Previous research in the area of leadership and stress has shown that the leader plays an important role but in what way is still an issue to explore. A qualitative approach was used in this study to develop an increased understanding of the leader's experience of stress using four themes; leadership, stress, control and organizational factors. A total of 12 semi-structured and un-structured interviews were carried out with 6 leaders, three females and three males. The data was transcribed and thematic as well as narrative analysis was conducted.The results indicates that leadership stress is caused by a lack of control and that factors intrinsic to the role as a leader both facilitates and complicates the leaders situation when facing stress..

In this Thesis the possibilities of designing a larger building that is very energy efficient in the sense that it would not need a conventional heating system are discussed. Solar radiation transmitted through the windows, internal heat from occupants, lamps and electric appliances inside the building and heat recovered from the ventilation system then have to be sufficient for the heating of the building. This study is of general interest since the property company, Akademiska Hus, plans to use this study as a first step in determining if this technique could be used in the future and thus be worth further investments. A building without a conventional heating system of the size investigated in this project has not yet been built.The energy needed for the heating of the building was simulated using VIP+.The conclusions from the study are that it is possible to build large buildings without any conventional heating system. This could be achieved in many different ways, for example by lowering the inside temperature or by using better windows and heat recovery system with higher efficiency.

The report is the result of a master thesis at ENEA AB during the fall of 2009. Itaims to create a specification of flash memory management system which focuseson power efficiency and low RAM usage for embedded systems, and to design andimplement a prototype of such a system to facilitate further development toward thecreated specification. The system used by ENEA today is a Flash Translation Layer(FTL). It has a complex structure which prohibits modifications and customization,therefore a new flash memory management system needs to be developed.The suggested solution uses a translation layer called Metadata FTL (MFTL), wherefile system metadata and userdata are separated from each other in order to improveperformance. The partition holding userdata uses a block-level mapped translationlayer system called Fully Associative Sector Translation FTL.

The purpose of this paper is to make an analysis of the urban Roman water system. I have chosen to work with the system as a general field, not as a case study of a single town. In my opinion such a study would not give a proper and fair view of the subject. Therefore, this paper will discuss the different parts of the system, each one for itself and name examples wherever possible, to give a wide survey of the reality of the Roman water supply system. The aim is to give the reader a clear picture of different solutions used in the time of the early Roman Empire and a good understanding of the subject..

Active Vibration Control of a Laser PatternGenerator in Microlithography.

Tillverkande företag har under de senaste åren ställts inför en förändrad marknadssituation, vilket innebär att de fått förändra sitt arbetssätt från en produktionsorienterad syn till en kundorienterad syn. Den kundorienterade synen innebär att företag snabbt måste kunna ställa om sin produktion för att tillfredsställa kundens behov.MPS-system (Material- och ProduktionsStyrningssystem) är mycket effektiva hjälpmedel vid snabba beslut och omplaneringar, de ger dessutom möjlighet att ge kunder direkt besked om orderstatus. MPS-system tenderar att bli stora och komplexa, de har kontaktytor mot nästan alla delar i företagen.Många företag idag köper MPS-system. Stora företag byter gamla föråldrade system och allt fler små och medelstora företag inför MPS-system. Kommande milleniumskiftet är också en orsak till att flera företag byter sina MPS-system idag.Med detta väcktes intresset för att undersöka om företag som investerar i dyra MPS-system verkligen får ut det de förväntar sig av dem.

I have done a comparative gender study of Library of Congress Classification from 1900 and 2001. I have also used a hermeneutic method and ideological critics to find out what picture of women the both systems shows. In my comparative study of the both systems I have found low update of classes which relates to women in the new classification system. Men seem to be a norm in the system, because men are not defined in classes related to both men and women. But many classes related to women are named Women as and Women in The study also shows that women are more related to subjects about family and marriage than men are.

Abstract Title: The Future of ABC at Sandvik Tooling ? Incorporating ABC with information systems in order to drive business development from a cost point of view. Authors: Jenny Andersson and Camilla Salomonsson. Supervisor: Charlotta Johnsson ? Department of Automatic Control, Lund University.

Vårdsektorns IT-system fungerar inte optimalt ur användarsynpunkt då acceptansen bland de olika professionerna är låg.  När IT-systemen inte klarar av att stötta vårdaktörerna i deras dagliga arbete så kan det medföra en rad olika följder så som stress, tidsbrist och minskad patientsäkerhet. Därför ser vi att IT-systemen bör utvecklas ut användarsynpunkt för att klara av att fylla sin funktion som ett hjälpmedel i vården. Denna uppsats ämnar undersöka hur användarinvolvering vid systemutvecklingsprojekt i vården kan utvecklas. Genom en intervjustudie så kartlades den nuvarande situationen i vården. Med detta som utgångspunkt har vi sedan föreslagit tekniker och verktyg som kan hjälpa leverantörer och beställare att förbättra användarinvolveringen vid implementering av nya IT-system i vården.Nyckelord; IT-system i vård, användarinvolvering, Participatory Design, systemutveckling.

Wood for commercial use is harvested from forests using forest machines like harvesters which folds, branches and cuts trees and forwarders which transports logs to a landing area for further transport to a processing facility. Future forest machines have to be much gentler to the machine operators and forest soil than today's machines. Hence new machine solutions must be developed and tested. A practical way is to develop a physical scale model which can be used as a test-bed to incorporate different types of solutions for suspensions, cabin damping, tires and tracks, crane and overall architecture. The aim of this project was to develop such a 1:5 scale model of a forest machine, named as ?Skogbil.A scaling strategy was employed to arrive at important scale dimensions and specifications ofSkogbil which would be comparable to the full scale model.

Today's industries are constantly evolving and the demands according to quality for products and services produced and performed are becoming more and higher. ISO 9001 is a standard that serves as a tool for organizations who wants to effectively control and manage their quality workforce on business different processes. A background to the introduction of a quality managementsystem towards Skärås svets och mekaniska in Västerås are that more and more customers demand this from a company to enable it to obtain an order of production.Efforts to introduce a quality system such as ISO 9001-2008 all begin with to carry out a situationanalysis of the business. Skärås svets och mekaniska currently has no existing quality management system so therefore there is no current directives regarding who is responsible, for a future certification in the business.By structuring a situation analysis of the business. You get a good overview of the business and how it is conducted today.

The division of Engineering Materials at Linköping University, department of Management and Engineering, conducted a research project concerning Fatigue life of thermal barrier coatings during 2009. During this project equipment to provoke these fatigue failure by rapidly heating and cooling test subjects in cycles, was ordered.Design and manufacturing of the equipment was handled internally at LIU.The equipment was built using a furnace that is lowered and raised over the table where the test subject is placed. To keep the temperature of the furnace a lid slides in place to close the downward facing opening of the furnace when it is in the raised position. On this door there is nozzle that is used to cooling of the test subject by air.To make sure that the equipment can work independently you need an automation controller that can evaluate if movement can occur without danger of collisions. The Control system also needs to monitor that all elements are performed according to plan.This degree project is based on a modular system from OPTO 22 and includes the configuration of a PLC that will be supplied with logic and a user interface.The degree project resulted in a graphic interface in which a user can set desired values for different parameters and get information about current values for them.

Fruit flies (Tephritidae) are serious pests that cause enormous losses for farmers in many countries. The frequent use of insecticides in controlling fruit flies in fruits and vegetable has not resulted in sustainable management of the pest. Problems associated with this complete reliance on chemical control are many residues of insecticides in crops, health problems for farmers, contamination of water and soil, insecticide resistance development and decrease in natural enemy populations. The implementation of control measures that do not imply an added burden to the environment and/or the farmers is urgent. More knowledge about the ecology of fruit flies is the basis for finding new and better ways to control this pest.

IT exist and are needed in larger organisations today, this creates possibilities for new applications. It has become more frequent with IT within HRM which has developed new concepts like e-HRM and HRIS which links IT and HRM together. We have through qualitative content analysis of interviews investigated how IT-tools affect HR-workmanship. The purpose is to create a basis for describing how employees experience their work with HR within a PA-system. The basis of the PA-system will then answer if it contributes or limits the employees and their activities.

This thesis aims at exploring a national collaborative gateway-service, PictureAustralia, hosted at the National Library of Australia. This will be done by means of investigating some underlying principles for descriptive standards and conventions as of the library discourse which is the objective of bibliographic control and access. The reason to do this is to bring some main features of these principles into the context of a cross-institutional cooperation between libraries, galleries/museums and archives in a picture database service. The attention will lay on the objectives of what functions the system is designed to perform to give access, as defined by Elaine Svenonius in the Intellectual Foundations of Information Organization 2000, and how these objectives will affect this particular database-service collocating performance, which is a system- and logical approach. Though, this study will be done in an explorative and qualitative way, by a case-study, which is to examine some sample metadata records emanated from different institutions in this project.