.Studien har visat att Schenker överlag har en väl fungerande likviditetsplanering.

Genom litteraturstudier samt praktiskt arbete med förbättringar av programvaran File Secure har ett antal lämpliga designmönster för konfigurationshantering i Java identifierats och applicerats. Den typ av konfigurationshantering som här avses innefattar inläsning från en databas till en objektrepresentation, samt ett grafiskt gränssnitt som låter användaren modifiera datat. Det antas att mängden data är förhållandevis liten, vilket har gett upphov till vissa förenklingar. Resultatet av arbetet presenteras i form av ett mönsterspråk för konfigurationshantering, innefattande designmönstren Domain Model, Active Record och det befintliga mönsterspråket Model - View - Controller. Detta kan appliceras i många olika sorters system..

This master thesis covers the development of an automatic tuning process for the existing speed Controller for drive systems. The drive systems are resonant two-mass systems where a motor is used to drive a load connected by a shaft. The developed method relies heavily on system identification and the construction of a complete mechanical model of the process. With this approach, the common problem with poor load speed control that derives from measuring only the motor speed can be addressed and solved for a majority of such processes.The automatic tuning method has along with general test functions been implemented in a complete tool for automatic tuning, testing and performance evaluation and reporting for drive systems..

Vi behandlar i denna uppsats metoder för att minska transaktionsexponering vid utrikeshandel. Uppsatsen är skriven på uppdrag av ett fallföretag och problematiken kring transaktionsexponeringen sätts i relation till deras situation. Syftet är således att utifrån fallföretagets situation beskriva teorier kring området och genomföra ett test för att komma med förslag på en säkringsstrategi för företaget. Vi har tagit del av en riskanalysrapport från företaget samt haft öppna intervjuer med ekonomichef och Controller. Vidare har vi laddat ner data från Sveriges Riksbank och Datastream.

Abstract The purpose of this essay is to find difficulties and risks in the re-engineering process when restructuring to Model-View-Controller (MVC). A thoroughly theory study has been conducted to be able to understand the important steps in the re-engineering process. The methods and concepts of this essay are re-engineering, UML, system development life cycle, design patterns and MVC. The science approach used is design science where the artifact being developed are a set of models.In the analysis phase of the process the system is analyzed. The result of the analysis is notes of difficulties found and models showing the structure of the system.

ABB Surge Arrestors in Ludvika have for a long time had a problem to keep the moisture at a steady state in the production of their ZnO-powder, that is used to produce varistors.Some black-box models of the spray drying process have been designed and evaluated to find a solution for the problem. After evaluating the collected data it has been found that variations in the supply voltage causes control difficulties for the operator. A cascade control system was designed, consisting of three PI control loops designed with lambda tuning. The disturbance in the supply voltagewas used as a feed forward in the control system.At the end of the project the control system was installed, and tests were made to verify the functionality of the regulator. It was shown that most of the variations in the moisture of the powder could be eliminated using small resources, through purchase of a process Controller and four power meters.

This report discusses developing a software log tool for analysis of industrial processes. The target was to develop software that can help electro Engineers for monitor and fault finding in industrial processes. The tool is called PLS (Process log server), and is developed in Visual Studio.NET Framework 2005. PLS works as a client with Beijer Electronics OPC Server. The program is able to read data from PLC (Programmable Logic Controller), trough the OPC Server.

In this Bachelor Thesis (20 p.), we present the history and development of "Intelligent Houses", and most important- explore some of the future possibilities in this area. The project has been carried out through an interdisciplinary cooperation between three different educations at the Blekinge Institute of Technology. By conducting a dialogue with various actors with different professions, we have been trying to identify needs within the concept of "Intelligent Houses", were the end user is not only the tenant or homeowner. Through Participatory Design methods, such as a Future Workshop, we have brought the users together to discuss their own and each others needs and hindrances in their respective work practice, and how intelligent house technology could improve their work conditions. We have also been testing a highly sophisticated CO/CO2/Moisture/Temperature/Enthalpy multi-sensor & Controller, originally developed for regulating indoor climate systems.

Målet med uppsatsen är att åskådliggöra vilka fördelar, nackdelar och effekter användarbaserad systemutveckling har för den administrativa delen av en organisation. Intervjuer har gjorts med en chef och en Controller på ett större svenskt företag samt med en expert inom området för användarbaserad systemutveckling. Undersökningen visar att fördelar som ges vid användande av användarbaserad systemutveckling är t.ex. att organisationen och individen blir mer produktiv, får en mer flexibel miljö att arbeta med och blir mindre beroende av konsulter. Nackdelar har visat sig vara att organisationen kan försätta sig i en situation där de blir beroende av den person som har utvecklat ett specifikt system och kvaliteten på underhåll kan även försämras när användarna utvecklar själva.

AbstractThis report is about the creation of a test system for development of a control system for a off the shelf RC-helicopter, which can be bought for about two thousand SEK. The test system consists of both electronics for controlling the helicopter and mechanical constrainer. The constrainer is used for mounting the helicopter so that it won´t crash.A circuit board including processor and sensors was manufactured. This was used for doing test of the different control algorithms. In this way were we able to analyze the quality of the sensors chosen, and what other sensors that could contribute to the control of the system.Basic helicopter control have been studied and presented in the report.

This thesis studies the negative impact that control signal saturation may have on a controlled system. Different methods that are used to compensate for this problem are also studied and evaluated. Both sensitivity to disturbances and the effect the method has on the systems'ability to follow a reference signal will be examined. Stability will be discussed, but no conclusions whether the systems are stabilized or not can be drawn. Control signal saturation will lead to a slower behavior in general.

Problem: Ekonomer i IT-projekt är ett väldigt outforskat område. Frågan är om ekonomens kompetens utnyttjas och dras nytta av i projekten. Vi vill se vad ekonomen kan ha för roll i IT-projekt och om de kan tillföra något för att förbättra projekten. Syfte: Syftet med uppsatsen är att föreslå roller och arbetsuppgifter som kan passa en ekonom i IT-projekt. Metod: För att kunna nå vårt syfte har vi använt oss av kvalitativ metod.

The role of the quality manager has evolved from being a quality Controller to work with a more global business. Within many organizations in Sweden, however, the traditional role of the quality manager's remains and the tasks categorized as quality control still takes up most of the quality manager's time. The survey conducted as part of this master thesis shows that the quality manager in most businesses has multiple roles in addition to the role of quality manager, which can create a role conflict. One consequence of this is that each improvement is not given priority due to time constraints. Although the importance of a clear and committed leadership is the key for succeeding as the quality manager.