The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

The thesis has investigated how Sandvik Coromant could implement the SMED principle on one of their grinders groups and what improvements it would lead to. The aim of the thesis is to identify the current situation and investigate how their setup times would be affected by SMED. The work initiated with a literature analysis about the SMED principles and then proceeded with an analysis of the current situation where the activity was time mapped. The analysis consisted of time trials of the process that the thesis would include. The time studies revealed opportunities for structural improvements to create environment for a more structured process.

The purpose with this report is to give structure to the storage area betweenproduction and packaging at Spaljisten AB in Åseda. The purpose is also to givesuggestions for improvements of work tasks and thereby simplify and improve thematerial handling at the packing process.The background of the task is that Spaljisten AB is going to increase theirproduction and thereby they also need to increase the packing rate of theirproducts. They will manage this by installing a new automated packing line andincrease the efficiency of the old manual one. The theoretical background ismostly obtained from literature which contains relevant facts for our report.The storage area has been studied visually in order to search for improvements oftoday?s layout.

The project was conducted during a period from November 2014 to January 2015 at the company Westermo Teleindustri AB (WTE). The subject of the project was to make an inventory more efficient. The inventory was located at WTE, but was owned by the subsidiary Westermo Sverige (WSE).The inventory had a high amount of tied up capital. This was due to products that hadn?t been sold.

We were commissioned by Bulten Stainless AB to identify and analyze their customer order flow. Because the company had problems with delays in the production and deliveries to the customer, the task also included investigation of how the company work with prevention and management of delays. The purpose of the project also included to identify critical factors for effective order flow in smaller workshop companies.The information about the flow and how the work takes place within the company were collected through observations on the company and interviews with the staff. This information was used to draw maps over the customer order flow and to write a description of the current situation within the company. Both strengths and weaknesses of the companies work could be identified through analysis of the present situation.

Trioplanex International AB is a part of the group Trioplast Industrier AB, which produces packaging materials for the film and hygiene industry. The group is active throughout Europe, where most of the production is located in Sweden, with head office in Smålandsstenar. Operations in Landskrona consist of Trioplanex International AB and Trioplast Landskrona.Semi-finished articles consisting of paper cores, so called bobbins, give rise to a high amount of core waste in any form of core cutting. The objective of the report is to map out all core waste and illustrate the material flow with regard to present layout and equipment.In the beginning of the project an analysis of the current process was carried out with focus on the cutting equipment. A case study in the form of an improvement work took place in order to reduce the causes which had the biggest impact on existing machinery.Improvement proposals were discussed by the author together with supervisor, assigner and other parties involved.

En förändring är ett tillstånd som vi upplever under hela vår livstid, både privat och i arbetslivet. Företag måste förändras för att kunna bevara sin konkurrens-kraft. Motstånd till förändring kan anses som det största enskilda hotet mot ett framgångsrikt införande av en strategi på ett företag. Ett sätt att hantera detta motstånd är att använda sig av den delaktiga förändringsmodellen samt stävja rädslor och osäkerhet. Syftet med detta examensarbete var att vi ville få en ökad förståelse för hur företag arbetar med produktionsförbättringar och om de känner av något motstånd vid dessa förändringar. De intervjuade företagen anger som sin absolut största förändring deras införande av ett eget produktionssystem med stort fokus på Kaizen ? Ständiga förbättringar. Under arbetets gång stötte vi på en psykologisk och vetenskaplig teori om Förändringens fyra rum som anses vara ett kraftfullt hjälpmedel vid alla förändringar..

The problems around and the planning of wood flow is some of the most complex issues in the forest-sector. The experience and overview of the single employees is crucial for the possibility of correct tactical and economical decision-making. The increasing demand of savings and shorter reaction-times with greater flexibility in the wood-supply-chain, makes solutions and aids for improved effectiveness in the work and processes according to wood-flow urgent. Holmen Skog is starting to develop a new forest-road-management-system. The system will facilitate the work according to construction, improvements and updating the standard of roads.

Approximately 20% of the milk within the udder of a cow is stored in the cistern and immediately available for milk removal, while activation of the milk ejection reflex is required for removing the remaining milk stored in the alveolar compartment. The aim of this literature review is to describe, evaluate and consider implications of the three different suckling activities that the calf displays during a suckling bout. In terms of milking, these phases are represented by pre-stimulation, stimulation during milking and post-stimulation. Pre-stimulation is commonly performed in order to induce the milk ejection reflex, whereby the hormone oxytocin is released and the alveoli in the secretory tissue are contracted. Time requirements regarding pre-stimulation must be considered in relation to lactation stage and milking interval.

Currently there is a controversial debate about that we must reduce our impact on the global warming; therefore both the Government and the local authorities have invested heavily in developing renewable energy in Sweden. The major development on the wind power market can be seen as a result of both the technological development and also on the decision that the Government took in 1996, which opened up the wind power market for private parties.This paper has aimed to examine the types of financial innovations that have arisen from the investments and financing of wind power on Gotland, and what these innovations can contribute to the future development of wind power.The problems that this thesis is based on is; what kind of financial innovations have occurred within investment and financing of wind power? How can these innovations contribute to the continued development of wind power on Gotland? The conclusion of this study shows that respondents and participants have defined a number of financial innovations that have emerged. Where some of the innovations only can be seen as incremental since they are based on Continuous improvements, while others can be seen as radical as they are completely new for the context in which they operate. The study has also shown that Gotland has a great potential to produce more renewable electricity, but the development is dependent on the new power lines being built, in order to export electricity to the mainland..

This paper is about the new methods and metrics used in industry and business today striving for better revenues and larger market shares. It investigates the relations between the old fordistic and tayloristic way of manufacturing and compares it to the models used in industry today for being competitive, seeking to please customers and becoming more flexible. More specific the paper is about if Six Sigma and lean production are the key for succeeding these days. SKF:s factory in Gothenburg and other companies will make an example for how these methods are used in practice.The aim is to try to answer if these systems with inherited tools and methods are the right way to get the flexibility that is needed for being able to deliver the right goods to customers and market. For a company to be flexible decisions must be made fast and needed changes must be able to be done easy and without too large costs and investments.

Lean production härstammar från företaget Toyota och Taiichi Ohno?s begrepp ToyotaProduction System. Metoden är idag ett dominerande styrmedel bland organisationer. Därmedhar konceptet implementerats i allt fler västerländska resultatstyrda organisationer, varsparametrar för kontroll skiljer sig mot de lean production utgår från. Dess innebörd sträckersig över stora delar av en organisation, vilket bidrar till begreppets komplexitet.

This report describes an bachelor thesis work which is performed in cooperation with SVIA that develops and sells automation solutions for the manufacturing industry. The thesis purpose was to evaluate the machine FeedLine to find opportunities for improvement in the product?s design that could lead to more standardization and thus improving the efficiency of manufacturing and assembly.Based on these basic issues suggestions for improvements were developed:How can the design of FeedLine be improved to facilitate the assembly?Can more standardization be imposed on FeedLine?s design to enable more stocking of standard components?An initial pre-study was conducted to evaluate FeedLine?s to find opportunities for improvement in its overall design. During the pre-study staff at SVIA and two of its clients was interviewed. Based on information gathered during the interviews and observations by the authors improvements was amendments.

This thesis investigates lacks in today?s use of the ERP-system Mapaz Affärssystem inthe production planning at Solna Pressgjuteri, and possible improvements. Today thedates calculated by the program to plan the orders are inaccurate and the ordersequence is not optimal, and therefore continuous manual corrections are needed.The approach was to study the program Mapaz to understand how it works, andidentify available parameters for input and output in the different tools offered in theprogram. By studying old lists of planned orders and relevant parameters in Mapaz forindividual orders, production groups, products and operations, the connectionbetween input and output parameters could be understood.Participating in planning meetings and discussions with the company behind theERP-system identified the current usage, desideratum and possibilities with theavailable tools. These were then matched to describe the reasons to the insufficientplanning and form possible actions for improvement.The work has showed poor understanding for the ERP-system and its functions, assome tools intended to assist the planning were not used, and some even usedincorrectly.

In the process laboratory of Metso minerals (Sala) AB, continuous tests have been made with a laboratory unit High-Rate thickener. The tests are made in order to compare three methods of thickening techniques of suspended solids. The three techniques are High-Rate thickening, conventional thickening and lamella thickening. The High-Rate and the conventional trials are based on a continuous method, while the lamella thickener is based on batch trials. Because the lamella thickener is based on batch trials and there were some optimization problems with the adding point of the flocculant at the continuous trials, it was not feasible to compare the lamella thickener with the other two thickener types.