LKABs infrastrukturavdelning är en sekundärproduktion och en stödjande funktion till primärproduktionen vilket gör att avdelningen utför många olika aktiviteter och är svårstyrd. Syftet med denna uppsats är att studera den formella och informella styrningen och dess styreffekter på LKABs infrastrukturavdelning med utgångspunkt i Simons Levers of Control Vid formell styrning såsom Simons levers of control, styrs företaget genom dokumenterade värderingar, gränser, interaktivt arbete och uppföljning. Informell styrning kan vara företagets kultur, ledarstilar, regler och normer som inte är dokumenterade utan informella. Både formell och informell styrning påverka en individs beteende det är därför viktigt att de som skapar formella styrsystem tar hänsyn till de informella faktorerna och att den informella styrningen är i linje med den formella styrningen och att det finns en balans mellan dessa på företaget för att nå önskade styreffekter. I denna studie har en kvalitativ forskningsmetod tillämpats med influenser av aktörssynsättet.

A piezoelectric injector was modeled, in this Master Thesis Project which was carried out at Scania CV AB in Södertälje, in GT-Fuel. GT-Fuel is simulation program from Gamma Technology.The simulation model for the piezo injector was divided into a hydro-mechanical system and an electrical system (Piezoelectric element). First the hydro-mechanic model was duplicated from Advance Continuous Simulation Language model (ACSL). The simulation results were then compared to the ACSL, to verify that the hydro-mechanical system was modeled correctly. The simulation results for the electrical model were also compared with a Simulink model.

Ett konsultföretag får in anbudsförfrågningar och måste därmed göra kalkyler för dessa förfrågningar. Med hjälp av ett webbaserat system där en anställd kan göra kalkyleringar kan företaget få ett gemensamt sätt att arbeta och uppföljningen underlättas. Systemet som har skapats ger användare möjlighet att göra anbudskalkyler genom en överskådlig och lättarbetad webbsida, där man kan se förhållandet mellan företagets kostnad gentemot kundpriset. All information lagras persistent i en databas för att möjliggöra uppföljning och synkronisering med andra system som används på företaget..

sustainable development by reducing the energy use by EU:s directive of energy efficiency and the UN Convention. The second purpose is to present the technical solutions regarding ventilation and heating system that is being used in passive houses. This was done using 8 passive houses, 4 germany and 4 swedish passive houses. Even the international and Swedish system requirements for passive houses have been addressed in this project. The goal was also to explain how and why the mechanical system in passive houses has developed to the technology used today.

The increasing complexity in the development of a configurable real-time system has emerged new principles of software techniques, such as aspect-oriented software development and component-based software development. These techniques allow encapsulation of the system's crosscutting concerns and increase the modularity of the software. The properties of a component that influences the systems performance or semantics are specified separately in entities called aspects, while basic functionality of the property still remains in the component. When building a real-time system, different sets of configurations of aspects and components can be combined, resulting in different configurations of the system. The temporal behavior of the system changes and a way to ensure the predictability of the system is needed.

I föreliggande studie undersöks hur användare upplever användbarheten i ett säkerhetskritiskt system ? Luftfartsverkets flygledningssystem SIGMA. Utifrån litteraturstudier definieras begreppen användbarhet och säkerhetskritiska system. Empirin utgörs av intervjuer med användare av SIGMA-systemet. Studien visade att användarna upplever att systemet i väsentliga delar har bra användbarhet, vilket utifrån litteraturstudier, intervjuer och efterföljande analys främst tycks bero på att systemet arbetats fram med stor användarmedverkan och att det var utarbetat specifikt för arbetsplatsen.

This project aims at investigating if the use of UML as a support to small-scale development ofan embedded system is relevant. The investigation is conducted by using UML during the initialphase of the development ofTelfafill, a filling machine by the company ?Telfafill AB?. The aimof the development of Telfafill is to separate the user interface from the control unit. In additionto this main objective, Telfafill AB would like possible changes to, and additions of,functionality of the filling machine to be investigated.Within the boundaries of this project, the development of Telfafill reached a full requirementspecification of the proposed system, and contact was made with potential external developers.No prototype construction had been started when the project ended.

In what French philosopher Gilles Deleuze labelled Control Societies, mechanisms reminiscent of censorship ? that is, restriction of information that administrators of power wish to regulate the spreading of ? are present in the concept of copyright. This kind of censorship has the advantage of not being scrutinized by public eyes in the way that the work of institutionalized censorship agencies such as the Swedish Statens Biografbyrå was. It is not unlikely that expanded possibilities for punishing anyone who spreads copyrighted material will result in larger and larger areas that may not be accessed, as the avoiding of conflict and repressive actions will emphasize the behaviour to take detours around information that is deemed taboo and therefore suspicious and dangerous. The ACTA trade agreement is one proposed tool for such extended possibilities for punishment.This essay does not however claim that copyright and censorship are the same ? but rather that the institutional execution of power that was previously a matter of state censorship has a lot of similarities with current and prognosticated application of copyright laws by corporations.

In what French philosopher Gilles Deleuze labelled Control Societies, mechanisms reminiscent of censorship ? that is, restriction of information that administrators of power wish to regulate the spreading of ? are present in the concept of copyright. This kind of censorship has theadvantage of not being scrutinized by public eyes in the way that the work of institutionalized censorship agencies such as the Swedish Statens Biografbyrå was. It is not unlikely that expanded possibilities for punishing anyone who spreads copyrighted material will result in larger and larger areas that may not be accessed, as the avoiding of conflict and repressive actions will emphasize the behaviour to take detours around information that is deemed taboo and therefore suspicious and dangerous.The ACTA trade agreement is one proposed tool for such extended possibilities for punishment. This essay does not however claim that copyright and censorship are the same ? but rather that the institutional execution of power that was previously a matter of state censorship has a lot of similarities with current and prognosticated application of copyright laws by corporations.While claiming to protect the individual, the disciplinary power executed actually aims to protect the one executing it; the purpose of the power structure is to replicate itself..

Dagens ERP-system ger företagen möjligheten att effektivisera och kostnadsreducera sina processer genom en mängd olika funktioner. Företag sätter idag stor tillit till sina ERP-system. Transaktionerna inom och mellan de olika systemen består av en mängd data som kräver övervakning och kontroll för att reducera riskerna med felaktigheter i den finansiella rapporteringen. En typ av verktyg för detta är automatiserade kontroller, vilka kan vara antingen av förebyggande eller upptäckande karaktär. Syftet med den här studien var att beskriva och analysera hur tre stora, svenska tillverkningsföretag använder sig av automatiska kontroller i sina ERP-system samt att jämföra hur deras syn liknar eller skiljer sig från revisionsbyråerna som dagligen arbetar med att utvärdera tillförlitligheten i den finansiella informationen.

Elever ska enligt kursplanerna i teknik få förståelse för de tekniska system de möter i sitt dagliga liv. Genom att eleverna får kunskap om teknik i allmänhet och tekniska system i synnerhet får de möjlighet att påverka sina liv som medborgare i en demokrati. I litteraturen saknas idag studier om elevers uppfattningar om tekniska system. Syftet med detta examensarbete är därför att studera vilka vardagsuppfattningar elever har om de tekniska system de möter i vardagen. Studien utgår från systemteori vilken ger en möjlighet att utnyttja det gemensamma mönster som kännetecknar analys av system.

Denna examensrapport redogör för en utvecklingsprocess av en webbasserad släktforskningsapplikation, där resultat från släktforskning kan delas av flera aktiva släktforskare. Genom att grundligt undersöka olika datamodeller och befintliga applikationer försöker arbetet säkerställa grunden till en unktionell webbapplikation. Arbetet ledde till en betaversion med begränsad funktionalitet som skall vidareutvecklas i framtiden till ett GNU/GPL projekt med öppen källkod för gratis användning och nerladdning. Målet med arbetet uppfylldes i stora drag, det frångicks dock lite på grund av tidsbrist som uppstod i samband med prototypprogrammeringen..

This examination report is a part of a program for Industrial organisation and Economics with specialization in Logistics and Management at Jönköping University. The report contains an analysis of the internal material handling at Kongsberg Automotive, and also an improvement proposal for a new material handling system.The aim with the report is to find a better material handling system and also make an analyse of the existing system. The goal is to shorten the distance for the operators when they order material, and also to increase the productivity.The investigation methods for the report have for the most part consisted of observations and interviews of key-persons who daily work in the production. During some time the actual material handling-system has been observed and some shortcomings have been discovered, and these are also discussed in the report.The shortcomings that have been discovered are for once the indistinct signal that should signal need of material in the production. Some other activities have also been discovered that does not bring any value into the final products.

Abstract Title: A messy story ? a case study of Secorocs process flow of DTH-pipes Presentation date: 2010-06-02 Course: Bachelor thesis in businessAuthor: Kristoffer ForsmanAdvisor: Kjell GustafssonKeywords: Management control, process control, lean production, process flow analysisPurpose: The purpose of this bachelor thesis is to develop an overview of the process flow for a specific product, and with the help of this mapping based on a lean production philosophy show possible improvement proposals and how these can lead to a more efficient process flow.Methodology: I have used a case study of Secorocs DTH-pipes and my primary data are gathered through interviews and observations. I have used theoretical framework to establish a process flow analysis. This is to obtain data on process activities and whether they are creating value or not. This leads to a current mapping of the situation in Secoroc on DTH-pipes and then analyzed and suggestions for improvement are developed.Conclusions: That by using the above mentioned mapping of process flow of DTH-pipes, problem areas could be illustrated.

Title: Management control of facility efficiency in municipalities - A case study of Halmstad municipalityLevel: BachelorSeminar date: 2012-05-31Authors: Markus Nilsson & Sara MattssonAdvisor: Sven-Ola CarlssonKey words: Control management in municipality, facility efficiency, management by objectives, internal rents and incentivesBackground: The public sector owns and manages a large property portfolio and in the municipalities, the properties are always a big cost item. Because of the outside world changes and the public interest, the properties should be used as efficiently as possible.Purpose: The purpose of this paper is to describe how control management of facilities looks like a municipality. The paper also seeks to explain how employees work to make the facilities more efficient in a municipality.Methodology: The authors use a qualitative method with open interviews.Theoretical perspectives: The choice of theory was made with the field of management control and facility efficiency in mind. The theory therefore includes management by objectives, internal rents and reward systems, motivation and communication within organizations.Empirical foundation: The organization has undergone a reorganization 2010/2011. There are no clear incentives to reduce facility costs.