Sök:

Sökresultat:

1006 Uppsatser om Continuous improvements - Sida 4 av 68

Belastningsskador vid montering : Påverkan på svensk tillverkningsindustri och hur effektivt förebyggande kan bedrivas

AbstractAccording to research made by Statistics Sweden on the members of the labor union IF Metall the number of reported musculoskeletal disorders for employees working under the collective bargaining agreement for the automotive industry has almost doubled since 2003. During 2004- 2006 and 2008 male assembly workers were the occupational group with the highest amount of reported work related disorders in Sweden. To prevent musculoskeletal disorders is according to Rose and Orrenius important both for the individual, the society and the industry by reducing economic and personal costs. The purpose of this paper is to identify and analyze how the manufacturing industry is affected by musculoskeletal disorders that occur when working with line assembly and how companies can prevent them. The report aims to provide the reader with an understanding of what musculoskeletal disorders are, to which extent they occur in assembly, how companies are directed by laws and regulations and how they affect the Swedish manufacturing industry and their employees.

Standardiserat arbetssätt för kunskapsprocesser : ? En fallstudie på en prototypverkstad

In recent years, Lean has been implemented in a variety of companies with focus areas that differ from the conditions that characterizes manufacturing. This transfer has contributed to fairly superficial results because companies almost exclusively focus on Toyotas methodology and not on the goal of Lean. The effort of transforming Lean from manufacturing to any organization requires a definition on a general level and a view of Lean as a system. One of the core principles of Lean and the foundation of Continuous improvements is standardized work. In product development there is a negative view on standardized work, where the engineers state that the principle is not applicable for knowledge processes that include non-repetitive and creative work.In the framework of this master thesis literature has been studied to find support that standardized work is applicable for product development and areas that include knowledge processes.

Undersökning av fasadskivor

The purpose of this report is to present some of the market's façade panels and to do a survey of Masonite façade panels and compare. Therefore I have looked closer on potential competitors and studied their assembly method and properties. I will also propose suggestions on installing Masonite panels and improvements to the current carrying system. The carrying system for façade panels in general. Various key people in various areas of the construction industry have been interviewed. People with a wide knowledge of theory and with real work experience have been my main focuses too implement this survey.

Kalkylering i flygbranschen: En fallstudie av ett flygbolag

The purpose of this thesis is to analyse and propose improvements to the cost accounting system in use at an airline operating on the Swedish market. The choice of study object is based on the airline?s desire to have its cost accounting system evaluated. During the analysis we have identified a number of points where the current cost accounting system does not correspond to its intended purpose. These points include significant groups of costs not being considered in the current system, potential over capacity is not visible and logic connections between distribution keys and the use of resources are sometimes lacking.

Diskontinuerliga Galerkinmetoder för initialvärdesproblem och prissättning av optioner

Efficient numerical methods for option pricing is an active field of research. This project has the goal to examine possible ways to improve an established method of numerical pricing. The method is based on an adaptive finite difference method in price and uses the backwards differentiation formula of order 2, BDF2, in time. The project will focus on improvements to the time integration through implementation of discontinuous Galerkin methods, dG. Empirical convergence and accuracy results are obtained for equidistant dG-methods up to order 3 and performance is compared to BDF2.

Minimumkrav för ett CI-system

När en grupp utvecklare jobbar med samma kodbas kan konflikter uppstå med avseende på implementationen av moduler eller delsystem som varje utvecklare individuellt jobbar på. Dessa konflikter måste snabbt lösas för att projektet ska fortskrida och inte stagnera. Utvecklare som sällan kommunicerar framför ofta okompatibla moduler eller delsystem som kan vara svåra eller omöjliga att integrera i kodbasen, detta leder ofta till s.k. ?integration hell? där det kan ta väldigt lång tid att anpassa ny kod till en befintlig kodbas. En strategi som man kan ta till är ?continuous integration?, ett arbetssätt som erbjuder en rad fördelar när man jobbar i grupp på en gemensam kodbas.

Framgångsrik Implementation av Lean : Förbättrade möjligheter med implementationsmodell

Lean production is the name given to Toyota?s Production System (TPS) by the west. The Continuous improvements of their operations through Lean has made Toyota into the largest car manufacturer in the world. This, in turn, has led to several studies regarding both Toyota and their system as to find ways to apply Lean in other organizations. Even so, over 90 percent of all companies fail to implement Lean.

Effektiv Mjukvaruutveckling Med Continuous Integration Och Automatisering

Effektiv utveckling kan göra lika stor skillnad som en eller kanske två extra utvecklaretill teamet. För att ligga i framkant i effektiv mjukvaruutveckling så måste mandefiniera hur man är effektiv och vad det innebär. Man kan med stor framgång se sigom kring hur andra företag och organisationer har uppnått högre effektivitet.I rapporten diskuteras best practice och hur R2Meton AB jobbade i början av 2013.Sedan presenteras en utvecklingsmodell som R2Meton AB har implementerat för attbli mer effektiva. Modellen innefattar bland annat automatiserat bygge, tester,analyser och distribution. En högre grad av automatisering och analyser innebär enstörre enhetlighet och kvalitet.

Latitudinal patterns in body size of Roesel?s bush cricketMetrioptera roeselii within and outside the continuous area of its distribution

Over time, species colonize new areas naturally or through humans. The colonizers areoften few and founded populations represent only a fraction of the genetic diversityexisting in the original population. If the established population becomes isolated afterthe colonization event genetic diversity will remain low and if the population, in addition,remains small in size for an extended period this will lead to increased inbreeding andpossibly inbreeding depression. Metrioptera roeselii is a common species with awidespread distribution in continental Europe. During the last century, it has expanded tothe Scandinavian Peninsula which is separated from continental Europe by the Baltic Sea.My aim was to test the hypothesis that individuals in isolated populations in Scandinaviaincluding Denmark and the Baltic Sea islands are smaller than individuals in thecontinuous part of its distribution due to low genetic diversity and lacking incoming geneflow.

Orsaker till kolik hos häst

The aim of this work was to investigate possible risk factors for colic in horses, and to describe what horse owners can do to prevent this condition. The gastrointestinal system of the horse is constructed for continuous high fibre consumption for a period up to eighteen hours a day. Under those conditions, the continuous flow of digesta stimulates gut motility so that the intestines move constantly. When the diet is changed rapidly and the horse is being fed high rations of concentrates each day, the risk of getting colic is higher compared to when consuming less concentrates and giving the horse a stable diet. Lack or absence of access to water and restricted allowance to move freely every day increases the risk of colic. Changed management practices and decreased activity contributes to increased risks, as well as other critical risk factors such as breed, season and age combined with rapidly changed management. More knowledge and education is required of the horse owners about feed requirements in the horse, management routines and rapidly changed activity..

Människans roll i skogslandskapets trädslagssammansättning, en studie i Ångermanland

Human presence has always influenced the surrounding areas, the forest as well. Structure and species composition have changed during human land use. Knowledge regarding these changes should be of great interest for conservation and forestry. We have analyzed human impact on the tree species composition on five study sites during 2000 years in Ångermanland, Sweden. More specifically the change in tree species composition in percentage amongst alder, birch, spruce and pine over time.

Inventory and evaluation of Nairobi Animal Orphanage : focusing on routines and feeding, black-backed jackal, lion and patas monkey

This BSc thesis is an introductory step to the collaboration between the Swedish zoo Skansen and Kenya Wildlife Service (KWS). It constitutes of an inventory of the Nairobi Animal Orphanage (AO), a facility that cares for injured and abandoned wildlife species in Kenya. Through the cooperation with Skansen, the KWS will improve their management of the AO. The aim of the inventory and BSc theses is to evaluate the management of black-backed jackal (Canis mesomelas), lion (Panthera leo) and patas monkey (Erythrocebus patas) regarding their biological needs. The general enclosures, routines and feeding at the AO are also evaluated since they have a great influence on the management of captive animals.

Stadsdelsförnyelse på Öster i Gävle : En analys av fysiska faktorer för en bättre boendemiljö

Nearly 50 years after the building of the first million programme neighbourhoods many Swedish municipalities faces an extensive restoration work in these neighbourhoods which during their relatively short lifetime have acted as a target for a large amount of criticism. Öster in Gävle is a million programme neighbourhood that has gone through an extensive restoration between 2001-2009 with the aim of improving the living environment. Improvements have been made in the outdoor environment, to the facades of the houses and the entrances? of each building. The purpose of this study has been to investigate the effects of the renewal in the physical outdoor environment for those who live in the neighbourhood.

Lean leadership : the Toyota way in agricultural firms

Swedish agricultural businesses are facing challenges in order to achieve long-term profitability. The opportunity to improve profitability and efficiency on farm level may be enhanced by management. One way to work with leadership is to use Lean. It is a management system that aims to improve competitiveness. Currently, there is a project where Lean is implemented into 100 agricultural firms.

KBT och mindfulness i gruppinterventioner för insomni: en randomiserad, kontrollerad studie

There is strong evidence that cognitive-behavioural therapy for insomnia (CBT-I) is effective. The aim of this study was to compare 7 group-sessions of mindfulness-based cognitive therapy for insomnia (MBCT-I) with 3 group-sessions of CBT-I, on sleep measures and sleep related psychological processes, such as pre-sleep arousal, thought control strategies and mindfulness. Participants (N = 44; age 18-66) with long term insomnia were stratified and randomized into waiting list, MBCT-I and CBT-I. Significant improvements were seen in both groups, compared to waiting list, for instance on insomnia severity, sleep latency and restorative sleep. Small improvements on psychological processes were also found in both groups.

<- Föregående sida 4 Nästa sida ->