Choosing a new plastic material for a container includes several different steps. In this case,the Finnish company Hackman needed a new type of packaging material for theircutlery- and kitchentool series »Hackman tools«. The project was carried out in cooperationwith the design agency Ytterborn & Fuentes, which has Hackman as a client.Several different demands were put on the material in order to fulfill as many of the clientswishes as possible. The most urgent problem with the existing container was the difficultysfor the customer to clearly see the contents in the container. Because of this problemthe customer tried to open the container in the shop.

This thesis work aims to describe the prerequisites for a distributed treatment platform for real-time sharing of rounds performed by paediatric oncologists. The work started during the autumn 2004 and is directly aimed at improving the situation for the thirty or so specialist treating children with cancer. The work is not limited to the description of such a platform but also to select suitable software and hardware for the implementation of the platform and further more to coordinate the implementation. The production of several documents describing the platform is also part of this work. The work successfully led to the implementation of such a platform as described in the published article Barnradioterapi på distans Kristenssen et.

Cement manufacture accounts for 3-5 percent of total global carbon emissions. There is a growing interest in reducing the environmental impact and conserve limited natural resources. In cement production, clinker productions consume 87.5 percent of the total energy consumed in the cement manufacture.Cementa has since many years, focused on reducing the environmental impact of cement production. The work has involved the entire production process from selection of alternative fuels to the development of cement with less clinker content. During 2013/2014, two new types of cement (Bascement and CEM II / B) will be introduced to the Swedish market.

AbstractBuilding Information Model/Modeling/Management (BIM) is a tool that allows for efficient working methods. BIM saves time and money while providing the potential for visualization. This method of working is based on a 3D-model, and then a fourth and fifth dimension are connected. 5D modeling means that a spreadsheet creates cost estimates based on the 3D model. This provides opportunities to carry out calculations in the early stages of the projects. Calculations are currently performed manually and do not contribute to the development that the construction industry requires.

Our Bachelor?s Thesies has been performed in co-operation with Cellplast Direkt AB inLaholm. Our task was to develop a construction that cuts gussets to ceiling disposition as isused to isolation.Our goal with our construction was to increase the degree of automation so that theproductivity increased and also meet the market which is getting tougher and tougher due tothe future business cycle.Cellplast Direkt gave us free hands in order to enable new ideas. A pair different principleproposal was developed and prepared to a final structure.The Bachelor?s Thesies resulted in one PLC - governed machine with three engines that runthree different moves, wich does that the degree of automation increases and the risk forerrors decreases.We have developed a complete production bases to Cellplast Direkt and our hope is that thecompany comes to produce the machine in the future..

The purpose of this Master?s thesis is to investigate a few economy students? perceptions of user education connected to essay work, focusing on aspects of information literacy of importance to the studies and the role of the user education in this context. The study was conducted with a qualitative approach. Five economy students were interviewed regarding their experiences of working with information, their perceptions of user education and its impact on their essay work. The interviews were transcribed and analysed with Bruce?s (1997) relational model of information literacy.

Titel: Investeringsuppföljningar ? En fallstudie på Volvo Construction Equipment i BraåsSeminariedatum: 2011-06-01Ämne/kurs: 2FE13E:3Författare: Aleksandar Stamenkovic och Donald BergströmHandledare: Anders JerrelingExaminator: Fredrik KarlssonNyckelord: Post-audits, Capital Budgeting, Investments, Performance Evaluations, ROI, RI, AARRSyfte: Syftet med detta ämnesfördjupande arbete är att förklara de problem som uppstår när avsaknad av investeringsuppföljning föreligger, samt att förklara för hur rutiner av uppföljningar kan organiseras.Metod: Valet föll på att göra en kvalitativ fallstudie gällande Volvo Construction Equipment i Braås. Kvalitativa semistrukturerade intervjuer har utförts med fyra stycken respondenter på anläggningen. Detta ämnesfördjupande arbete har utförts enligt en deduktiv metod och en diskussion förs angående arbetets validitet och reliabilitet.Teori: Den teoretiska referensramen behandlar relevant teori gällande investeringar och uppföljning, vidare behandlas även kortfattat de metoder som används för att bedöma investeringars lönsamhet på Volvo Construction Equipment i Braås.Empiri: Det empiriska avsnittet redovisar data från de semistrukturerade intervjuerna som fördes med personal på anläggningen i Braås. Dessa bestod av ekonomichefen, controllern samt två projektledare.Slutsats: Resultaten som presenteras behandlar komplexiteten med att följa upp investeringar enligt dess faktiska kassaflöden och förkastar därmed en sådan uppföljning för Volvo Construction Equipment i Bråas.

The aim of this study is to examine which factors in a traffic wardens? situation at work that promote and which that inhibit satisfaction at work. The aim of this study is also to examine if there are any differences in the work experiences for traffic wardens that work alone versus those who work in a team of two. The following questions are examined in the study:?Which factors promote and which factors inhibit the work situation for traffic wardens??Are there any differences between traffic wardens that work alone and those who work with another colleague?The selection consisted of eight traffic wardens, of which four of them work with another colleague while the other four work by themselves.

The aim of this study is to examine which factors in a traffic wardens? situation at work that promote and which that inhibit satisfaction at work. The aim of this study is also to examine if there are any differences in the work experiences for traffic wardens that work alone versus those who work in a team of two. The following questions are examined in the study:?Which factors promote and which factors inhibit the work situation for traffic wardens??Are there any differences between traffic wardens that work alone and those who work with another colleague?The selection consisted of eight traffic wardens, of which four of them work with another colleague while the other four work by themselves.

The aim of this study was to examine how individuals with disability pension reason about a return to work. Action theory, as presented by Berglind, was used as theoretical approach. Qualitative interviews were conducted with five individuals who have disability pension due to mental illness. The respondents describe how they weigh benefits and disadvantages against each other. The main reason for a return to work is economical.

The project was performed in collaboration with Husqvarna, one of the world?s leading manufacturer in the market of electric outdoor products. The report is a thesis work of a bachelor mechanical engineer program, in the field product development and design.The project is a study of the development opportunities within drive belt for a gear driven gearbox to one of Husqvarnas petrol powered hedge trimmers. A big part of the project was also to find combinations of materials for all components in the gearbox, to reduce weight and maintain or improve the performance of the system. Belt drive was of interest to investigate as an alternative solution to the current design that can reduce wear on the system at a performance test performed in the company before the product is released to market.

The economic analysis of building contracts is an unexplored field within Law and Economics. This paper makes an attempt to cast some light over the subject and encourage to more research within the field. The main purpose has been to describe why the actual price in a public construction project often turns out to be higher than the contract price and offer a way of handle that risk. In the paper a model is set up that shows an optimal contract given expectations on actual price and gaps in contracts. Cost increases for the buyer can mainly be explained by two situations.

Abstract This essay is about girls that have chosen a gender atypical education on a gymnasia level. Since we are living in a society that is still today gender segregated in both working life as well as educational area, we find it interesting that it still exist an paradox which leads us to the question ?why? those girls and boys, woman and man choose so differently. We are not aiming towards study how many girls that have chosen a gender atypical education but rather how these girls that are on the construction program in one of Stockholm?s gymnasium have deliberated and what it is that has influenced them.

This is a technical report about cement stabilization in general and the stabilizationprocess during the construction of a warehouse in Halmstad, Sweden in particular and iswritten at the section for economy and technology at Halmstad University incollaboration with NCC Anläggning.NCC encountered variations in compression strength in the stabilized material on the firstwarehouse that they constructed for the company Biltema. In our report we used thestabilization process of the second warehouse for the same company as a reference todetermine what could be done to get a more homogeneous result for future projects.We also looked in to what testing method is the most suitable to determine the result ofthe stabilization.After interviews with people involved in the process and visits on the work site we havecome to the conclusion that the most probable cause to the variations in compressionstrength is segregation in the ballast material. This segregation can occur in severaldifferent occasions in the process such as during the production, transportation andhandling on the work site.Other causes for the variation can be improper compaction, overlapping stabilization insome places and different duration of hardening of the samples that are tested.The best way to do in situ test of the stabilized material is to do seismic investigations asthose are non-destructive tests in comparison to taking core samples and you can discoverany cracks or air bubbles in the material..

Work environment has been an important part of the Swedish working life for a long time and with the help of the Working Environment Law the work environment is mandatory. The purpose of this study was to gain a deeper insight into how the system of middle managers systematic work environment looks like. The question was: How do six middle managers perceive and deal with systematic work environment? A qualitative study was conducted with six middle managers from a global company. During the analysis, there were three main themes to be recognized (cooperation and support facilitates the work environment, problem with the systematic work and difficulties with staff) and six sub themes.